Jon Boat Front Deck ALUMINUM FRAMING Part 2 {Jon Boat to Bass Boat Conversion} Lowe 1448 Jon Boat

Рет қаралды 51,835

4 жыл бұрын

Full Jon boat conversion playlist below in case you've missed previous videos. The Front deck is finally done guys. Watch as I share tips, tricks and mistakes made while doing my jon boat mods. Aluminum framing is the way to go. It keeps the boat light and gives you the ability to customize everything. In this video I share one of the biggest learning moments of the build that can affect your health. Enjoy the video. Thanks for watching.
FULL Jon Boat Conversion Playlist: • Jon Boat Conversion
Tap that like button and subscribe to our channel to stay up to date for future videos
Music Credit Late June - Swing by Around 7pm
Check us out on Instagram: / bass_brothers_fishing
RYOBI Jig Saw (524): amzn.to/2VDErct
Foam used in My Boat: www.homedepot.com/p/Owens-Cor...
Arrow One Hand Rivet Gun: amzn.to/2xuOPtE
Harbor Freight Rivet Gun: www.harborfreight.com/swivel-...
Rivets Aluminum 1/8-Inch 100-Pack: amzn.to/2L7lg8Q
4-1/2 in. 4.3 Amp Angle Grinder: amzn.to/2UJDhup
DEWALT Cutting Wheel, General Purpose Metal Cutting, 4-1/2-Inch, 5-Pack: amzn.to/2JqJvdn
Empire Level E2994 7-Inch High Definition Rafter Square: amzn.to/2JlcBLr
Empire Level e1190 16-Inch by 24-Inch Professional Framing Square, Blue or Black Anodized Aluminum: amzn.to/2vXsZhY
Ratcheting Bar Clamp 6 inch: www.harborfreight.com/6-in-ra...
Affiliate links help to support the channel. You won't see a difference and it's the same products. Thanks for supporting our channel.
Michael Lopez TBNation: / @tinyboatnation
Anthony Jones: / @anthonyjonesbrigadeboats
FireAnt: / @fireantfishing
SMD Fishing: / @gtx10
SBFishingTV: / @sbfishing
#jonboat #jonboatconversion #bassbrothersfishingdmv

Пікірлер: 108

@jeremyreber661 3 жыл бұрын

Great videos man. I like how easy they are to listen to. No ego, no bs just plain this is how I'm doin it. I really appreciate that.

@BassBrothersFishingDMV 3 жыл бұрын

Thanks for the feedback. Appreciate it. Happy Holidays!!!

@DrDanTDC Жыл бұрын

I appreciate you making these videos. I plan on doing the same to my boat in a few weeks.

@BassBrothersFishingDMV Жыл бұрын

Awesome

@MrShankspony Жыл бұрын

Great work brother! Thank you for sharing your efforts and wisdom!

@BassBrothersFishingDMV Жыл бұрын

No problem. Thanks for watching.

@kadesavant3689 4 жыл бұрын

Awesome job!!! Love your content. Can’t wait for the next video

@BassBrothersFishingDMV 4 жыл бұрын

Thanks Kade. Appreciate the support!!! 👍🏾💯🎣🐟

@supertry-hard7711 3 жыл бұрын

Extremely helpful video, thanks!!!!!

@robertaltomari2260 Жыл бұрын

You honestly do a great job explaining the whys to what your doing.

@BassBrothersFishingDMV Жыл бұрын

Thanks.

@bowbailey69 Жыл бұрын

What a great video.

@doomgrim7 3 жыл бұрын

I watch your videos many times its going to help me out so much. I hope you catch some big ole Bass. NWG out

@BassBrothersFishingDMV 3 жыл бұрын

Thanks man. I hope so too 🤙🏾👍🏾

@Funkyluv Жыл бұрын

Bass Brother, keep up the great work and videos. Salute 🫡🎣

@BassBrothersFishingDMV Жыл бұрын

Thanks

@xero3965 4 жыл бұрын

Great work! Looking good

@BassBrothersFishingDMV 4 жыл бұрын

Thanks.

@tugikecil679 3 жыл бұрын

Shout out to you because I am now doing my boat with aluminum frames in mind (already bought the frames)

@BassBrothersFishingDMV 3 жыл бұрын

Sweet!! Good luck and have fun. 😃👍🏾🤙🏾

@jbull1317 3 жыл бұрын

Good stuff love these vids

@BassBrothersFishingDMV 3 жыл бұрын

Thanks

@MDLandandProperty Жыл бұрын

Great build sir!

@BassBrothersFishingDMV Жыл бұрын

Thanks

@tymason3056 3 жыл бұрын

Dope video

@electronpusher604 3 жыл бұрын

Thanks man I love your vids

@BassBrothersFishingDMV 3 жыл бұрын

Thanks. I appreciate you watching and giving feedback. 👍🏾🤙🏾

@walterjones3819 3 жыл бұрын

Nice job it looks very good.👍

@BassBrothersFishingDMV 3 жыл бұрын

Thanks. 👍🏾🤙🏾

@jslagelstube 3 жыл бұрын

Very nice work!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks

@adamtate8268 3 жыл бұрын

I am very impressed.

@BassBrothersFishingDMV 3 жыл бұрын

Thanks 👍🏾🤙🏾

@adamtate8268 3 жыл бұрын

@@BassBrothersFishingDMV you’re welcome man! I hope your fishing season is fire for 2021!

@Delmarvafishing 4 жыл бұрын

Man, you did an awesome job on the boat. I had to do a similar thing to my boat 2 years ago but I had to sell my house in Laurel and the boat along with it. I plan to just spend the money and get a pro guide boat as soon as I decide to buy another house in the next few years. I need a bigger more stable boat because as you can probably tell by watching my channel I am a large mammal. I am looking forward to getting back on the water more constantly when all this covid shit is over. Your channel is doing awesome by the way great content and your channel is steadily growing my man. We gotta hook up and rip some lips later on in the year. Keep growing and thriving brother!

@BassBrothersFishingDMV 4 жыл бұрын

I hear you dude. Get what you want. That's been my motto with it. You'll be happier in the end. We'll definitely link up once this whole COVID thing is over. Even if it's in the fall lol. Stay safe out there man!!!

@DesertBallistics 4 жыл бұрын

Good stuff man. Subscribed from Az

@BassBrothersFishingDMV 4 жыл бұрын

Thanks Ricky. Appreciate the Sub. Be safe and tight lines!!!

@roberthoughton458 4 жыл бұрын

Funny I also picked up a 1448 job boat from watching sbfishingtv. Perfect boat

@BassBrothersFishingDMV 4 жыл бұрын

Lol. That's too funny. It is a great boat. Cant wait to actually start using it lol

@johnjames594 4 жыл бұрын

Looking good bro...

@BassBrothersFishingDMV 4 жыл бұрын

Thanks John. Appreciate it!!!

@aydenaydenm87 Жыл бұрын

How many feet of aluminum did you use for front deck?

@Ilogrich 4 жыл бұрын

Nice work!

@BassBrothersFishingDMV 4 жыл бұрын

Trying to be like you Richard. The 😜

@Ilogrich 4 жыл бұрын

@@BassBrothersFishingDMV lol that framing is like a million times better than what I did. 😂 Can't wait to see the finished product. That rod locker looks awesome too.

@BassBrothersFishingDMV 4 жыл бұрын

@@Ilogrich thanks man. Cant wait for it to be done too 😜

@1Cast1Fish 4 жыл бұрын

Coming along

@BassBrothersFishingDMV 4 жыл бұрын

Thanks Bud. Can't wait to get it out on the water. You been out lately? Some of the ramps near me are closed.

@leekaplan2650 2 жыл бұрын

Like your video, how much weight did you add to that jon boat? Thanks.

@dwainseiber4162 3 жыл бұрын

Love the videos! getting ready to start a build with my son on his 14/48. just curious if you know roughly how much angle you used on front deck in feet? thanks for the awesome videos. very helpful.

@BassBrothersFishingDMV 2 жыл бұрын

Sorry just seeing this comment. Not sure how much angle I used but I'm sure it was at least 10 8ft pieces. Hopefully you got your build done for your son. The 1448 is an awesome size boat to be on.

@gregbreault7434 3 жыл бұрын

Hey all of your videos are great and very informative and your build turned out awesome. I’m getting ready to start my conversion and was wondering if the sub floor is a necessity or if it is mostly cosmetic? It’s part laziness on my part and part a budget problem

@BassBrothersFishingDMV 3 жыл бұрын

It's a little of both cosmetic and functional. Cosmetic because it looks good but functional to keep stuff stored neatly and clean. Also having a sub floor helps with installing your battery in terms of locking it down. But you could build a small riser or something for that. Subfloor also gives you something to rivet supports into or anything else you may need to anchor to the floor of the boat. If funds are tight skip the subfloor and work around those things as best as possible.

@gregbreault7434 3 жыл бұрын

Awesome thanks for the advice and keep up the videos they’re great!

@parton45852 7 ай бұрын

Nice build, just a heads up though, I used some harbor freight rivets and they have a steel mandrel. Had to drill them out and install full aluminum ones after a year due to the steel core rusting out.

@BassBrothersFishingDMV 7 ай бұрын

Yea. I switched over to all aluminum rivets since this build.

@kevinm.4632 7 ай бұрын

Metal Supercenter asks if wanting 6100 or 6300. Which do you get? Thanks.

@ronmcmullan9975 3 жыл бұрын

Use a miter box with good carbide blade for alum...easy and straight cuts

@BassBrothersFishingDMV 3 жыл бұрын

Hmmmm. Manual cuts????

@walterjones3819 3 жыл бұрын

You gonna try to get us a video on the water? 😎👍

@PimpnBass 3 жыл бұрын

Cant find the next video after this part 2 .

@FishinOnaMission Жыл бұрын

Why do you have the sheet and insulation. Is it necessary? What kind of insulation is it?

@BassBrothersFishingDMV Жыл бұрын

The foam is there mainly to help the boat float if you ever had an emergency situation. It's tye pink foam sheet from home depot

@sgtreckless7872 2 жыл бұрын

Would 1/16 x 1 1/2 be ok to use for the main deck?

@BassBrothersFishingDMV 2 жыл бұрын

Sure that would be ideal from a weight perspective. Just make sure you add supports wherever needed.

@ChrisBusinsky 3 жыл бұрын

What size angle did you use for the vertical supports?

@BassBrothersFishingDMV 3 жыл бұрын

1 1/2" x 1 1/2" 1/8th thickness. You could go 1/16" inch though to save on weight.

@TN-Vols-Fan 2 жыл бұрын

Hey brother, I'm to the point in my mod to do the framing. I heard you say that you used 1/16" and 1/8" thickness angle. Is it 1" or 1-1/2" angle? I'm heading to Home Depot in the morning. I've got the vast majority of my wiring finished. I'll finish the rest after framing and decking.

@BassBrothersFishingDMV 2 жыл бұрын

Hey Steve. Sorry I'm just seeing your comment. Hopefully you used 1 - 1/2" angle.

@TN-Vols-Fan 2 жыл бұрын

@@BassBrothersFishingDMV No need for apologies, we're all busy people. I did use 1 1/2"! Due to the holidays, I stopped with the mods for the time being. All of the wiring is completed along with the rod tubes. All I have left is some framing, covering the framing, paint and hydro turfing the floors.

@DrDanTDC Жыл бұрын

Quick question, did you glue the insulation board down?

@BassBrothersFishingDMV Жыл бұрын

In this boat no, but I did that on the 1436 build. It's not necessary as long as the flooring lays flush against the foam board. Doesn't hurt to do it regardless though.

@mikeprater6651 4 жыл бұрын

That’s some impressive shit. Pardon my French. Just curious but why did you go with 3/16 for the framing. Seems kind of overkill. Definitely not criticizing. Very impressive

@BassBrothersFishingDMV 4 жыл бұрын

Hey Mike. I used 1/16th, I might had said the wrong thing. The main deck is 1/8 and the supports are a combo of 1/8 and 1/16. I agree 3/16 would be some serious overkill.

@TurfSurfer 3 жыл бұрын

Where did you buy your aluminum framing from? Iv seen tiny boat nation sells it and I know Lowe’s sells it but I don’t need that much for what I want to do. Just wondering and how much was it

@BassBrothersFishingDMV 3 жыл бұрын

Lowes and Home depot charge to much. Find a Metal supplier if you can. I used Metal Supermarket. They charged more than 50% less than HD or Lows.

@TurfSurfer 3 жыл бұрын

@@BassBrothersFishingDMV thanks a lot for that! I will check them out! Keep up the awesome videos!

@BassBrothersFishingDMV 3 жыл бұрын

@@TurfSurfer will do

@XRVAEDGEX 3 жыл бұрын

@@BassBrothersFishingDMV I’m looking at redoing my deck(s) this winter on my 1432 jon boat and thinking of aluminum as well. I know you’ve said it in the videos somewhere but I can’t remember where. If you’re comfortable leaving it in writing in the comments, what were the sizes (thicknesses) you used for the framework and the flooring?

@aukevinj 2 жыл бұрын

A small battery powered band-saw would be the best for cutting that angle

@BassBrothersFishingDMV 2 жыл бұрын

You're so right. I have one now and used it on the Alumacraft 1232 build. Awesome tool

@BBBucka 2 жыл бұрын

where did you get that aluminum and what is it called??

@BassBrothersFishingDMV 2 жыл бұрын

Metal Supermarkets. Call them for the best prices. Don't order online.

@drmrjon 3 жыл бұрын

Where did you purchase the aluminum angle

@BassBrothersFishingDMV 3 жыл бұрын

From a metal shop called Metal Supermarkets. Much cheaper than HD and Lowes.

@mathewmaxwell2956 4 жыл бұрын

Would a jon boat with a aluminum deck like this make it too heavy to unload from a truck bed?

@BassBrothersFishingDMV 4 жыл бұрын

A 1448 Jon boat would be hard to unload from a truck bed without the conversions done. I would get a smaller boat like a 10' if you want to transport it that way.

@mathewmaxwell2956 4 жыл бұрын

@@BassBrothersFishingDMV lol I should've clarified. Was looking at a 1240 or something similar

@jimb6683 4 жыл бұрын

Nice build and video is well done!

@BassBrothersFishingDMV 4 жыл бұрын

@@jimb6683 thanks

@BassBrothersFishingDMV 4 жыл бұрын

maxwell that still might be tough. Check the stats on the weight first. Also, you need a pretty big flatbed for a 12 footer.

@ohio_tuner_garage 3 жыл бұрын

What size rivets are you using?

@BassBrothersFishingDMV 3 жыл бұрын

90% of the rivets I used were 1/8th Medium or long. Mostly medium though. Other than that I used a few 3/16th ones as well here and there.

@gavincopple9206 3 жыл бұрын

How did you mount the angle to floor?

@BassBrothersFishingDMV 3 жыл бұрын

I just created a L bracket using a piece of angled aluminum. Riveted it together the to the floor

@gavincopple9206 3 жыл бұрын

@@BassBrothersFishingDMV okay, appreciate the response. Just found your channel, I love i5 and subscribed.

@BassBrothersFishingDMV 3 жыл бұрын

@@gavincopple9206 Thanks and welcome to the channel 🤙🏾👍🏾

@jwc111684 4 жыл бұрын

And not even one drop of blood with that sharp aluminum lol

@BassBrothersFishingDMV 4 жыл бұрын

Man. This job definitely came with its share of cuts and bruises.

@bluerex7400 3 жыл бұрын

What is the total frame weight? Just the frame.

@BassBrothersFishingDMV 3 жыл бұрын

Not sure but with aluminum being so light weight, she rides great on the water.

@beebob1279 3 жыл бұрын

A lot of people like Harbor Freight. I by very little there. Low quality and a lot of headaches.

@BassBrothersFishingDMV 3 жыл бұрын

I agree. Be selective when shopping at harbor freight.

@jessejones414 4 жыл бұрын

Where’s part 3 brother?

@BassBrothersFishingDMV 4 жыл бұрын

Got another boat conversion video dropping soon. Things are really shaping up nicely.

@conniebennett6646 Жыл бұрын

All dust is toxic to the lungs.