John Deere 318 Onan Engine Differences B43G vs P218G

No video

John Deere 318 Onan Engine Differences B43G vs P218G

Рет қаралды 90,518

9 жыл бұрын

Notes some of the differences between the older B43G and the newer P218G Onan engines that were installed in the John Deere 318 Garden Tractor.

Пікірлер: 49

@sharoncole5093 6 жыл бұрын

outstanding and very informative. just bought a 318 for my son and your videos are so helpful

@mmrbeef 6 жыл бұрын

Thanks for the comments! Glad the videos are helpful and good luck with the 318.

@michaelmartinez1345 3 жыл бұрын

An excellent video!!! I now know that my engine (with no I.D. tag present) is a B43G 16hp machine.. Mine has breaker points, something that the P218's did away with... And a stock bore of 3.250" and a stroke of 2.625"... Mine has no lugs for a starter on the R/H cylinder, but it uses lugs and a starter mount plate that are attached to the oil pan assembly.... This video was a BIG help to I.D. the machine that I bought at a garage sale... Thanks again!!!

@mmrbeef 3 жыл бұрын

Congrats on picking one up at a garage sale. The couple times I have tried to do that they have always been Grade A collector prices!! Glad the video helped.

@ibrahimlionel4995 3 жыл бұрын

instaBlaster.

@mic982 6 жыл бұрын

I'm going to look at a 317 today that the seller says has the retro-fit Onan P-218. This was a very helpful video to help me determine if he's right and not the original Kohler Series I. The Kohler had bad issues with lubrication.

@mmrbeef 6 жыл бұрын

Glad it helped. Hopefully you were about to get the 317 w/ Onan. The 317's with Series II Kohlers or the Onans are workhorses.

@bbkmods 9 жыл бұрын

Another great video. You've been a great help. Thanks.

@mmrbeef 9 жыл бұрын

+William Kelley Thanks! Glad folks are getting use out of them.

@charlesmcguire5956 3 жыл бұрын

Thanks a big help ...I got one lately with a surging problem and I thought the carb needed cleaning ....

@natebyrd5107 5 ай бұрын

Glad for You

@kevinullrich1619 3 жыл бұрын

I just bought a 318 with a stuck engine. It is the B43G. It is being delivered in an hour. I’m excited. Before I know more about the engine condition I’ll go through the steps of checking the oil, removing plugs and doing short cranks (see if it was hydro-locked), and just checking out how the previous owner maintained it. I will then probably put some Marvel Mystery oil in and soak the pistons. Any additional recommendations?

@MrFledge 2 жыл бұрын

Hi. Fantastic videos of you work on the 318s and Onan engines. I've been reassembling a late 1989 318 that I received with the engine removed and mostly torn apart. Your videos of tearing down and rebuilding the Onan engine have been invaluable to me. I've only worked on the B43G engines so I have a question about the routing of the starter power cable from the starter solenoid. Is the routing in this video accurate? Thanks for all your help.

@mmrbeef 2 жыл бұрын

Thanks

@mauricehuffman9064 2 жыл бұрын

Hi mmrbeef, Just watched your video June 11, 2015 about B43G and P218G engine differences. Can you tell me where solenoid on the B43G was mounted on the JD 318. Because of repeated starter loosening resulting in ring gear damage, I change out my origin P218G oil pan to the B43-48G oil pan. Now need to figure out what kind of solenoid to purchase for the new B43-48G starter and where is the best or most convenient place to mount the solenoid. can you advise? I will appreciate any assistant you can provide. Happy 4th!!!

@gordonback3225 5 жыл бұрын

I need to know how to change a starter on a FF20 Sears Craftsman's lawn tractor with a Onan motor

@mmrbeef 5 жыл бұрын

Sorry I have no experience with how this machines a set up. I'm not much help! Sorry.

@rjecsn 2 жыл бұрын

Bought a Case 446 with an Onan B43 engine, what are some "bolt in and go" compatible engines I could use in the 446.

@gunks_getaway 7 жыл бұрын

the relay mounted on the side is a NECESSARY option for hard starting. they are known to only click when starting. this kit fixes that problem permanently.

@mmrbeef 7 жыл бұрын

Correct it is a helpful addition. However, I have also found a through cleaning of all the connections in the electrical system plus a double check of all the grounds works wonders for the poor starter performance. It would fix the problem permanently as long as there are halfway decent ground connections. The grounds always seem to be the problem on these machine for some reason.

@gunks_getaway 7 жыл бұрын

the key switch contacts do not carry enough current to hold the starting relay in after a few years. I do agree that Maintenance is important.

@HalfmoonVIP 2 жыл бұрын

Why does the crankcase need a breather? I’ve always been wondering

@corylwillrise 2 жыл бұрын

what direction do they rotate looking at the tractor from the front? CCW?

@chase5896 Жыл бұрын

I'm thinking about buying a 318 that's a 1992. Is the Onan a good engine? Also is it hard to find parts for it?

@kringle02 6 жыл бұрын

I have a 87 John Deere 318 with the p218g my problem I have is the starter mounting on the cylinder are broke . Will the pan from a b48g fit my engine and is that the one that has the starter mount on the oil pan . Thanks for any help

@mmrbeef 6 жыл бұрын

Yes, an oil pan from a B43 with the starter mount will fit on a P218. You will need to make sure you have the correct starter (the housing is a bit different) or change it over to the bendix style starter with the solenoid under the instrument panel.

@mikesautomaintenance5780 Ай бұрын

Where the hell can I get aftermarket parts for the p218g? I need a stator, rotor and ignition control module I just can't bring my self to spend over 400$ for all 3 for oem from Cummins

@mmrbeef 19 күн бұрын

About the best place to get them is used on eBay. Stators are typically cheap, ignition and rotors used to be $100 used.

@smjmike781 5 жыл бұрын

I have a Gehl 2500 Hydra Cat with a 24 hp Onan Performer engine. The engine is the P218G as depicted in your video. I resurrected this old skid loader from a farm grove. In the process, the engine has received a new coil, spark plugs, spark plug wires, filters etc. The engine starts fine (even in very cold conditions) and runs great until it reaches operating temperature. Once it fully warms up the engine bogs (cuts) out. I removed the air cleaner and observed a fuel spay inside the carburetor when the bogging takes place. A small black puff of exhaust occurs when this spray of unneeded fuel occurs. I'm curious as to why this occurs and what the fix my be. The carburetor has never been rebuilt, but it has received a new needle and float.

@matthewbrown7683 4 жыл бұрын

Is there any difference in the carburetor from the b43g ?

@mmrbeef 4 жыл бұрын

Yes, the carbs between the engines do differ. The main differences are in the Venturi (throat of the carb) and the main jet (which you cannot see without some disassembly).

@robertduncan2742 5 жыл бұрын

Is a 318 worth getting without the motor then repower it if the rest is in good shape and once done will it hold its value.

@dennishouk7943 3 жыл бұрын

yes

@alcaldwell8961 4 жыл бұрын

i have a performer 20 sxl onan with no spark turns over but when i put my spark tester on i get no spark any sugestions for me thx

@mmrbeef 4 жыл бұрын

Could be anything from a bad key switch, bad coil, or even a pick up. If you can test each component individually.

@aidenwebb9466 8 жыл бұрын

I have what I was told is a 84 318 but cereal code says p218g.

@luciendube4393 6 жыл бұрын

Aiden Webb it may be a Linamar

@jethrobodine9867 5 жыл бұрын

Lucien Dube I know the 316 changed to p218 in 1987

@dannyc7839 4 ай бұрын

I recently bought a 1988 that has the B43G. Must be a repower or something

@mmrbeef 4 ай бұрын

Yes, finding a B43G is not uncommon in newer units. The two engines are interchangeable with the units with some realistically east modifications.

@samuellemaster4360 3 жыл бұрын

Can you put a p218a in the place of p43g

@mmrbeef 3 жыл бұрын

Yes, you can use a P218 in place of a B43G. You will need the correct driveshaft and there are a couple of small wiring changes that will need to be made. Other than that, a P218 will bolt right in. To avoid the wiring changes, use your B43G oil pan and starter.

@Chasesrepairshop 6 ай бұрын

Another difference for the 2 is the price for parts. In canada, P-Series parts are easy to find Rebuild kits go for around 500 dollars. The B-Series engines have very pricey parts, as a carburetor rebuild kit costs 2000 in canada 😂😂😂

@mmrbeef 6 ай бұрын

Wow, that’s a big difference for parts. For the most part B series engines are worth less in parts than P series, but I mostly know the used parts market.

@Chasesrepairshop 6 ай бұрын

@mmrbeef yeah I don't know why. All the guys from the US seem to mark up prices because that's the only way we can get parts. The P series parts are cheaper because there's a person selling them cheap.

@harrisonfowler4461 7 жыл бұрын

Is one engine more reliable than the other?

@mmrbeef 7 жыл бұрын

They are both very reliable engines. They should go 1000-2000 hrs with only good maintenance practices. With poor maintenance they will last less than 1000 hrs.