John Deere X320 How To Remove & Sharpen Blades Lawn Mower Deck Maintenance Greasing

Рет қаралды 15,820

Күн бұрын

John Deere X320 How To Sharpen Blades Sharping Mower Deck Blades with Angle Grinder 4"
Link to how to Remove Mower Deck John Deere X320. • John Deere X320 how to...
Step by Step How to remove the mower deck blades, step by step how to sharpen mower deck blades. I also show you how to clean the bottom of the mower deck How to clean the top of the deck and inspect the belts. How to grease mower deck and front wheels. Mine was made in 2008 and is 12 years old. It has been running very wheel and this is my annual Preventive maintenance. I also show how to reinstall the John Deere Mower Deck. I also show a grease gun holder that prevents a mess.
22HP Kawasaki 675cc 2-cyl gasoline
Select X300 Series Walk Around Review
X300, X320, X340
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
#johndeere #mowing
Link to how to Remove Mower Deck John Deere X320. • John Deere X320 how to...
Please help support my channel by using my Amazon STOREFRONT
My Amazon STOREFRONT: www.amazon.com/shop/justadadv...
You can see all the Products I recommend in one place. I purchase all my own products and I am not supported by any company. This will help me with the cost of doing my reviews. THANK YOU SO MUCH FOR YOUR SUPPORT!!!
As an Amazon Associate I earn from qualifying purchases. Disclaimer- This video is not sponsored. I use affiliate links. As a customer, you do not pay any more or less because of an affiliated link. A percentage of the sale will go to me who generated the link. Thank you for your support of my channel! These are Commissions earned ads
Follow me on: KZfaq: / @justadad
Instagram / justadadvideosyoutube
TikTok @justadadvideos
Email me at: justadadvideos@gmail.com

Пікірлер: 21

@geterdone4888 3 ай бұрын

Use the flapper disc if you sharpen them often they do a great job couple quick swipes and they are sharp. Also maybe try a grease gun with a needle end and stick it into the plastic deck wheels to lube them up if there is a big enough gap! Cheers I just bought a x320

@josephvitale7086 2 жыл бұрын

Very good video, I would go crazy trying to do this stuff so I call my brother-in-law who is so good at fixing things and happily pay him for his time and skills. I enjoy watching videos like this because one day I just might surprise myself and try it.

@JustADad 2 жыл бұрын

You can do it!!!!

@geterdone4888 3 ай бұрын

Have a look there should be grease zerks right on the back side of the wheel also they are kind of hid and there should be one right in the middle of the front axle where it pivots at the frame! Cheers

@johndavis7394 2 жыл бұрын

Thank you so much for educating me on sharpening blades on my john deere

@JustADad 2 жыл бұрын

Glad to help!!

@1986yamahafazer69 3 жыл бұрын

Thanks for taking the time to do the video. Just picked up a used one with no manual. 👍🏻

@JustADad 3 жыл бұрын

Glad it helped. Thanks for watching!!!

@jameslester3861 2 жыл бұрын

The way those decks are designed, they accumulate grass, twigs and dirt very quickly. About the only thing a guy can do is blow out or wash the deck after each use. I have a S240 that does the same thing and my neighbor has a 320. He has bent the deck on his $$$$$ and it leaves an annoying strip when mowing. I had to take off the deck a couple years ago to replace the belt, KZfaq videos made it easy.

@JustADad 2 жыл бұрын

Thanks for Watching and sharing!!

@shlyhy864 2 ай бұрын

Those scalper wheels are not supposed to be touching the ground all the time. They should only touch when the mower might scalp on uneven ground.

@veritasvincit2251 Жыл бұрын

Thanks Dad!

@andydutot9417 2 жыл бұрын

Excellent video...the manual sucks, wish I had watched this video before I tried to sharpen my blades

@JustADad 2 жыл бұрын

Your so welcome!!!!

@ciphercode2298 6 ай бұрын

Have you still got this mower? I'm lookin at an older one that my local dealer has that was a trade in. It's got about a 1k hours on it. It seems to run fine and it seems to of been maintained well,aside from someone gettin a little to happy with the john deere green touch up spray paint. They didn't tape around any of the plastic when they were doin it and it looks like a child did it.

@charlescousar8329 2 жыл бұрын

My X300 48" is very similar to your X320 that I watched you sharpen blades on. It looks like all the deflectors on the underside of your deck have been removed. One of my deflectors, right rear, has been bent so badly on one end that it is cutting a groove in the turf. Can I just remove it and forget it? Looks like it is being held on by just one bolt. I do use the power flow attachment for bagging.

@JustADad 2 жыл бұрын

I am just not sure, I had no Idea I had deflectors. I bought this used and that is how I got it. Sorry

@charlescousar8329 2 жыл бұрын

@@JustADad I got the deck off, with the help of your video. I think now it will be easy to remove the deflector and bend it back into shape, or replace it if necessary.