Bought 5 months ago a 2007 with only 80k miles. Love it. Same color.. Rides high and solid. .
@FunandAutomotive3 жыл бұрын
Excellent! 👍
@aeguzman693 жыл бұрын
You need spacers between control arm and ball joint for better camber and more room between control arm and spring
@MrMandala1111 Жыл бұрын
Hey man. I have a KK, same jba uca's. I am about to fit new upper bj's and I just heard back from jba about the bj placement and this is their reply copy and pasted " The ball joints should be mounted in the traditional manner, on top, this provides a failsafe in the event that a trail impact or traffic accident breaks the mounting bolts. The flange of the ball joint is too big to fit through the hole so the suspension stays together and the truck remains under control. If the same thing happens with it mounted on the bottom the suspension comes apart and bad things happen". So I will stick with the normal mounting.
@TSuave3 жыл бұрын
Hey man! Love your videos can't wait to lift mine, just a heads up on a few things! The front diff is aluminum, a lunch box locker will stress and break it when it locks. Use a Detroit Tru track, it's a very high quality limited slip. Another thing that may help you get those spacers outta the rear stock jku spring will give you 4" of total lift (then just find a way to get your extra 1")
@FunandAutomotive3 жыл бұрын
Okay Thank you for the heads up much appreciated! 👍 And I'm glad you like the vids too!
@drgonfli73 жыл бұрын
I love it lifted!
@FunandAutomotive3 жыл бұрын
Thank you!!
@Gokywildcats1111 ай бұрын
Very nice jeep
@joegriffin66993 жыл бұрын
Looks really good now. Well done.
@kevingalarza760 Жыл бұрын
I think the 2.5lift on the larger tires looked good the 5 inch was to much
@2StallGarage6 ай бұрын
Good video. Thanks.
@alfredoesparza56232 жыл бұрын
I would love to do this to my 02 Jeep Liberty limited (2wd)
@psenrique2 жыл бұрын
Me encanta tu KJ! 😍 Voy a iniciar mi proyecto desde México 🇲🇽
@pat14lang3 жыл бұрын
I have a 2011 Dodge Nitro (same as the Liberty KK). I have OME Front and rear springs, Bilstein 5100 front and rear shocks, custom made strut mount (similar to Daystar strut mount), Teraflex front bump stops, Crown Automotive custom made SS braided brake hoses, SPOHN Performance custom made rear track bar, added “hockey pucks” for the rear bump stops, and JBA UCA’s with the new style ball joints and boots. Currently looking at a ball joint spacer to move the UCA’s back up some. UCA mounting pockets have been trimmed for more drop. Also looking into making my own front coil-overs for the future...
@FunandAutomotive3 жыл бұрын
Nice! I would like to see a pic of yours 👍 here's a link for the upper control arm spacers this guy makes them from russia just message him about them facebook.com/arm34.ru/
@fleshfries3 жыл бұрын
@@FunandAutomotive Figured I'd share my experience with my '12 KK. I tried these spacers out at 4" of lift to try to eliminate spring contact I was having with the JBA arm and OME spring (I have the same lift as you, Bilstein/ome set to 4th rung). Adding them did eliminate the contact however it caused my camber to be wayyy too positive. It looks like your camber bolts have alot of room to be pushed out so you may be ok with them. I attempted to remedy the camber issue with camber spacers that go in between the knuckle and the wheel bearing which did help however the camber spacers I was using are actually meant to add camber, not subtract. I used them upside down as a result and it seemed like it would work. At that point I'd need to do a cradle drop and it's getting cold so I may experiment more next year.
@pat14lang3 жыл бұрын
@@FunandAutomotive i’ll be sharing a video when I can. Currently out of state working and have some parts ordered that I need to i stall. Hopefully have a video beginning of next year
@FunandAutomotive3 жыл бұрын
nice I like the Kks 👍 and is the cradle the same as kj? And you should share some pics as well of your jeep 😎
@fleshfries3 жыл бұрын
@@FunandAutomotive The sub frame is definitely similar, can't say it's 100% the same. I've read that I may run into issues with the steering column, did you have that issue at all when dropping? Unfortunately as the arm raises, it pushes the tire out adding positive camber. If you can find a machine shop to make Camber shims that are the opposite of the SPC camber shims you'll be in business (These: www.amazon.com/Specialty-Products-26014-FRONT-CAMBER/dp/B00N27PSRS/ref=asc_df_B00N27PSRS/?tag=hyprod-20&linkCode=df0&hvadid=312442771380&hvpos=&hvnetw=g&hvrand=12755685511497871772&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9002030&hvtargid=pla-572399123678&psc=1). You can flip them upside down but it will push out the lower rear side of the tire more than the front. Here's some pics of the KK as well as pics of the spacers I had on while front was sitting at 5" lift. ibb.co/YkCwRxM (full droop, no BJ spacer) ibb.co/JjSLZXm (full droop w/ 1" BJ spacer, sway bar disconected in pic. There is no contact while at full droop, almost looks like you could get away with 3/4" instead of 1") ibb.co/3cwLDV6 (Full droop w/ 1" BJ spacer. No contact. However front camber is way to positive. Hopefully your cradle drop addresses that without needing extra camber spacers.) ibb.co/5vP1Lrz (The ol KK while I had her at 5" up front. Now Im back down to about 3.75" just straight Bilstien top rung/OME springs) I also had a 1/2" clevis spacer, but in the end, even if I made room for the droop my CV axles would be toast. The arm hitting the spring was essentially saving the CV from maxing out too far since any spacer added outside of the strut itself with JBA uppers will have spring contact at full droop. That's why I feel this setup may work with your dropped cradle. Either way, thanks for sharing your info on the drop, hopefully you can get it to play nice!
@RF-vv8mw3 жыл бұрын
Good video, Jeep looks great. Did you run into any issue with the steering wheel shaft binding with power steering rack OR engine fan hitting the fan shroud/radiator area? Did you find a suitable upper control arm ball joint spacers? Thank you.
@FunandAutomotive3 жыл бұрын
Thank you I did not have any issues what so ever with the lift/subdrop I also did not fun a control arm spacer as of yet thinking about making my own though the one I talk about in my recent video didn't work for me
@TH-lb6tu8 ай бұрын
Liberty is getting lots of attention lately.
@jairoguerra992418 күн бұрын
Hey thanks for sharing this !!! Nice job Hey so where did you get those 4 one inch spacers for the first part of the video because I tried to fit my struts but the lower arms won't let me
@FunandAutomotive18 күн бұрын
Thanks try to do a 1" subframe drop first
@MacsSpecialitiesMotorsports2 ай бұрын
Did you upgrade your front brake hoses? If so where did you purchase them?
@FunandAutomotive2 ай бұрын
No they are stock
@MacsSpecialitiesMotorsports2 ай бұрын
@@FunandAutomotive Oh wow, Thanks!!
@honkling1Ай бұрын
ext mit deiner Kamera übersetzen Hello, very nice jeep. On the lift you have the upper control arm from JBA 1.5" springs and the shock absorbers from Bilstein with 2.5". I have all of that too, but the upper spring strut isn't original, right? where can I get those from? I come from Germany . I would be very happy about an answer.
@FunandAutomotiveАй бұрын
It is original
@tahirtuffaha42903 жыл бұрын
Nicely built, I'm just wondering if you faced any issues with the front axle shafts after that much lift?
@FunandAutomotive3 жыл бұрын
Thank you! and no I haven't had 1 issue
@monkeyheaders790Ай бұрын
muy buen video informativo saludos desde ECUADOR
@grimkustoms65672 жыл бұрын
Did you have to do a shifter adjustment with the 1" drop and how much more of a drop would be possible 2" possible? And have you made a parts list especially with all the changes and how much did you have to cut off the new rear springs you installed lately? How much backspacing are you running on the rims ?
@FunandAutomotive2 жыл бұрын
4.3 back spacing no shifter adjustment needed 2 inches shouldn't need a shifter adjustment according to the guy that has done one 2" should be do able the parts list is in the description in the video talking about the lift I have all the parts there except the rear springs from the jku could not find stock jku springs online for some reason and I cut 1" off of the springs for proper fitment
@lvalle19946 ай бұрын
Correct me if I’m wrong but that upper control arm looks like it going to hit the spring if you go, so the angels don’t have any down travel?
@FunandAutomotive6 ай бұрын
No not much down travel when the UCA contacts the spring which doesn't take much
@lvalle19946 ай бұрын
@@FunandAutomotive I just read the comment that I left lol. Glad you were able to make sense of what I was trying to say.
@CyberPunk-ow3gi2 ай бұрын
you still getting tire rub in the back when flexing the suspension or do you not go to places that bad? every video I've seen with the 2.5 lift and 31s it rubs in the rear.
@FunandAutomotive2 ай бұрын
The only rub its ever done in the rear end was rubbing against the fender flares and even that was very little
@CyberPunk-ow3gi2 ай бұрын
@@FunandAutomotive your jeep looks really good on 33s dude
@FunandAutomotive2 ай бұрын
@@CyberPunk-ow3gi thank you!
@vincenzocarlucci39923 жыл бұрын
Bellissima bellissima bellissima Jeep liberty
@FunandAutomotive3 жыл бұрын
Mille Grazie
@Jdmforall3 жыл бұрын
Great video!
@FunandAutomotive3 жыл бұрын
Thanks man!
@jamesa9lpiopatton4197 ай бұрын
Looks cool
@MochiMotoPa3 жыл бұрын
idk if I have asked before but do you plan on changing your exhaust at all? and are you planning on adding a locker for better 4x4 action? in your recent videos it would stop so close to the top of the hill maybe a good locker would be good.
@FunandAutomotive3 жыл бұрын
I might keep my stock exhaust and I will be putting a locker soon 👍
@mcguireskaratetheartofsurv1942 Жыл бұрын
Thanks
@castis66844 күн бұрын
Did you change the drive shaft
@FunandAutomotive4 күн бұрын
No I didn't
@jonask87972 жыл бұрын
Hey, I wanna do something like this because I love how it looks, how much should something like this set you back if you want to do it right and good quality?
@FunandAutomotive2 жыл бұрын
About 1,500
@jonask87972 жыл бұрын
@@FunandAutomotive Alright sweet, thank you!
@FunandAutomotive2 жыл бұрын
No problem 👍
@ryandrobnick13133 жыл бұрын
How’s it going boss, love your setup! Quick question though, do you think I could fit 265/75r16’s on my Liberty with a 3 inch Rough Country lift after hammering down the pinch weld in my front fenders? Thank you!
@FunandAutomotive3 жыл бұрын
Thank you! And yes I had 265 75 16s on a 2 1/2 inch lift so a 3inch would be even better 👍
@ryandrobnick13133 жыл бұрын
Sounds good! Thank you for the quick reply!👍🏻
@FunandAutomotive3 жыл бұрын
Not a problem and You're welcome 👍
@ryandrobnick13133 жыл бұрын
Another question brother, sorry to bother you, I forgot to add that the Rough Country lift leveled the front with the rear, do you think all would still be good with the 265/75r16s?
@FunandAutomotive3 жыл бұрын
Hey man it's no problem. Yes that should be just fine for the 265s
@challinorg3 жыл бұрын
Just a quick question, I noticed you’ve you bolted the ball joint below the upper control arm instead of positioning it from the top as it’s supposed to be. What was you reason for that?
@FunandAutomotive3 жыл бұрын
To bring the control arms up higher from the springs
@FunandAutomotive3 жыл бұрын
@Jake Liberty yes I have still so Im Getting some adaptor extensions made custom for my ball joints
@oliverdenoyer6 ай бұрын
Alright 3 years later, how did it pan out? What problems did you run into if any?
@FunandAutomotive6 ай бұрын
No problems what so ever
@oliverdenoyer6 ай бұрын
@@FunandAutomotive do you daily drive it?
@FunandAutomotive6 ай бұрын
I used to until I sold it then ended up buying it back yes actually 1 problem was an 02 wire was rubing and grounding on the frame but that was my fault easy fix
@aeguzman693 жыл бұрын
Hi, How did you get the front 5" lift with just the springs? This spring will only lift 2.5". Did you also add spacer at the top of the springs?
@FunandAutomotive3 жыл бұрын
I've got 2.5" adjustable shocks and 1.5" OME lift springs and 1" custom spacers in the front
@haydynochoa9804 Жыл бұрын
@@FunandAutomotive how much did the whole lift setup cost?
@FunandAutomotive Жыл бұрын
About 450 to 500 somewhere around that price 👍
@juancardenas20804 ай бұрын
What if I told ya you could get 2 more inches of lift out of those shocks😂
@mytravelguide30283 жыл бұрын
Can you tell me about the 265/75/16 tyrest on 2,5" lift. How was the ride and how much of a rub u've got ?
@FunandAutomotive3 жыл бұрын
It was a good fit slight rub at full lock but nothing serious
@berniebennett72172 жыл бұрын
Did you use the one inch spacer all around front and back on the subframe and how is the ride on your CV shafts any wear how's the ride
@FunandAutomotive2 жыл бұрын
Yes 1" all the way around and the cv's are just fine haven't had any problems ever since the lift and drop has been done
@berniebennett72172 жыл бұрын
@@FunandAutomotive thanks for the info I have a 3 inch right now gonna ad the other 2
@FunandAutomotive2 жыл бұрын
No problem
@HDP5013 жыл бұрын
Also, did you get a part machined for the upper control arm ball joint?
@FunandAutomotive3 жыл бұрын
As of right now I didn't but next month I should be able to get one made I've been very busy the past few weeks so I haven't had the time.
@Isuzu_Paul3 ай бұрын
Those cv joints must hate you lol. Did you ever rehear since you went up...roughly 4 tires sizes or roughly 20% more rotating surface?
@FunandAutomotive3 ай бұрын
No I didn't regear didn't need to
@robertjanowski7103 жыл бұрын
What have you done for rear drive line angle? I'm at 5 on the back and am looking at getting rear adjustable lowers along with the iron rock wj upper. Also at 4 in the front I flipped my ball joint on my jba to give more clearance against the spring. But I have ran out of camber adjustment. Looking at opening up the camber slots to gain som more.
@FunandAutomotive3 жыл бұрын
I haven't done anything the driveine angle is just how I left it after lift and I did the jba ball joint flip as well. So you're saying the wj upper control arm will fit kj?? And where do I get adjustable lowers been looking for some time now 4 some
@robertjanowski7103 жыл бұрын
It will but a custom diff bracket will need to be made. There are some guys on out there that make and sale them. There is one on our FB page that does. "The Jeep KJ.". Iron Rock sales a kit that includes the upper and lower adjustable arms for the wj. They look like they should work. Ill be ordering the kit just before spring.
@FunandAutomotive3 жыл бұрын
Nice thank you for the Info let me know how it all works out 👍
@FunandAutomotive3 жыл бұрын
@Jake Liberty thank you!!
@pat14lang3 жыл бұрын
@Jake Liberty CB-Engineering has a lot of bad reviews from what I have found. Currently no longer have the fox coil-overs listed on his website. I would contact SPOHN Performance and see what they can do. I just had a custom made adjustable track bar by them and was a helluva lot cheaper than the JBA adjustable track bar (2011 Nitro/Liberty)
@dwightstebner23452 жыл бұрын
on the JBA UCA, is it possible to mount the ball joint on the bottom?
@FunandAutomotive2 жыл бұрын
Yes it's possible
@mcguireskaratetheartofsurv1942 Жыл бұрын
Nice
@Gokywildcats1111 ай бұрын
What do you think it cost to do the lift
@FunandAutomotive11 ай бұрын
About $600
@dwightstebner23452 жыл бұрын
would it be possible to mount the ball juoint on thje bottom of the control arm?
@armenian6000 Жыл бұрын
can you please update the ebay links as they dont exist anymore
@FunandAutomotive Жыл бұрын
Yes I'll update the links as soon as possible 👍
@pat14lang3 жыл бұрын
How’s the steering with the subframe drop and suspension angles?
@FunandAutomotive3 жыл бұрын
It's excellent just as it was when stock
@dseeling17192 жыл бұрын
I am having an issues with the ride. It feels like there is no give. I hit a pot hole and it goes bang. Will the Bilstien shocks improve that part of the ride?
@FunandAutomotive2 жыл бұрын
Yes it should improve with some new Bilsteins shocks
@dseeling17192 жыл бұрын
I have issues with ride. I have to replace front axels because of pinging/weird noise when in four wheel drive. I want to get everything right this time. My Liberty looks like the rear is higher then front not level like yours. I am trying to figure out where turning noise is coming from. I have greased JBA upper control arms, noise is still there a sound like un-grease ball joint ( err err err sound). When I did the lift (2.5 spacer kit) I replace lower ball joints and struts from Autozone. The only thing I did not replace was the tie rods and sway bar links. When I replace axels I what to make sure this is the last time. I want your suggestion on what parts I need to replace. I plan to go with Bilstein 5100 all around. Where did you get springs for the shocks? What ever advise you can give me Thanks
@FunandAutomotive2 жыл бұрын
On one of my videos I have the links in the description for my shocks and springs and everything you can get the links from from my videos about the suspension and yes I do recommend the bills to 5100s very great shocks I'm still riding on them now and they're running strong and as for the tie rods I would recommend replacing them along side the end links and for the sounds the ball joint is making I'm not sure I would disconnect the upper ball joint and move it around with your hand and then make sure you greased it enough until you see grease bloating the boot up and for the axle just replace it should be the last time you do for a very long time
@TurlosGarage3 жыл бұрын
Thanks for the info. Great video. Did you figure out the upper control arm spacer/adapter?
@FunandAutomotive3 жыл бұрын
Thank you! And no not yet next month I'll be having them made 👍
@MohamedMahmoud-tq8wx2 жыл бұрын
any idea why the passenger side rides a little higher than the driver side? because i think i might have that problem too
@FunandAutomotive2 жыл бұрын
No I'm not sure exactly it was never in an accident either it was even like that when it was stock
@kennethricher45 Жыл бұрын
Is the ball joint on the upper control arm seated all the way
@FunandAutomotive Жыл бұрын
Yes
@HDP5013 жыл бұрын
I bought the same spring compressor.... it arrived bent and the foot pump stopped working after the first use...
@FunandAutomotive3 жыл бұрын
Wow you should return it they have different ones as well for sale and mine stopped working after the first use but when I used it about two three more times it broke in and it started working perfectly.
@repn73483 жыл бұрын
Curious how your boomerang in the back was to re connect after both spacers in the back. I’m rocking one spacer and it was a hoot getting the main ball joint on boomerang back.
@FunandAutomotive3 жыл бұрын
It was simple I had to do it like 3 or 4 times in a row just use a long bar to pry down on top of it then use a hammer on the edge to tap it into place
@repn73483 жыл бұрын
@@FunandAutomotive how’s the tension on the whole boomerang with the 5in in back? Just with 2.5 it’s pretty tight on the back 2 ball joints. Just actually did that sub frame drop to mine. Thanks for the great video to highlight that little liberty tip. Leveled my front right out almost.
@FunandAutomotive3 жыл бұрын
Excellent and thank you! 👍 Also the rear is only at 4.5 inches of lift right now but the boomerangs tension is just fine still
@anthonyx1873 жыл бұрын
hey man do i need new upper control arms if i plan on just lifting it 2.5 inches?
@FunandAutomotive3 жыл бұрын
When I did my two and a half inch lift it put my front camber out so I had to get the jba upper control arms to straighten it but other people don't have that problem so if you don't have that problem you will not need anything 👍
@anthonyx1873 жыл бұрын
@@FunandAutomotive thanks for the fast reply and knowledge
@FunandAutomotive3 жыл бұрын
Not a problem.
@hadtomer3 жыл бұрын
hello there. cool videos of a very underrated jeep. you can see my lib on my channel- 4 inch lift and twin lockers. i was wondering- what is that extension on your front shocks? between the lower spring isolator and the fork? it is silver coloured.
@FunandAutomotive3 жыл бұрын
Thank you! And From what I know it's just the shocks that's silver I don't have any extensions
@justincraddock24213 жыл бұрын
Where did you get your skid plate in the front?
@FunandAutomotive3 жыл бұрын
It came with the jeep
@justincraddock24213 жыл бұрын
Thanks! KO2's are amazing. I don't want to go as big as yours with mine, but I will have a 2.5" so I can go a tad bigger with the tires.
@FunandAutomotive3 жыл бұрын
Yes they are nice tires also 2.5" of lift is an excellent choice 👍
@edsonkidwell25223 жыл бұрын
Sweet ride where are you and how rough of trails to you take it on
@FunandAutomotive3 жыл бұрын
Location Arizona and mild trails nothing to serious
@janwas29623 жыл бұрын
What's the distance between the middle of the rim and the bushwacker?
@FunandAutomotive3 жыл бұрын
Ill have to get back to you on that one
@lilperez993 жыл бұрын
What kind of rims are those
@FunandAutomotive3 жыл бұрын
Ion alloy 171
@KIDGAMER4DAWIN3 жыл бұрын
bro you should invest in a diff drop save you money and cvs from breaking
@FunandAutomotive3 жыл бұрын
Well that's why I did a subframe drop 👍
@KIDGAMER4DAWIN3 жыл бұрын
@@FunandAutomotive ahh ok i missed that part 😂
@vladimirmanchame23502 жыл бұрын
did you have to upgrade the rear ratio for those tires?
@FunandAutomotive2 жыл бұрын
No I didn't
@erix9563 жыл бұрын
What's the backspacing on the wheels?
@FunandAutomotive3 жыл бұрын
4.3
@dgdsn3 жыл бұрын
Hey man! awesome car! Could you please advise what front shocks I can use for 5 inch lift? I can't find anywhere Bilstein - it's out of stock...do you know any replacement? The worst thing here - I'm in Russia and we don't have anything for KJ at all. I tried to find the same on Ebay, but failed. Thx in advance!
@FunandAutomotive3 жыл бұрын
Im sorry at the moment i cant find any in stock but i will keep an eye out for you when I find them in stock somewhere I will post the link here 👍
@dgdsn3 жыл бұрын
@@FunandAutomotive thx a lot!
@Therian._.Forever._xoxo Жыл бұрын
Thx
@Heisemberg0003 жыл бұрын
Tex a lot man ...I’m from italy ..for me is very difficult get this stuff. Could you help me With some info about other lifts in internet? Tanx again
@FunandAutomotive3 жыл бұрын
No problem do you use ebay?
@Heisemberg0003 жыл бұрын
@@FunandAutomotive yep
@FunandAutomotive3 жыл бұрын
I'm asking around who ships out of the US and if they answer yes I'll send you the link to order the lift and suspension
@Heisemberg0003 жыл бұрын
@@FunandAutomotive tnx my friend I really appreciate
@FunandAutomotive3 жыл бұрын
Not a problem
@downrangepursuit37992 жыл бұрын
What about the rear control arm??
@FunandAutomotive2 жыл бұрын
What about it?
@downrangepursuit37992 жыл бұрын
@@FunandAutomotive did you remove it, or keep it there?
@FunandAutomotive2 жыл бұрын
I still have the stock one installed
@user-oh1fz6zs2k5 ай бұрын
👍👍👍🤝🤟
@Blake643 жыл бұрын
This can’t ride good at all, everything is maxed out to a breaking point, control arm literally touching the strut on the slightest bumps
@FunandAutomotive3 жыл бұрын
It actually rides great just slight control arm contact on really rough bumps not on the slightest bumps