How to start and operate a Troy-Bilt 2660 snow thrower. www.Johnsonssmallengines.com for questions and business inquiries please use contact page on my web site.
Пікірлер: 18
@moeAziz Жыл бұрын
Second time you helped me out with the same video. I had a very long electrical starting cord that I was using but it was not starting the blower. Watched your video again and your comment about the importance of having a shorter cord helped me resolve the issue. Thanks!
@JohnsonsSmallEngines Жыл бұрын
Glad I could help again! Thank you for watching and the kind comment. Please give this video a like and tell your friends to help the channel grow.
@gupta6013 жыл бұрын
Excellent explanation. So easy to follow instructions. Good job. I now feel more confident using my snowblower for the first time. Thanks.
@JohnsonsSmallEngines3 жыл бұрын
You’ll be an expert in no time! Thanks for watching:)
@debragalardi5121 Жыл бұрын
Excellent video! Very informative, clear, and well done!!! Thank you for helping us with our new troy built snowblower. 😊
@seesaw72892 жыл бұрын
Thanks! I really appreciate your showing me how to start and run my new machine! I'll check your video again a day prior to the next snowfall! Very helpful!
@JohnsonsSmallEngines2 жыл бұрын
Thank you and thanks for the kind comment. I’m glad it was helpful
@funkbeatz53033 жыл бұрын
Great Step by Step 👍🏽
@bryantomasortiz1933 жыл бұрын
I agree keep up the good stuff.. for first time user a lot of good information thanks
@JohnsonsSmallEngines3 жыл бұрын
Glad it helped you!
@richieedwards41333 жыл бұрын
Very informational
@JohnsonsSmallEngines3 жыл бұрын
I’m glad it helped you!
@davidtuwei5848 Жыл бұрын
The video has very helpful info. I have Troy Bilt Storm 2410 blower. It starts OK but engine goes off when I press the auger to start blowing. Any ideas what is going on?
@JohnsonsSmallEngines Жыл бұрын
Sounds like something may be stuck. Augers may not be turning due to a possible object caught between the augers and housing. I would check to make sure all of your components on the auger side are spinning freely.
@jamessnow84472 жыл бұрын
Man one question, I have a push walk behind leaf blower and I can raise and lower the front of the machine using the small hand crank on the blower that brings unit closer to the ground. My question is can you raise and lower newer snowblowers? Other than that you did a fantastic job on coaching, this is my first snowblower and I only got to use it once last season we got about 4 to 5 inches in Enfield Connecticut the date is 1/7/22 we got snow last night and my blower won't start,a friend came over and stated the carburetor is gunked up,probably from dirty gasoline. I took out my spark plug and it was wet like about up to 2 threads from the bottom do I need a new plug?
@JohnsonsSmallEngines2 жыл бұрын
Try a new spark plug and flush old gas from the carburetor if you can and tank if needed. It sounds like you may need a carburetor rebuild from fuel going bad in the carburetor.
@pinkisforpimps Жыл бұрын
When can I change the gears? Can I only do it while the snow blower is moving? Or should I stop the snowblower and then change gears?
@JohnsonsSmallEngines Жыл бұрын
You should be able to change gears while your moving but in my opinion, it is much easier to shift when not moving.