Below is the link to the LED bulbs that last much longer and makes it safer to see on the road: LED Bulbs: amzn.to/3W7auzU Both low and high beams: amzn.to/3S4bWBM *DISCLAIMER: The above links are affiliate links. This costs you absolutely nothing, but pays me a small commission and helps me continue to create this FREE content.

I watched several 2014 Jeep GK LED install videos and this is the best, especially for people like me who don't work on cars for a living. Removal of the parts was easy to follow and I appreciate seeing the force needed to remove the air intake parts. Most other videos gloss over this issue. I had no concerns when I removed mine.

I’ve got a 2019 high altitude and instead of a cover that twists off it’s a rubber boot that you just need to pull off. In case anyone was wondering. Thanks for the video :)

Thanks for the video, this is the 2nd time I had to replace the driver's side bulb. First time was a complete nightmare, this time it was done in 10 minutes.

I tore up my hands last time I had to change a bulb. This is gold!! Ty!

I’m a 59 female that was in need to change the low beam. Guess what, thanks for this video, I was able to do it by my self. Long time that I did feel so good with myself! Thanks

Thank you, my new good friend. Saved myself from paying$1500 at the dealership.

Thanks for the video! I was able to swap out the driver side. I noticed in some of the comments you asked if you should make a video showing how to make the PVC pipe tool for the passenger side. Yes, that video would be super helpful!

Great video I saved $200 off what the dealer would have charged me. Driver side was much harder due to the dealer pinching the harness against the bulb housing when they replaced the bulb in 2023. I had to gently disconnect the harness holding the bulb BEFORE twisting to remove the burnt-out bulb. You need pretty good strength to twist out the old bulbs and having smaller hands helps. I recommend wearing a set of surgical gloves to prevent skin loss on your hands. I did replace the halogens with the LED's recommended in this video from Amazon for about $40. They appear to be much brighter and whiter than the halogens. I can't wait to give them a try them out on a dark country road tonight. Thanks for posting this video its great!

Flawless video. Took 5 minutes. Awesome walkthrough! 🙏🏽👍🏽💪🏽

Oh my gosh this is much harder than it should be (especially the one behind the ECU)!! And both going through their port hole is a joke!! I am not that big of a guy but do have pretty big hands and without your suggestion of the pvc I would have struggle much longer (I knew I was going to need some additional leverage to turn that bulb but was having a hard time coming up with the right thing; the notched pvc was the ticket). Thanks so much!!!

Gracias x el video muy útil para cambiar los de mi camioneta Cherokee 5.7

Great tutorial as always! Love seeing you step into a new realm of videos

Thanks for the information had to make the PVC pipe tool to remove passenger side

Thanks for this video, was the best, the rest were made to complicated

Great video. Used it twice now for changing driver then passenger side (should've just replaced both at the same time 😂). I wish I didn't have big hands, it does make it harder to get the bulb in and out.

Aye bro u the goat ! STEP BY STEP IS AMAZING EVEN THE REASSEMBLE

Thanks for this video - helped me a lot. Changed both low beams in ~30 min on my 2014 Laredo

I just did this today. It worked. My hands were too big, so my son removed the bulbs. He's 12 😂😂😂

Whoa! This is gonna save my hubby a couple hundred dollars! And his hands! Thanks!! #savingmoney #carrepairs

Great video! Saved me time AND money!!⭐️⭐️⭐️⭐️⭐️

Mine was on the driver side… don’t even bother going through the wheel well, my 7mnth old wouldnt even be able to get her hand in there… But, after removing the air filter housing it opened it up a bit, still hard to get leverage and you’re pretty much blind while doing it. All that being said it’s doable if you have some time on ur hands save the money! Appreciate the vid!

What kills me is they made oil changes a breeze with the top filter, but then made the headlights a pain. I can change the oil faster than headlights.

Definitely using this next time my #grandcherokee needs a headlight changed. Nice explanation!

Thank you for the great tutorial and showing how this can be done safely and and more efficiently. Dealerships probably know this shortcut but don’t want to share cause then they would loose business. Appreciate you putting this video together. Haven’t seen this option before.

Changing 2019 grand cherokee low bulb this weekend thanks to ya. Curious what bulbs does it use for low beams wanna def make the switch to led was curious if there was a cheaper option than these bulbs. Also do they throw fault codes?

Excellent video! Explains it for the novice Mechanic as well as intermediate! But I have one question. And pulling off the bottom housing under the air filter with the grommets, a clip came off. I have no idea where it goes back on. Any ideas?

Please don’t worry yourself about it. I found out where it came from. It’s the clip that holds the cover of the air filter housing on from the bottom of the housing. The bottom housing pieces snapped off inside the clip. I guess I need a whole new bottom housing now

I must have the only 2017 Grand Cherokee on the planet that has a setup not allowing bulb changes. Driver side low and highs not working. Mine looks nothing like this and when pulling that round plastic cover off after romoving the air box, there appears to be a metallic braided harness attached to a plug that's attached to a shiny square metallic box about 2 inches by 2 inches. It will not budge. The high beam has NO wire or connector anywhere to be found. Looks like a sealed unit. On some of these Jeeps, do you have to replace the entire headlamp?

Great video. Following you now.

helpful walk through - thanks Dan! 👍🏼

Great tips, my passenger bulb is stuck. Do you have a photo of the pvc pipe you described??

Seems like much easier access since engineers seem to hate mechanics.😂

So I just bought a 2021 GC and was wondering if the LED bulbs were plug and play without having to get any kind of wiring kit.

I tried and couldn’t get my hand in to turn the bulb. What tool are you using?

Does that LED bulb require one of those CANBUS adapters on these Jeeps? I have a 2019. Also, great tutorial. Thanks for that PVC trick. I might need to try that on my passenger side since it doesn't want to budge.

Bro how did you fit ur hands in the passenger side one even with the computer moved i cant get a good grip on the bulb

Driver side worked, but passenger side has the coolant in the way on '16 Grand Cherokee. Update: went under the coolant and was able to reach it pretty easily. 👌🏾

The link you provided is not working

Wow, so much easier!

I'll take "what were the engineers thinking" for $500 Alex. So stupid to have access in the wheel well. Nice and easy alternative though. I'm sure the Jeepers will appreciate it.

💪🏾‼️‼️

I tried to change passenger side no way could I get my hand in to turn bulb

No baby hands...I'm going through the top

Not helpful at all. How bout explaining how to twist the bulb out

Great tips, my passenger bulb is stuck. Do you have a photo of the pvc pipe you described??