Finally, it's done! Toss a few bucks in the hat: www.patreon.com/themadmailler PayPal to: themadmaillerATgmail
Пікірлер: 48
@SteamCrane6 жыл бұрын
Liking the angle blade. You may appreciate those snow tracks in a few more months!
@themadmailler6 жыл бұрын
I know i will! When i use my MC in the snow, the tracks occasionally get unnervingly tight and go SNAP! every so often. Even in heavy mud I can see the snow tracks working as they should, ejecting all the debris that gets stuck in there.
@rexkramer49382 жыл бұрын
@@themadmailler snow pads are good in the mud for the same reason!
@tomcander36692 жыл бұрын
It's a 6 way blade and they are street grousers, not for snow
@leviotts2207 Жыл бұрын
Any updates on the bimetallic clutches? How are they holding up? And how do they feel while using them?
@themadmailler Жыл бұрын
they feel better than the other side which is still original and slips under a heavy load! And the peace of mind is priceless.
@leviotts2207 Жыл бұрын
@@themadmailler Awesome thank you!
@73DiamondReo6 жыл бұрын
nice now finish the 310! Mine still isn't done but I got my HYHOE home today
@themadmailler6 жыл бұрын
310 is still sitting in the yard with weeds growing around it... i'm waiting to find a parts machine, since the 310 is in rougher shape than i thought.
@doughboy19666 жыл бұрын
Great repair. Nice dozer.
@themadmailler6 жыл бұрын
Thank you!
@kristinwhitt4478 Жыл бұрын
I desperately need some assistance could u be available to possibly help me
@55points6 жыл бұрын
The pay off vids are best..all that work was well done Man. Now you got something to show for it.
@themadmailler6 жыл бұрын
That's right. It's so satisfying to run now!
@edwardtomak28602 жыл бұрын
Want to know about what reverser clutch is I have a 350 1965 need to change clutch and pressure plate throughout bearing not sure
@Parents_of_Twins5 жыл бұрын
I'm going to go take a look at one of these machines that has a final drive issue in a couple days. So might be watching your videos repeatedly pretty soon.
@themadmailler5 жыл бұрын
Depending on what the issue is, you might have a good machine for a little money and work! There really isn't much going on inside those finals.
@subjectofgov5 жыл бұрын
Last camera shot; I believe something's been perching on the tracks at night.
@ernesttbass20374 жыл бұрын
I rebuilt my stering clutches with the fiber discs an they desent agrated fiber teeth rounded off fibers broke into pieses metal discs rusted presser plate rusted it only worked for about 3 monthes if u are thinking about buying that cheap after market kit for 559 off of reliable tractor parts don't waste your money im going to try bimetallic ones this time an see if thats any better oh yea adjusted those fingers on presser plate when I first put the new stering clutches in an when I took it apart those fingers was like I never touched them don't no what happened there hope this helps someone its a lot of work to get smoked im rebuilding mine right now I will comment a gain this summer when I try the bimitaleic discs
@themadmailler4 жыл бұрын
I put bimetallic in mine, purchased from steeringclutch.com. only a couple extra bucks for bimetallic, and you never have to worry about failure!
@paprika5184 жыл бұрын
What does that little lever on the floor do? The one by the left control arm.
@rw3dog6 жыл бұрын
Very nice I like the “F yeahs” lol
@snazzyusername6 жыл бұрын
Now get to work!
@themadmailler6 жыл бұрын
right on!
@antiquecannons5 жыл бұрын
Wrong track grousers on that machine
@themadmailler5 жыл бұрын
I like them! I use this machine alot in the yard, and while i lose a little bit of traction, i do nearly no damage to the grass. It was also really nice when we used this machine to grade dirt for a concrete floor to be poured. because of the loader tracks, it did very little damage to the fine leveling and grading work that we were using it for.
@antiquecannons5 жыл бұрын
themadmailler , yea but when push comes to shove......lol
@themadmailler5 жыл бұрын
@@antiquecannons In that case, i have a 350 crawler loader with dozer tracks!
@danielelliott36592 жыл бұрын
I wish I had the 3 bar pads on my dozer.alot better for finishing . .
@rummysworld75315 жыл бұрын
we have a 350-B crawler loader that the left side doesn't work either, is the clutch/brake assembly like you did the only reason for that? There is zero tension on the left lever for 95% of the time, occasionally it will work a little when it gets warmed up. I am new to this machine and thought maybe it is the valve part under the seat.
@themadmailler5 жыл бұрын
even if your power steering cylinders are non operational you should be able to manually operate the steering clutches. first try adjusting your clutches and brakes.
@chrisdalton91203 жыл бұрын
On my jd450 the right clutch drive was replaced but it’s very tight and when I’m pushing hard it will stop turning until I ease up on the pressure? Any idea?
@themadmailler3 жыл бұрын
try adjusting it, also on my 350 loader, the hydraulic valves leak oil, which ends up in the clutch housing and makes the right side slip. maybe that's your problem too?
@chrisdalton91203 жыл бұрын
Would I adjust it out or in ? I have a tech manual coming but it’s not here yet
@chrisdalton91203 жыл бұрын
Also I haven’t found any leaks but I haven’t opened it up yet
@scottsterling84165 жыл бұрын
Have you ever worked on the hydraulic pump on the front?
@themadmailler5 жыл бұрын
I have not.
@scottsterling84164 жыл бұрын
@@themadmailler Mine is a cessna model I had it off for a leak and then noticed my right hand angle cylinder had a bent shaft witch cause me to rebuild it. I've only had this dozer for 4weeks and still chasing down hydraulic leaks this winter will be steering clutches and track tensioners and sprockets. keep up the good work
@wvrockcrusher6 жыл бұрын
Nice!! Now, take it out and shove Franko's rusty Ferds around and out of the holes that he finds them in.
@themadmailler6 жыл бұрын
We could have used it for the Lincoln!
@wvrockcrusher6 жыл бұрын
I don't think the Lincoln could have taken much pushing without falling apart!
@themadmailler6 жыл бұрын
honestly, i'm suprised that the winch didn't rip it in two!
@Parents_of_Twins5 жыл бұрын
Are your tracks a little loose on this machine? Not that familiar with the JD's but I know that on a Case that are supposed to be tighter than that.
@themadmailler5 жыл бұрын
There is supposed to be two inches of sag between the center top idler and the sprocket. If it's too tight it will prematurely wear everything, also also not have enough give if a rock or something gets stuck in the sprocket.
@timloos004 жыл бұрын
Hey man, I've got some photo's and video's of a 350b engine installed in our boat. I've also got some questions about the oil and fuel systems. Is there anyway I can get in touch with you?
@themadmailler4 жыл бұрын
I haven't had any experience with the oil or fuel systems in these. My best advice would be to buy a manual! good luck!