Building a Slash Exhaust for my Street Scrambler

Рет қаралды 12,640

9 ай бұрын

✩ Patreon - / jishtl
✩ Instagram - / jish_tl
Any questions regarding how i did this comment below!
In this video, I build a very simple yet effective slash cut exhaust for my Triumph Steet Scrambler 900. I keep it super low profile with the addition of Catalytic Converters and Silencers built in! I won't lie, they didnt do a fat lot with the noise reduction.... BUT it has the option to improve upon it if required. Exhaust baffle matting and metal ties will do just that. For me this exhaust is actually spot on. Cruising it has a nice pitch that doesn't resonate with you, and those little throttle blips and crackles just you feel all kinds of awesome!
Links to the parts in this video -
Exhaust Header - ebay.us/c04wZS
Cat Inserts - www.aliexpress.com/item/10050...
Links to items i use :
Insta360 Action Cam!:
store.insta360.com/Motorcycle...
MY CAMERA - SONY A7iii:
ebay.us/XNzOXP
MY LENSES -
50mm 1.8 Lens:
ebay.us/JCMi6Q
35mm 1.4 Lens:
ebay.us/7XEBNs
18mm 2.8 Lens:
ebay.us/LdpD8e
DJI Ronin S:
ebay.us/foIV0N
Rode Wireless Go :
ebay.us/KL4LSK
Zoom H1 Audio Recorder :
ebay.us/qxz3wk
MOTORCYCLE CLOTHING -
Helmet :
www.Ruroc.com
Jacket:
pandomoto.com/?ref=13
Jeans:
pandomoto.com/?ref=13
Gloves:
www.goldtop.co.uk
Boots
:ebay.us/2b1i28
#triumph #bikebuild #Jish

Пікірлер: 77

@BrickHouseBuilds 9 ай бұрын

Duuuude that's perfection! Those finished shots are 🥵🥵🥵 Killer video!

@jishh 9 ай бұрын

Let's make some shots like this with your bikes dude!

@WolfyFam 8 ай бұрын

Looks so much better and sounds great

@AceCafeBikes 9 ай бұрын

Amazing work - looks and sounds great!

@jishh 9 ай бұрын

Appreciate it dude! See you soon!

@AndreiLucaa 5 ай бұрын

Brilliant video mate! Well done

@steveobrien7125 9 ай бұрын

Looks good mate, well done on the work.

@AndrwH91 9 ай бұрын

Awesome watching this, and remembering watching you build the CB125 on a crate in your home. Good Job Jish👌Looks Fire!!🔥

@jishh 9 ай бұрын

haha! things have come on a little bit since then! always humbling to see the beginnings as I had no idea then, what I would be doing now

@jonathanlalas1977 9 ай бұрын

As usual amazing video! Keep it up man

@jishh 9 ай бұрын

Thanks buddy!

@tomstc 9 ай бұрын

Great design and build sounds awesome

@jishh 9 ай бұрын

Thank you my dude!

@PincheALsGarage 9 ай бұрын

Great stuff! Currently building a 2023 Hunter 350 as a scrambler

@user-ge5jz6nw5e 8 ай бұрын

Amazing technic and talent🎉 You are sickkkk🎉 最高にかっこいい！

@porkscratchings5428 6 ай бұрын

That’s really great. I’m looking at a new exhaust for my scrambler with a bit of a meatier sound. Good job and it sounds fab 👍👍

@jdub750 9 ай бұрын

Nice work 🙌

@jishh 9 ай бұрын

Big up

@ricardosanchez-kk4tp 9 ай бұрын

Look and sound really good💥💥💥💥

@jishh 9 ай бұрын

Thanks man!

@MrCornhole98 9 ай бұрын

Very nice!!

@jishh 9 ай бұрын

Thanks!

@peterenwick6098 9 ай бұрын

Great video Jish. I’m hoping to do something similar with my CB400T

@jishh 9 ай бұрын

Do it man!

@Moztreet 8 ай бұрын

Nice, I would love to make one myself.

@jishh 8 ай бұрын

Go for it dude! a little time learning welding and you can make all sorts of things!

@Scrambler_47 Ай бұрын

looks amazing. take one minute and check what i did in my scrambler exhaust.

@paulcomerford6754 9 ай бұрын

🔥🔥🔥

@bradsoole 9 ай бұрын

Awesome job jish. I reckon if you fiber glass wrapped the baffle it would chock the power.

@jishh 9 ай бұрын

You might be right my dude. I plan on having a play around with it to see if I can find the sweet spot

@Sholly97 3 ай бұрын

Hey! Love it - do you have a working link for the de-cat exhaust headers and how have you found them?

@mshazong6311 9 ай бұрын

Love from Assam

@jishh 9 ай бұрын

love u 2 x

@ducaveli 9 ай бұрын

Brudda what an awesome video. I went the other way with mine…loud as poss! what’s the DB app cos I’m curious now

@jishh 9 ай бұрын

Literally called DB Meter 😂 and thank you dude 🙏

@nvrmind3142 17 күн бұрын

What are you welding with? Looks like a tig head, but I don't see you feeding any rod?

@paulshackleton3594 9 ай бұрын

Would love to see you chop the rear frame with a new loop and light and better bench seat :)

@jishh 9 ай бұрын

These are future plans for sure

@hansottevanger4112 4 ай бұрын

How would it sound if you if you used that header (which would delete the cat) with the std mufflers would it still be to quiet or give a throat sound ?😊

@shawnbyrne234 9 ай бұрын

Great video .. How do you get on with headlight as in vision at night ..

@jishh 9 ай бұрын

Thanks! I wont lie, I haven't ridden it in the dark yet. This winter ill find out

@exceedkrkc3071 4 ай бұрын

Looks amazing mate A question regarding the insulation behind the pipe. Is there any heat protection for the parts that are behind the pipe or there is no heat protection needed for those parts? I’m just wondering if the paint and stuff are going burn and melt Thinking of doing something similar on the new Scrambler 400 X

@jishh 4 ай бұрын

Its a plastic unpainted part and its held up totally fine :)

@exceedkrkc3071 4 ай бұрын

thanks@@jishh

@casparguo7300 4 ай бұрын

Niceeeeee🎉🎉🎉 what size of material you use！

@tomek860 9 ай бұрын

Great work👍 sorry for noob question but you seem not to use filler Rods? I am learning some basics of TIG welding and it just cought my eye

@jishh 8 ай бұрын

I used the “ fusion weld” method where you make sure the faces are a flush fit and used filler where needed. Some may say this isnt the correct method but I believe the best method is the one you are capable of. Im not very good at filler welding but i did what i can 😁 Hope this helps! Good luck with your welding journey 🤘

@tomek860 8 ай бұрын

@@jishh thanks :) my welding journey has only started, it is not east, but I am stuborn AF :)

@jishh 8 ай бұрын

@@tomek860 haha get at it man! You only learn by doing. You got this!

@arinangel_ 2 ай бұрын

When you change exhausts how do you ensure the back pressure to the engine is within tolerance?

@jishh 2 ай бұрын

I dont 😆 but the bike still performs well and sounds even better!

@kihestad 9 ай бұрын

Very cool exhaust - when it comes to the looks 👍 but it's still a bit loud to - isn't it? 🤔

@jishh 9 ай бұрын

agreed its loud, but in the right way. doing the tests indoors was a little silly of me as its just a giant echo chamber. But when out on the streets its honestly not that bad ( also read the description )

@lmaway8545 9 ай бұрын

maaate I'd love to pay for some custom pipes for my Street Twin 900 from you!

@daymoe6367 2 ай бұрын

Do you have to tune it after?

@jishh 2 ай бұрын

Nope

@whiteknightinblack 5 ай бұрын

to me, the pre-fabricated header unit, is just like using headers on a car, truck etc., most people buy those instead of making their own,, so now worries and more power to you.

@enochmartin7190 5 ай бұрын

Did you just cut the pipes?

@jishh 5 ай бұрын

Pipes were cut for sure. But i didnt just cut the pipes no. Did you watch the video? 😂

@BadHorsie2 3 ай бұрын

It is going to get a little ear fatiguing on long rides, I bet you end up putting the fiberglass in around the baffles.

@jishh 3 ай бұрын

Not at all sir! Done some good miles and its been no burden at all 👍

@BadHorsie2 3 ай бұрын

@@jishh⁠Thats good to hear, it sounded really deep rumbly in the video.

@FunWithAJ 9 ай бұрын

KZfaq notifications failing me. Subscribed to your channel with full notifications turned on and just randomly saw this 3 weeks later.

@jishh 9 ай бұрын

Always the way. I know im not posting as regular as I used to but im trying to make it about quality not quantity and I think KZfaq sees my lack of posting and bumps me down in the algorithm. Either way I hope you enjoyed the video! Currently working on a USA trip special as we speak!

@FunWithAJ 9 ай бұрын

@jishh definitely enjoyed the video. If you come out to LA when you visit the US. Coffee on me at the Bike Shed one of the days if you're up for it.

@jishh 9 ай бұрын

@@FunWithAJ sounds awesome! Ill hold you to this offer 🤘

@steveplumbob41 7 ай бұрын

If you put slash exhaust on triumph. Don't you have to remap the ecu

@jishh 7 ай бұрын

Nope

@eh74nq 9 ай бұрын

Might be worth trying a pair of DB Killers before you resort to glass fibre?

@jishh 9 ай бұрын

What kind of DB killers do you mean? Im trying to keep a clean look with nothing visible sticking out the ends 😂

@AdrianMartinez-mm5kt 9 ай бұрын

If I didn’t already get mine from British customs I’d ask you to make me some

@jishh 9 ай бұрын

What exhaust did you go for out of interest? they make some really cool style ones

@AdrianMartinez-mm5kt 9 ай бұрын

@@jishh I just did their slashcut shotgun slip ons. Kept the original cat and headers. Sounds great and no need to tune

@salummohamed5343 7 ай бұрын

can you make one for me how much?

@billesbacon 9 ай бұрын

I am planning to retrofit a Triumph Scrambler 900 so that I can deliver bacon and keep it warm using the exhaust. Let’s talk

@jishh 9 ай бұрын

That sounds crazy and I love it! bikes and bacon

@peterkoning21 5 ай бұрын

Music, music.....!!!!!