Jet Powered Go-Kart (Top Speed Run)

Рет қаралды 748,306

Күн бұрын

I Built another Jet Go-kart just to see what the Top Speed of the single Engine Jet-powered Go-kart is.
In the previous jet go-kart video I did everything except for a top-speed run, so here it is, I thought it was kind of weak because I was expecting a lot more but the wind resistance is much stronger than You think it would be.
I am editing this video after a Brain injury I sustained recently, so I'm not seeing things exactly the same way I used to right now, I hope this video is edited well lol.
let me know what you think and wish me luck on posting more videos! these are pretty difficult sometimes.
Chapters
00:00 Intro
00:18 Building Jet Go-Kart
00:58 Rebuilding Jet Junk Go-Kart
02:11 Testing at 1st Track
05:52 End of 1st Test Run
07:00 Top Speed Test Location
07:48 Top Speed Run
08:41 End of Top Speed Run
Instagram: / warped.perception
Facebook: / warpperception
IMDB: www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and check out my other videos, Thanks!
By: Matt Mikka

Пікірлер: 725

@dapz 8 ай бұрын

I was wondering about the top speed when i watched that original vid. Tbh i thought it would be a bit faster, i was able to get to 41mph on my own jet kart with a smaller engine and it was still accelerating, but i got sketched out.

@WarpedPerception 8 ай бұрын

Yeah I think I remember that, I also thought it would have been much faster like over 80 mph. But it was definitely on the balance point and the wind resistance was definitely doing its thing. I think with some more aerodynamics it would have probably done 70 or 75, but honestly if I want to go faster I'll just put more engines hahaha.

@pitbullw2350 8 ай бұрын

I saw a guy who was trying to break the world speed record with a RC car having to do a bunch of things similar to what would hold back the speed from air drag That dudes problem was tires, it’s prob a combination of road type and tires 40 mph with a jet engine is pretty sketchy, idk how the dude did 60 mph in one, I bet a pothole or bump is a nightmare

@jeronimoayala4757 8 ай бұрын

@@WarpedPerception how much would it cost to build one of this i love to own one ? Would you guys build one sell it ? I would be interested in buying it

@LordSlag 8 ай бұрын

@@WarpedPerception Please tell us the name of the awesome song playing at @1:00 !!!!!!!!!!!!

@matejzahajsky 7 ай бұрын

@@WarpedPerception Aerodynamics are for people who can't build engines.

@Roboseal2 8 ай бұрын

This man is the definition of; If it drives, put a jet engine on it. Rad.

@natsterjam 7 ай бұрын

Colin Furze mate!

@CriticoolHit 8 ай бұрын

I know you do stuff differently but I gladly would have watched 5 individual 25 minute long episodes of you building this thing.

@WarpedPerception 8 ай бұрын

Thank you, I think about that every so often, but to be realistic I have a lot of videos to make, I'm so backlogged. I'm just trying to get on it now.

@kaboom362 8 ай бұрын

Sick Matt.. I just showed my son your channel. It's probably the best channel he's ever seen. 😊

@jcims 8 ай бұрын

@@WarpedPerception here’s another one for the backlog, completely unrelated to this. I haven’t found a single video on the Internet that shows the output side of a turbo when it’s being run by exhaust of an engine. Like how much air is coming out, and what happens when you start to constrain it with a nozzle? is it a leaf blower? Is it an air compressor, what’s going on there?

@thusarakapalliyeguru7655 6 ай бұрын

@@jcimsThere is a video called "Actual working model of turbo charger" I think it's similar to what your looking for, not exactly but pretty close :)

@aimless9137 5 ай бұрын

I have something to build and wonder if that engine and electrics are for sale somewhere that you could share the link?

@fpstina 8 ай бұрын

this channel always amazes me at the effort this dude puts into his projects... always 10/10

@mojo3008 8 ай бұрын

@@DontReadMyProfilePicture.57 is this some kind of Russian nesting doll thing?

@feelincrispy7053 8 ай бұрын

Yeah 100%, the amount detail in every little thing he does is crazy. So many other build channels are sketchy as hell and just try to hide it with editing

@htownblue11 8 ай бұрын

Many people cannot appreciate what this man builds in his garage. Amazing stuff as always WP! And 50 plus mph is a cart is far faster than most can conceive. That’s smoking.

@WarpedPerception 8 ай бұрын

Thanks, personally I thought it was going to go faster I thought I was going to get to at least 80. But that wind force is killer!

@WarpedPerception 8 ай бұрын

Thanks! You know what's up. Tbh the disease is very painful at times, making things work well is hard, making things work great is very difficult most times.

@rian0xFFF 8 ай бұрын

@@WarpedPerceptionwhat if you try adding some aerodynamics body to it

@michaelyoung1020 8 ай бұрын

We run over 50mph with predator engines on small dirt tracks. Clones are 60+

@debbieroth2627 8 ай бұрын

U should make me one

@waitemc 8 ай бұрын

As always, above and beyond what we deserve in a vid. Thanks man

@WarpedPerception 8 ай бұрын

😊

@superskullmaster 8 ай бұрын

That drag behind the go-cart is also robbing the engine of ram recovery pressure. You need ducts that take the free stream air and direct it to the intake.

@WarpedPerception 8 ай бұрын

Well these engines don't benefit from RAM recovery at all, if they don't get enough air, they stall

@bhess1212 8 ай бұрын

@@WarpedPerception Now water injection? That may help! Might not be enough compression for that though

@BlueRice 7 ай бұрын

i thought it would be sick if adds body panel that shape like a jet with the intake of F35 up infront to channel it to the jet engine. i wonder if it faster like that

@WarpedPerception 7 ай бұрын

@@BlueRice that's exactly what I was thinking for the next build. I don't know how much it would help performance but it would look cool for sure.

@tjmorgan700 10 күн бұрын

I was like wtf with the intake behind the seat..

@HeisenbergFam 8 ай бұрын

Bro casually came out of nowhere after 2 months as usual

@WarpedPerception 8 ай бұрын

I know it's been tough, I was pretty much on schedule last year around this time but then I did a few projects with Mr Beast, I just finished those up in June, then I had to set up all my machines for all of the videos moving forward, then I had a brain injury a few weeks ago. But I'm recovering and back to making videos now. All I really want is a consistent upload schedule but these projects are extremely difficult and my life is insane.

@BiggMo 8 ай бұрын

Praying for your recovery…. Glad your staying engaged with you passions. Take care

@WarpedPerception 8 ай бұрын

Thanks.... I'm just glad I'm here and I'm still functional, brain injuries are no joke, like nothing I've ever experienced before super bizarre.

@HangryGiant 8 ай бұрын

@WarpedPerception damn bro glad you're doing better, I know it's none of my business, but you know what they say curiosity killed the cat, do you mind elaborating a bit on why your injury happend? Did you fall and hit your head or crash or something like that? I really like your channel and can't wait to see future uploads :)

@TobiasKornmayer 8 ай бұрын

Nice build! Absolutely nice seeing you build the right stuff the right way! Thanks bro!

@WarpedPerception 8 ай бұрын

Thank you... You know the details are tough!

@TheLaser373 8 ай бұрын

Great, as always, I really appreciate your detailed works!

@gloknor 7 ай бұрын

Amazing and really cool kart! I can't wait to see whats next .Thanks for posting this .

@trevon4423 8 ай бұрын

Felt like i have been waiting for this video for years now. Lol went to sleep a few time wondering what the top speed was going to be. I fully appreciate thr work you put into this and all you videos.

@WarpedPerception 8 ай бұрын

I know, I'm always super late because I got a million things going on, but recently I sort of become more focused so hopefully I can keep some momentum on some videos here. Thanks!!

@Gyppor 8 ай бұрын

These are great, I think you could get more content out of a lot of these builds if you did build videos. I know they take time, but there is so much involved in these and I'm sure we all want to see more!

@ProducerGio 8 ай бұрын

Absolutely amazing! The fabrication, the upholstery, everything diy. I want to be like you when I grow up lol.

@alraybaca6235 8 ай бұрын

Good to see you back

@piuthemagicman 8 ай бұрын

Love your projects! Very underrated, been following you for years. Greetings from far away Finland in Europe, keep it up! 💪😎👌

@systemuser8701 8 ай бұрын

It's interesting how you layed out the dawg as a blast shield !!!🐕

@BlueRice 7 ай бұрын

this man put passion into it without knowing it. add finishing to the chair, wheel balancing and paint the chassis. this is quality workmanship just for a project that he do for youtube

@joellowery 6 ай бұрын

How much does a jet engines cost?

@echobeefpv8530 8 ай бұрын

That was crazy cool !! If you added aerodynamics of any sort, I'm sure you could increase the top end, but not by much. Not sure I would want to go much faster, without some crash protection, pads, etc., as any failure at these speeds would probably equal a hospital trip. Just a very cool project, all in all, and well done !!

@WarpedPerception 8 ай бұрын

Yeah exactly, I completely agree.

@CryoToast 8 ай бұрын

If he added some aero it could be a fighter jet.

@JustBadly 8 ай бұрын

Now he's at 50mph the jet behind the seat will start to suffer reduced intake due to a low pressure region forming.

@yuvix 7 ай бұрын

To be fair, I think there could've been a noticeable difference even if he had just tucked down.

@WarpedPerception 7 ай бұрын

@@yuvix I agree, but My solution would just be add more engines lol

@MohammadHamad 7 ай бұрын

Man this is such a nice video! So much progress and perfectly created with no drag or delay to make the video longer! PERFECT!

@WarpedPerception 7 ай бұрын

Thanks I appreciate that, sometimes I wonder whether I should make the videos longer and more dragged out .

@pedromatajr8725 8 ай бұрын

This is awesome! Next level content for sure.

@WarpedPerception 8 ай бұрын

Thank you

@ejcrashed 8 ай бұрын

Ohh man, yes!, your stuff is allways top notch!

@boeing777pilot5 7 ай бұрын

These videos are always amazing to watch! Do you think that one day you would make a tutorial video/explaining the process of what you do to make these jet engines? I think it would be awesome to see the process.

@Bemboo765 8 ай бұрын

This man brings anything he thinks of to life

@diyelectricbiker9361 8 ай бұрын

That thing as a Hybrid would be even more awesome.. Amazing work.

@christopher.m.estelow 8 ай бұрын

That was awesome!! I would love to see you add some aerodynamic additions/changes to see how much faster you can get it to go. I'm guessing if you can get the seat to lay back some, that alone could easily get it over 70. Great job and keep up the great work!!

@ryan49805 8 ай бұрын

I love this channel!!! Wish you much success bro!!! 🔥💯🔥

@WarpedPerception 8 ай бұрын

Thanks!! It's been really rough

@joshuagibson2520 8 ай бұрын

Been missing your content, Matt. ALWAYS good shit. Keep em coming. Please.

@WarpedPerception 8 ай бұрын

Thanks, I've been really tied up for the last year working on Mr Beast project, but as of July I'm back on my stuff, A few weeks ago I got sidetracked with an injury but I'm recovering now...it was insanely painful.

@OmarDelawar 7 ай бұрын

Need to do a twin jet setup next! Can’t wait to see the top speed on that!

@spencer9190 7 ай бұрын

Dude you are seriously talented and skilled. Blows my mind how much you know how to do

@JoaoZagoSJC 6 ай бұрын

Craziest but amazing to see. Great work dude.

@KenjiThe1st 8 ай бұрын

I'm just glad that you're back, bro. Awesome content as usual, keep it up! Get well soon.

@WarpedPerception 8 ай бұрын

Thanks, I'm getting a little better everyday, my vision and brain function were the biggest hurdles

@quicksilverguy21 7 ай бұрын

Can’t wait for 3 jets! Nice work!

@travis.napier 8 ай бұрын

Yes! Finally. So glad to see you back in the swing of content, keep this momentum please!

@WarpedPerception 8 ай бұрын

Thanks I'm trying, it's been so tough, between doing and Mr Beast projects for months on end, and trying to get my stuff together, and then recently getting injured... Always something but I'm definitely going to try to keep momentum here, I love making videos.

@travis.napier 8 ай бұрын

@@WarpedPerception I'm sure that Mr. Beast project was much more involved than it appears from how we see it through a screen. We know you love making videos! You've got this.

@WarpedPerception 8 ай бұрын

@@travis.napier well I worked on at least 5 Mr Beast projects so yeah That's what it took so long. Not sure which one you saw.

@travis.napier 7 ай бұрын

@@WarpedPerception Oh man, I'll have to look more then. I only saw the one jumping the school buses.

@My-Pal-Hal 7 ай бұрын

HEY,.. HE DIDN'T SIGNAL HIS TURNS ! ! ! ... shots fired, shots fired 😳

@markhavlicsek910 7 ай бұрын

Cool video, I enjoyed that. I've always wanted to explore the possibilities of those small jet engines, and what better way to do it than with a go cart.

@Shadobanned4life 7 ай бұрын

Amazing ! Great work.

@CarLoverPhotography 8 ай бұрын

That looks like a blast

@ltaldoraine7305 8 ай бұрын

Can't wait to see more jets added to this unit

@waltervetri2476 6 ай бұрын

Brilliant ,and the bonus you even explain the thrust drag stuff so simply Great video . Vetri South Africa 🙏🇿🇦🙏

@Deeveeaar 8 ай бұрын

What a great build! That seems like alot of fun to drive, nice engineering =)

@WarpedPerception 8 ай бұрын

Thanks Man! To be honest I really didn't want to do this video, I wanted to go way more extreme, but I had to do it because I was curious and so was everyone else I guess. But the next couple GoKart videos are insane lol. I just don't think I'm going to be able to ride them because I recently had a brain injury.

@BiggMo 8 ай бұрын

@@WarpedPerceptionyour fans appreciate having this for comparison before the next generation. Great video… Sorry to hear about the injury… I pray that it’s fully recoverable.

@Deeveeaar 8 ай бұрын

So sorry to hear about your brain injury, hope you recover quickly! Can't wait to see what is next in store mate!@@WarpedPerception

@johnhutchison9782 8 ай бұрын

@@WarpedPerceptionwasn't courtesy of one of your projects, was it? You do some outstanding things on this channel. 🤘best wishes on a speedy recovery. Peace, John

@MrSeekaywhy 7 ай бұрын

Truly spectacular!!!

@superskullmaster 8 ай бұрын

Hope your injury isn't life changing. Keep up the good work.

@alraybaca6235 8 ай бұрын

What happens did I miss something 🤔

@superskullmaster 8 ай бұрын

@@alraybaca6235 read the notes/description

@WarpedPerception 8 ай бұрын

How did you know about my injury?

@WarpedPerception 8 ай бұрын

I recently had a brain injury, it's been an extremely insanely painful last couple of weeks... When I was in the ER I had a full dose of fentanyl and the pain was still there, But I'm currently recovering and I'm doing pretty good.

@superskullmaster 8 ай бұрын

@@WarpedPerception you put in in the description

@MaNNeRz91 8 ай бұрын

Chinese cheap tyres will be a completely different compound of rubber. Harder. Longer to heat up. More difficult to keep the heat etc

@WarpedPerception 8 ай бұрын

I found that out the Hard way lbvs lol.

@MaNNeRz91 8 ай бұрын

@@WarpedPerception me too except I was in my 1985 mini in the rain 😂😂😂😂 I always buy a certain hankook tyre nowadays because of it 😅😅

@ctdieselnut 6 ай бұрын

Man, you do great work. A lot of very different skills. I was impressed just by the wrapping of the steering wheel lol. Some would make a video just of that, for you, its just a 5 second time lapse shot (which is cool too). I can appreciate the time it takes to make custom stuff like that. Let alone the one off cnc parts, anodizing, building/programming electronics, etc.. Happy i found this channel. You could probably make a separate channel just for 'behind the scenes' from leftover footage that gets cut/glossed over during a project like this.

@Mrkiki22 8 ай бұрын

Bro killed the video again 🎉

@alohabobbylaguna1702 7 ай бұрын

A great Go Kart BUILD with a Jet engine

@benjaminkenobi21 3 ай бұрын

It sounds like a jet plane. It's actually a freaking jet! Fascinating

@adammartin4906 7 ай бұрын

Awesome so glad you did a top speed because I was wondering what its top speed was, thanks for doing the top speed!!!

@WarpedPerception 7 ай бұрын

Thanks, A lot of people ask me in the comments, and I was personally curious so it had to be done, I was supposed to have the next video out already but I had a brain injury a few weeks ago, it was hell no joke I can't even explain how intense the pain was for a week and a half straight non-stop no break, it was insane, but I'm back at it now

@u.e.u.e. 8 ай бұрын

- improve the aerodynamics with some covers over the frame and the bottom - side skirts for groundeffect - add 2 vertical parallel fins behind (each) jet engine that are controlled via cables and the steering for giving you vector-thrust in tighter turns; if you have oversteer and you need to counter-steer the vector-thrust can help you to get the rear of the go-cart back on track 😉 *Nice project!!!* 😃👍

@christophermarshall5765 8 ай бұрын

Awesome mate!! Very quick. To decrease drag, enclose the front.

@billarroo1 7 ай бұрын

I love it. Very NICE. Just watching. this was a great learning experience for me. Can't wait for the three engine model. Almost 3 times faster ? Thanks

@alexluke84 4 ай бұрын

You are a scientist, top mechanic, driver, inventor...you rock 💪😎

@cyprex 8 ай бұрын

Love the science and engineering!

@WarpedPerception 8 ай бұрын

Thank you

@mariobrnabic4252 7 ай бұрын

What a fantastic video. Love your stuff..

@WarpedPerception 7 ай бұрын

Thank you

@Aleks_Mechanics 8 ай бұрын

Notification SQUAD!!! Have a nice weekend!🔥🔥🔥

@TheRealCCSmith 7 ай бұрын

That was baddass👍made me nervous watching!

@dr.toxicgamingmadscientist 7 ай бұрын

It's guys like him that makes me want a Go-Kart myself, just to have a little something to get around on in my town and to get out and get some air every now and then.

@nathanwhite7518 7 ай бұрын

Bro, all that awesome work and no roll cage? Come on man. Still really cool, super talented.

@RobOnMotors 8 ай бұрын

I randomly searched your channel yesterday for jet engine content as a reminiscer and suddenly this has appeared. Awesome!

@WarpedPerception 8 ай бұрын

I just got back to it after almost a year of back to back Mr beast videos and then I had a head injury a couple weeks ago I'm now recovering from ☹️. I literally have like the worst luck

@RobOnMotors 8 ай бұрын

@@WarpedPerception get better soon. I'll be ready and waiting for the next jet madness!

@WarpedPerception 8 ай бұрын

@@RobOnMotors thanks.... I'm on it.

@samsgarage1716 8 ай бұрын

Great job it’s amazing.

@nathanieljames7462 8 ай бұрын

That anodizing looks SICK bro!!

@WarpedPerception 8 ай бұрын

It works so well And you can do pretty much any color you want if you do it yourself.

@nathanieljames7462 8 ай бұрын

@@WarpedPerception You're a wizard, Matt! I love it!

@Leonardokite 8 ай бұрын

Everything you build is top notch Matt. Your kids friends must be envious!

@WarpedPerception 8 ай бұрын

The little kids are always pretty cool, it's the adults I have issues with, I have people that are so mad at me for no reason at all that they don't even talk to me.. dead serious..

@Leonardokite 8 ай бұрын

@@WarpedPerception That is sad my friend. But I guess that's just how some people are nowadays. 🤷‍♀ And yeah, kids are amazing.

@robertdecrock4038 7 ай бұрын

Great work ❤

@topherwayne4398 7 ай бұрын

Awsome video!!

@jburick9123 5 ай бұрын

thats crazy that vid of the dude on the kawasaki is in my hometown🤣 never realized that till now

@user-cj8ef8gt2g 7 ай бұрын

I'm curious what the rpm came up to after the carb adjustment. By the way I want to say thanks for the hard work and time put into your unbiased reviews. Keep up the good work.

@DadsGarageDiagnosticSpecialist 7 ай бұрын

Nobody does it quite like you. Well done.

@johnathanh9369 20 күн бұрын

Cop casually drives by like a jet engine go cart is the least of his worries that day. Creative content is greatest!

@Bemboo765 8 ай бұрын

keep up the good work

@ohiosigmarizzler344 8 ай бұрын

hello its been 12 min and wow that go kart look so goood and the next time strap three jet engines to the go kart

@Adventure_fuel 7 ай бұрын

That looks so fun.

@enginediy 8 ай бұрын

Awesome

@chrisclemmer809 7 ай бұрын

Absolutely incredible work!

@themanhimself3 7 ай бұрын

He puts more love into a go kart than I do my entire car.

@AlexDeGruven 7 ай бұрын

Definitely seems like independent rear axles is the way to go with the next iteration. Complicates braking a bit, but would give a ton of maneuverability improvements.

@My-Pal-Hal 7 ай бұрын

First Time Caller 😂 But just looking at the pictures. Extending the frame just a tad. And putting the outside engines, just so they warm the tires. Yeah, make them individually throttlable. You might get a cart that has an All Weather Capability 😂 ... and Sticky in the Corners 😏 From an old school aerospace guy. That actually worked with that Science Guy. I think his name was Speed Walker 😂 ... memories 👍

@Grasshopper.80 7 ай бұрын

Hey have you considered adding some area! Sounds fantastic.

@RwingDsquad 8 ай бұрын

This plus 3 more jet engines. Let’s do it.

@augustoschreiner9847 8 ай бұрын

it's been a long time I was waiting for this new video, it looks the last one was 86 years ago

@WarpedPerception 8 ай бұрын

I definitely feels like it was 86 years ago, unfortunately I had an brain injury which was no fun but I'm recovering and I'm back making videos thank God..

@MrBen527 7 ай бұрын

Beautiful fab work! How did u cut that hub from the billet?

@kenny2644 8 ай бұрын

Love ur vids!

@WarpedPerception 8 ай бұрын

Thank you

@ashtynpenney7674 5 ай бұрын

I love how my man put a volume warning at 2:58, reminded me to turn my volume *up* lol

@bozotheclown935 7 ай бұрын

Pretty crazy setup specially with all that fuel and stuff in front of you. Just glad you didn't hurt yourself doing this. The sort of thing you should be doing at a racetrack with flame proof suits not on a back street somewhere. Anyway, good to see you survived it OK.

@danielnorman8595 7 ай бұрын

People don't realize how fast things go by when you're that close to the ground. It's a matter of perspective. It doesn't seem like you're going that fast in the jumbo jet at 30,000 feet in the air even though you're doing over 500 miles an hour. The ground is just so far away. When you're sitting literally inches above it amazing how quick it goes by. That looked like a lot of fun. Cool video

@GarageSupra 8 ай бұрын

Could be a great video series idea: make a top speed salt flats jet go cart world record

@WarpedPerception 8 ай бұрын

True but I'm sort of scared of doing any top speed anything, I mean it's cool for the books and the numbers but when accidents happen at top speed they are usually very bad.

@2HIGH59 6 ай бұрын

One bad ass video loved the sound 👍🏻

@valveman12 5 ай бұрын

That looks like so much fun!

@GlekkeMatrak 7 ай бұрын

Would the top speed change significantly if you put the jets intake in full air flow, so not right behind the vaccuum you create with your seat and body? I'm curious about what that would do to the total thrust.

@travis.napier 8 ай бұрын

Wow reading about your injury is a big deal, wishing you and your family a healthy and positive recovery.

@WarpedPerception 8 ай бұрын

Thanks, it was insanely painful for almost 2 weeks straight, I can't explain how intense and unbearable the pain was non-stop continuous. But I actually made it and I'm currently recovering, all I can tell you is a brain injury is no joke, it's really hard for me to explain how you pretty much have no control over what your brain is doing.

@travis.napier 8 ай бұрын

@@WarpedPerception I'm really sad to hear you had to deal with that and it's effecting you so heavily. If you can find the will to turn it into a positive experience and grow from it, I'm rooting for that. Hang in there brother.

@QuintonNG2000 8 ай бұрын

Wow! I think a duct into the jets intake to take advantage of ram air at higher speeds would really help the peak thrust and top speed. Right now the jets intake is in a vaccum region which is fighting performance

@WarpedPerception 8 ай бұрын

That's what u would think but these are turbo jets, They don't pull in as much air as you would expect, most of the power from these engines comes from the fuel, If they don't get enough air they stall, that's pretty much it. I do however wonder if an air intake would increase the efficiency. See because no matter what these engines are RPM based, they're going to dump fuel until they reach the target RPM or stall in the case of not getting enough air. I'm definitely going to experiment with that

@insAneTunA 8 ай бұрын

It is pretty cool 👍

@OVERKILL_PINBALL 8 ай бұрын

Your knowledge and skills are next level

@WarpedPerception 8 ай бұрын

Thank you

@blk77sunshn 6 ай бұрын

That was very impressive ! I was not expecting that level of speed and performance from only one of those engines. That jet engine packs a punch with out a doubt ! At those speeds with that amount of fuel sloshing around not to mention a smoking hot jet engine, you might want to get a nomex suit or the likes. Just my 2 cents.

@travis.napier 8 ай бұрын

Alright, so more ideas getting explored here: Arguably the largest wond resistance is always going to be the person in the seat, maybe create a clear hood structure of some kind to reduce the drag? Or for shear numbers game create an entirely remote version with cameras installed in case you lose line of sight somehow.