@eltequilero8580 3 ай бұрын
bought mine back in 2015 and its still starts at the first crank, One of a kind saw !
@ericfuller6326 4 ай бұрын
You guys should bring the 23 series to market. My family were always jonsered and mcculloch. Bring us the 2365,2372 2385, and tge king 2392 and 2301 would be cool to.
@offroad4x4nhlife45 2 жыл бұрын
Jonsered= nothing but the best!! Imo
@cheaphomesteading 3 жыл бұрын
The saw looks good I have to try one. Have a great day
@WeSRT4 4 жыл бұрын
Sad to see the Jonsered name go....
@coltonswindell689 3 жыл бұрын
Are they done making them?
@sklm5694 3 жыл бұрын
Yeah, they stopped making stuff on 1st of january 2021.
@andysears5552 Жыл бұрын
Long shot as nobody seems to know...anyone know how and where on the trigger the spring locates into on a Jonsered 2165? Know the operator presence location, but the trigger part if driving me insane.
@andysears5552 Жыл бұрын
This may help others...Trial and error showed the way! The spring locates into the trigger by hooking into a small recess at the front right side of the throttle cable cam wheel on the trigger. You have to hold the spring tilted to the left 90 degrees, feed it under the plastic protrusion molded into the left side of the saw's handle (inside the handle where the safety trigger goes), there is a small channel built into the left side of the throttle cable cam wheel, slide the spring end along this channel until the front area of the cam is reached (nearest the saw engine), then the really fiddly bit is trying to locate the hooked end of the spring into the small trigger recess, not on, but on the right of the cam wheel (not on the cam wheel)...really fiddly to get it right, took me hours!
@tonybologna123 6 жыл бұрын
My 2255 jonsered chain seems like it's slipping with a winding sound, ..... Clutch bad?
@mailliw75 6 жыл бұрын
tony bologna definitely maybe
@tonybologna123 6 жыл бұрын
it was the sprocket :)
Back to Bob
Рет қаралды 4,5 М.
Buckin' Billy Ray Smith
Рет қаралды 53 М.