John Deere 1640 Fitting a Rear Crank Seal

Рет қаралды 29,792

Күн бұрын

In this video I fit a new rear crankshaft seal on the John Deere 1640.
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from www.queenslandtractorspares.co...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.

Пікірлер: 42

@FranciscoGO1980 Жыл бұрын

I had to do this one time, it would have been impossible without the tool. Best $300 my employer spent that year.

@BundyBearsShed Жыл бұрын

Yep you need the tool for sure.

@Tf9500 5 жыл бұрын

I don’t have many videos up but a few years ago I did a short video of using the tool to put a John Deere seal in. Your video is a lot better, I didn’t say a word when I did mine ha!

@BundyBearsShed 5 жыл бұрын

I just snuck over for a look, good stuff.

@charlesvanderwolf5751 5 жыл бұрын

Well done Lance !! You have really showed your experience in fitting that seal. Regards, Charles @ Nerimbera

@BundyBearsShed 5 жыл бұрын

Thanks Charles.

@irwinmccook7942 5 жыл бұрын

Another great video!! You can never have enough specialist tools, I have gathered up a lot of Deutz & Kramer tools over the years & they ake life so much easier!!

@BundyBearsShed 5 жыл бұрын

I agree Irwin, A little time spent making good tools is well worth it for years.

@lelandrentz755 3 жыл бұрын

Thank you for sharing your expert knowledge

@BundyBearsShed 3 жыл бұрын

My pleasure!

@charleshart6992 5 жыл бұрын

Very neat!!

@BundyBearsShed 5 жыл бұрын

Makes life easy.

@BleuJurassic 5 жыл бұрын

really cool tool there are quite a few motors that would work on guess its out to the machine shop

@BundyBearsShed 5 жыл бұрын

The tool works on a lot of John Deere products but I see Isuzu uses something similar as well.

@terryjohnston7162 8 ай бұрын

Great video. So you don’t need the protective ring with that type of seal?

@BundyBearsShed 8 ай бұрын

That is correct

@mertonflynn6227 9 ай бұрын

Bundy great video and thank you v much. Question- with a JD 6068 engine, 10000hrs, with rear main crank seal leak, engine otherwise running great, some blow by, do I need to think about engine rebuild or just do the seal??? thanks Mick ireland

@BundyBearsShed 9 ай бұрын

Do the seal first and see. If it doesnt last say 500hrs or more the engine may need work but do the cheap stuff first.

@ShainAndrews 5 жыл бұрын

Squatch does some impressive work on some real relics. How do you drop something around an open bucket and miss? I can have an open bucket 20' away drop something, and I swear it teleports itself to the bottom of the bucket.

@BundyBearsShed 5 жыл бұрын

I watch him too, interesting and a good tradesman

@luioliver1727 Жыл бұрын

Someone notes that oil seal has a direction arrow stamp in rubber, it's in Wright direction??

@BundyBearsShed Жыл бұрын

Sure is it cant really be fitted back to front with the tool JD uses. It has been a few years since the video and it doesnt leak a drop.

@AbdouMazari-q4m 3 күн бұрын

ترجة مفهمت

@davidhall4914 3 жыл бұрын

Hi Lance, catching up on older videos of yours, but I cannot find one on a grey fergie, any information would be greatly appreciated. Dave from England. ( thank you for the previous reply).

@BundyBearsShed 3 жыл бұрын

Coming soon! if you are looking for the rear crank seal

@lukaszpuma 4 жыл бұрын

hi, can you save the dimensions of this device. Greetings from Poland

@BundyBearsShed 4 жыл бұрын

I will see if I can get someone to draw it up.

@lukaszpuma 4 жыл бұрын

@@BundyBearsShed OK thank you. I have already mentioned it for the third time and it leaks every time.

@shyamsinghparihar9778 3 жыл бұрын

Any job in Australia for tractor mechanic

@BundyBearsShed 3 жыл бұрын

No Im sorry some of the big companies may have something.

@shyamsinghparihar9778 3 жыл бұрын

@@BundyBearsShed ok thanks

@dartmoordave 2 жыл бұрын

Lance, just an engineer talking. Why not have a boss on your tool to locate in the crank to ensure alignment?

@BundyBearsShed 2 жыл бұрын

Steel inner on the cassette seal so this tool it lines up well and slips over well.

@dartmoordave 2 жыл бұрын

@@BundyBearsShed I'm off to find a JD tool locally, fingers crossed.

@BundyBearsShed 2 жыл бұрын

@@dartmoordave I have drawings if you email bundybearsshed@gmail.com

@bfeca96 4 ай бұрын

@@BundyBearsShedsent a mail, can you please share the drawings of this tool?

@ManoelSantos-xu7eu 2 жыл бұрын

Que Pôôha é Essa ?

@BundyBearsShed 2 жыл бұрын

Rear crank seal.