Jeep Wrangler JK Geometry - Front Suspension and Steering Explained Complete Guide Walk Through

Рет қаралды 38,834

5 жыл бұрын

This video shows you a Jeep Wrangler JK Geometry - Front Suspension and Steering Explained Complete Guide Walk Through. I show you each steering and suspension component, what they do and what problems they might have. If you've ever wondered what all the suspension and steering components of your Jeep JK are and what they do, this guide and walk through is for you!
Here's the different components covered and their timeline in case you want to skip straight to them:
Tie Rod - 0:49 amzn.to/2RzP5Oy
Drag Link - 3:24 amzn.to/2tm2VMm
Sector Shaft - 6:30 amzn.to/2R7doUE
Track Bar - 7:50 amzn.to/2G48x0d
Sway Bar Links - 10:45 amzn.to/30zoeWA
Sway Bar - 11:00 amzn.to/3apLxGX
Control Arms - 12:15 amzn.to/2R2XdI2
I hope you found this guide useful and if you have give it a quick thumbs up!
► SUPPORT THE CHANNEL - Hit the thumbs up, leave a comment and SUBSCRIBE :)
► Buy me a beer 🍺 bit.ly/videoshowmehowbeer
Be sure to leave a comment in the comments section, share with anyone you think might find this useful, subscribe for more video's just like this one!
MUSIC:
►Joakim - www.soundcloud.com/joakim
***************************
A bit about VideoShowMeHow
***************************
►Where did this start?
I really enjoy tinkering with different projects - they usually require a whole bunch of research and learning along the way. It's satisfying on doing a thing and standing back and going 'Yeah! Totally did that!'. I had a bunch of mates asking 'how did you know how to do that?' and 'I couldn't never do that myself' so I thought; I need to start something where I can help others that might be thinking the same thing :)
►What will you find here?
The purpose is simply to make these videos as top quality and helpful as I can. They will always be free, there's ZERO agenda and the only motive is to try and upload what I would want to watch to help with that particular project. I'm also keen to keep building this little community and will try to answer all questions when asked - fire away :)
New videos are being uploaded regularly so if there's something you'd like to see, have Questions and/or Comments drop me a line.
Cheers guys.
Adam
***************************
For business enquiries email - videoshowmehow@gmail.com
#jeepjksteering #videoshowmehow #jeepjksuspension
Disclaimer:
If you click any of the product links above and end up purchasing anything I get paid a small commission (not charged to you). This is one of the ways you can support the channel :)
VideoShowMeHow assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not VideoShowMeHow. VideoShowMeHow cannot guarantee against improper use or unauthorised modifications of this information.

Пікірлер: 116

@GoldenK9Campers 8 ай бұрын

Wow.. i'm a wannabe new jepp owner. So helpful to understand these components.

@mlampcov Жыл бұрын

I'm watching this video and wondering why all this stuff is backwards....then did the math...Aussie accent...everything is backwards...RIGHT HAND DRIVE....GREAT VIDEO! An idiot like me understood it all!

@tonyaelliott2368 3 жыл бұрын

I've had my JK for 5 years, and I've been a regular off-roader, but never really took the time to understand all the components. This was GREAT! Thank you for helping me understand it in a way that no one else has been able to before.

@VideoShowMeHow 3 жыл бұрын

Welcome!

@Gzus 4 жыл бұрын

I love the stick with the pointer hand on it! This video was *VERY* helpful for a Jeep-n00b like myself. Thank you so much for taking the time to record, edit, and upload this to YT!

@VideoShowMeHow 4 жыл бұрын

Welcome! Glad it was helpful 👍

@tonyamitchell7922 2 жыл бұрын

Right me too!!!!!

@Donnut123 2 жыл бұрын

Man, I learned this stuff through trial and error. This is an awesome video! I'm going to recommend this to anyone who is wondering about Jeep steering or DW.

@VideoShowMeHow 2 жыл бұрын

Thank you mate 👍

@michaelutley 4 жыл бұрын

What an outstanding video!!!! I've been to every off road store near me and I cannot get any of my questions answered. This answered most of my questions, thank you so much!

@VideoShowMeHow 4 жыл бұрын

Thanks for the comments, glad you found it helpful! 👍😁

@ENERO33 3 жыл бұрын

BEST VIDEO EVER....! NO ONE EXPLAINS IT LIKE YOU. THANK YOU

@VideoShowMeHow 3 жыл бұрын

Thanks mate glad it was helpful!

@randybecker7339 Жыл бұрын

Excellent explanation! I now know what all those things are there for!

@koolaid5684 2 жыл бұрын

This is awesome!! Just what i was looking for!

@Patriotalliance Жыл бұрын

Very helpful information, thanks!

@Paul-og8oy 3 жыл бұрын

The pointer is cool. Thanks for this video. Super helpful. Love from India

@trapperkeeper6202 4 ай бұрын

Great explanation!

@arielgs 3 жыл бұрын

Great video!!! Well explained, in detail, simple to understand and very teaching!! Thanks Professor!

@VideoShowMeHow 3 жыл бұрын

Glad it was helpful!

@sk1ppman 4 жыл бұрын

Cheers from America. Thanks for this! You explained everything you'd need to know about a front suspension in an easy to follow way. The pointer finger was the best!

@VideoShowMeHow 4 жыл бұрын

Thanks! Glad you found helpful 😁

@miguelbahamonde6321 Жыл бұрын

Great video!!

@tarundhawan9138 2 жыл бұрын

Beautifuly explained bro.... 👍🏻👍🏻👍🏻

@GT4JB 5 жыл бұрын

Love it! making it understandable for us novice wheelers

@VideoShowMeHow 5 жыл бұрын

Welcome 👍

@blackscornersmotorsport7231 5 жыл бұрын

Great video!! Very well done!

@VideoShowMeHow 5 жыл бұрын

Cheers! 👍

@pinballer875 5 жыл бұрын

perfect video chock full of information. Thank you

@VideoShowMeHow 5 жыл бұрын

Thanks mate! Glad you found it useful :) Make sure you subscribe :)

@timmytonks8980 3 жыл бұрын

Thanks for the video! Exactly what I needed to know.

@VideoShowMeHow 3 жыл бұрын

Welcome!

@jkwarehouse8758 5 жыл бұрын

Very nice walk through.

@VideoShowMeHow 5 жыл бұрын

Thanks :) Feel free to subscribe if you'd like to support!

@Whiteandsonsgarage 5 жыл бұрын

Awesome video mate, love the little finger

@VideoShowMeHow 5 жыл бұрын

Haha thanks mate :) More vids coming

@mikylahall6009 2 жыл бұрын

Damn good video dude

@josesarmy 4 жыл бұрын

I wish I saw this video sooner This was a great video thanks 👌🏼👌🏼

@VideoShowMeHow 4 жыл бұрын

Thanks mate :) Remember to hit the ole share button :)

@michael9678727 5 жыл бұрын

Good video

@fatandugly0000 5 жыл бұрын

Great video mate, absolutely perfect and so much useful information

@VideoShowMeHow 5 жыл бұрын

Thanks mate, hit the ole subscribe button got a bunch more on the way :)

@fatandugly0000 5 жыл бұрын

@@VideoShowMeHow Looking forward to it!

@voidvoid5235 4 жыл бұрын

The little finger! It made my day, thanks! also thanks for all the information, I was getting mad about spending so much on the sector shaft brace, waiting for it to arrive, but thanks to your video. I am actually looking forward to installing it.

@VideoShowMeHow 4 жыл бұрын

Have fun!!

@VideoShowMeHow 4 жыл бұрын

Also checkout the install vid on the sector shaft brace if you'd like while you wait for yours to turn up :) kzfaq.info/get/bejne/lb-VfpR5uKquhY0.html

@marki-p5065 3 жыл бұрын

Great video.....

@VideoShowMeHow 3 жыл бұрын

Thanks!

@fouellet1701 3 жыл бұрын

Very informative. Would be nice to see the parts in motion.

@kimspears6941 Жыл бұрын

Thanks!

@VideoShowMeHow Жыл бұрын

Thank you 🙏

@meganbuchanan4478 5 жыл бұрын

Great video very helpful! Can you do a video on rear suspension as well? I have a lot of play in my rear suspension would like a little info..

@VideoShowMeHow 5 жыл бұрын

Sure can, watch this space :)

@meganbuchanan4478 5 жыл бұрын

@@VideoShowMeHow what space?

@VideoShowMeHow 5 жыл бұрын

As in, check back soon for when the video is uploaded to the channel (or better yet hit the subscribe and bell buttons so it notifies you 😊)

@gurjotsandhu8016 3 жыл бұрын

Hello boss, I recently bought Jeep JL 2018, 78000 kms on it. It has 33’ tires, 2.5 inch skyjack lift kit. It makes clunk sound on slow big bumps mostly on the turns.My Drag link was having little play I have change it but still it makes the same sound. Technicians had taken a look on it but he was unable to find any thing.there’s nothing loose even. What can u suggest. Thnks

@matthewstansel2628 3 жыл бұрын

Thank you! Terrific video, great information! I thought I heard you say your JK is a turbo diesel?!! Is that true? I want that!! Are they available in the US? Thanks, Matt

@VideoShowMeHow 3 жыл бұрын

Thanks 👋 Yep have CRD Turbo Diesel Wrangler. They're not available in the US unfortunately :( In Europe they even got Rubicon versions!

@anibalbabilonia1867 3 жыл бұрын

Dude you got a wooden arm?!👋😂just kidding! Great video!👌😎👍

@VideoShowMeHow 3 жыл бұрын

😁😂

@recreation_outdoors 3 жыл бұрын

How high of a lift do you have and what tire size do you run? Great video as well! Very informative. Just purchased a JKU this was definitely informative!

@VideoShowMeHow 3 жыл бұрын

Cheers. Was 3" teraflex outback springs and 33" ATs in that vid. Is a bit different now 😁 Full walk around vid will be live shortly on the channel if you're interested ✌️

@recreation_outdoors 3 жыл бұрын

@@VideoShowMeHow I'm thinking of getting a 2.5" lift from AEV. So is it still recommended to upgrade those suspension components mentioned in your video?

@VideoShowMeHow 3 жыл бұрын

@@recreation_outdoors no you should be ok. For anything 3"+ you'll need most of those components ideally. I'd do the lift and see how it drives. Can always upgrade other bits later. If you're running bigger tyres (eg 35s +) def recommend the steering shaft brace

@recreation_outdoors 3 жыл бұрын

@@VideoShowMeHow thanks for taking the time and advice! Cheers!

@SalonSonikPasadena 4 жыл бұрын

Wow I just subscribed great channel thank you for this video I have a 2015 JK Wrangler and I'm having steering wandering issue as you drive the Jeep wonders. Any clue what could be the issue? Thank you

@VideoShowMeHow 4 жыл бұрын

Thanks mate! It's normally castor it's out.. have you just done a lift?

@SalonSonikPasadena 4 жыл бұрын

@@VideoShowMeHow No I've had the lift for a while now, it's a 3.5" rock Krawler lift with mid arms , coils springs and fox shocks on 37", Currie Antirock Front and rear Sway Bar Kits on a 2015 JKU. everything was OK until i completed going through Rubicon trail, i made it through just fine but as I was driving back down from lake Tahoe on pavement I noticed steering wandering like the jeep is drunk driving.

@VideoShowMeHow 4 жыл бұрын

Yeah nice man I will get over to the Rubicon Trail one day... on the bucket list! With your setup (pretty sweet btw) I would be checking for damage/wear from the trail, checkout your links/bushings/ball joints. I'd also check your steering box for slop/play. Running 37s and hitting that big of a trail would have worked it out for sure. Thought about running a steering brace? Got a vid on the install on the channel.. they're cheap and it made a really noticeable difference in how tight steering felt when I installed it on my rig.

@SalonSonikPasadena 4 жыл бұрын

@@VideoShowMeHow ok, will do

@SalonSonikPasadena 4 жыл бұрын

@@VideoShowMeHow can you share link to that video please

@richardseitz5235 Жыл бұрын

When replacing the factory track bar with an aftermarket one like the Synergy track bar is keeping the weight of the vehicle on the tires required?

@VideoShowMeHow Жыл бұрын

@mrderek800 4 жыл бұрын

@Video Show Me How, I have al ready purchased a aftermarket drag link and tie rod since I was told that they needed to be replaced. But what else should I look into? Since when I am going down the highway @70mph the steering for the Jeep needs constant correction to stay in the middle of the lane. What would you recommend that I should pick up for aftermarket part replacement since it is an 07. Additionally, should I worry about replacing the rear ball joints or trackbar? Thanks 🤙.

@VideoShowMeHow 4 жыл бұрын

Hi, no ball joints on the rear just the front, I'd start there to make sure there's no play. If your steering is wandering, there's a good chance your caster is off, have you lifted the jeep? If you have you will need more positive caster to make it steer like factory again. Things like caster correction brackets or adjustable front upper and lower control arms will help with this. Lots of good info online :) 🤟

@rogerevartt9749 5 жыл бұрын

Very informative. What size tires are you running?

@VideoShowMeHow 5 жыл бұрын

33"s round town and 35"s for trips. Haven't tackled gearing yet so when I do I'll prob ditch the 33s :)

@rogerevartt9749 5 жыл бұрын

Video Show Me How thanks. I have 33’s. They seem to grab every groove in the road. It gets tiresome on long trips. I bought it already lifted with a 2-3” lift. Wish I’d paid more attention. From what I’m seeing I have a bump steer problem maybe more.

@VideoShowMeHow 5 жыл бұрын

Sounds like it mate, easy check is to see how parallel your various bars are (track bar, drag link etc). If they're at too much of an angle it could cause bump steer. May need to look at getting some correction brackets

@rogerevartt9749 5 жыл бұрын

Video Show Me How I’ll check it out. Thanks.

@VideoShowMeHow 5 жыл бұрын

Good luck 👍

@joncruz 2 жыл бұрын

Excellent! What’s the correct caster angle for jk 3” lift?

@VideoShowMeHow 2 жыл бұрын

Should be aiming for 4.5-6 degrees, wayalife has a greater article on this

@joncruz 2 жыл бұрын

@@VideoShowMeHow Thank you so much, do you have the link of this article?

@VideoShowMeHow 2 жыл бұрын

@@joncruz just Google wayalife caster - he's got lots of great info on Wranglers

@joncruz 2 жыл бұрын

@@VideoShowMeHow What about the rear caster angle?

@VideoShowMeHow 2 жыл бұрын

@@joncruz not really an issue (no steering). Adjustment would only be for correcting significant coil bend

@JoseOrtiz_1416 4 жыл бұрын

So when i lift my jeep 2.5 inches, should i unbolt the Track bar? Or can i leave it on? I did my dads this week leveling kit and did not unbolt the trackbar, just wondering if i should be and why

@VideoShowMeHow 4 жыл бұрын

It's usually recommended to remove trackbar bolt and loosen control arm bolts when doing a lift. Then when everything is in and jeep back on the ground retorque everything. This is so you don't put extra stress/binding on your bushings etc.

@JoseOrtiz_1416 4 жыл бұрын

@@VideoShowMeHow awesome , will do that then ! Thanks !!

@user-qi4cs4xl5o 2 ай бұрын

What is the name for that part what say FOX underneath jeep

@VideoShowMeHow 2 ай бұрын

That's a steering damper, the pass through one

@briangall5124 3 жыл бұрын

I'm a little confused. Can you give me some advice. I have a 2013 JKU. I had some bump steer issues. I've put on an adjustable track bar, a RC track bar bracket at the axle and a yeti hd drag link flip. I have a RC 3.5" lift with the drop pitman arm. My bump steer feels worse now. If I were to go to stock pitman, wouldn't the drag link and track bar then be out of parallel?? When I go over big bumps my Jeep feels like the back end goes on a different direction than the front end. My steering wheel definitely had bump steer when hitting any bump. Any help would be appreciated!!

@VideoShowMeHow 3 жыл бұрын

Hey Brian, hmm sounds like you've gotost covered. I'd delete the Pitman drop bracket, never been a fan of those things for a bunch of reasons and see how it drives then. Are all the bushings and links themselves sound? Ball joints good?

@briangall5124 3 жыл бұрын

@@VideoShowMeHow okay thanks I'm going to go to the stock at Menards and see how it goes. I was in an accident they replaced the frame with a new frame, and put on a used axle from which I had all new ball joints put on. I don't know if there's anything else wrong with the axle as far as u-joints or anything

@briangall5124 3 жыл бұрын

That was supposed to say stock pitman arm, not Menards. Lol

@VideoShowMeHow 3 жыл бұрын

Wow ok well that changes things if it was in an accident and they charged the frame, that's a big job could be lots of things. Can you take it back to who did the job of recent?

@briangall5124 3 жыл бұрын

@@VideoShowMeHow yes I'm taking it there right now hoping they can do something about it

@ralphgonzalez4947 5 жыл бұрын

What's that piece that holds the knuckle called??

@VideoShowMeHow 5 жыл бұрын

The steering knuckles are held in place by top and bottom ball joints. Is that what you mean?

@ralphgonzalez4947 5 жыл бұрын

the piece or part that holds the ball joints???

@VideoShowMeHow 5 жыл бұрын

The knuckle is the part, the ball joints go in it and then they at attach it to the diff housing. Here's a pic teraflex.com/shop_items/jk-high-steer-knuckle-kit