Major major props to you Joshua. No one else does it like you. We deeply deeply appreciate everything you do and highly contribute to this hobby. Thank you very much for everything!

This video in particular was extremely useful in resolving some basic setup issues in Betaflight.

My favortie part of the video was when I had to flash my blheli_s escs to blue jay and Joshua said you can change the startup sound. So anyways everytime I turn on my drone everyone around me gets rick rolled.

I had never thought about using the gyro info in the motor tab to help identify a damaged motor. Great tip.

Hello Joshua. Without your videos many people would throw their quads in the trash. Thanks to the infinite time you spend in front of your camera and researching (We who have problems can solve them) Thank you very much. Always continue with your channel! Thanks to your Betaflight tutorials I was able to solve a problem on my FC and I was able to continue with my work. THX Joshua

I have been building and flying these crazy little monsters since the first DJI Phantom came out. As I grew and branched out from Warpquads into FPV you were there to offer the no BS factual answers. (there are a few other gurus I look at but you are THE guru). Like many of your followers I have a lot of quads, and a lot of evolutions. You have kept up and supported all of the latest and greatest. As one of your may dedicated followers, especially for problem solving, I just want to thank you for what you do.

Videos like these is why I joined your Patreon. Thanks JB.

Such a good video series! Might be your best so far. Please release the rest of the series soon, actually programming my first quad simultaneously with your videos haha

Nice work Knowitall!

I just love how you are able to explain everithing so clearly, I am so gratefull for your videos, every time i have a problem with my drone this is the place i look for information, Works every time! TYSM

The grade of the explanation, low, middle, high, bardwell.

Thank you bardwell for all the info you learn everyone!

Thanks for doing this, there was a lot I didn't know. I think you are the only one to go through betaflight like this.

THANK YOU THANK YOU THANK YOU! Really appreciate you doing all this work for us! Much love

Thank you JB, I will follow all your series..👍😊🔥🔥🔥

Great video, just learned how to diagnose motors.

Awesome, Joshua! Thanks!!! 😃 Stay safe there with your family! 🖖😊

The Best thing about 4.3!!!!!!!!!!!!!!!!

Thank you Joshua!🙏💪

Learning alot! Thank you!

enjoying this walk through!!!

THANK YOU!!!

thanks Joshua

Great info. Thank's!

Thanks

¡Gracias!

Just...... Thx man.!🙏

Osom! Thank you very much!

I like so much when you play "Tou ... tou .. tou ..... tou, tou !" :)

Stumbled upon a Betaflight 4.3 instructional video……..uh…….and the first of April has gone by…….J.B., people don’t stumble here. Humility, I know that you practice it, but really. You be da one that keeps a lot of us in the know about this constantly changing environment, and do the work that manufacturers seem either incapable or too damn lazy to do. In this one you are doing the “ You know nothing, that is o.k., here’s how it works “. Perfect! And clean your fridge before your next outrow?

I'm loving these video series. Do you have a video on how to determine if a motor is bad or if the ESC is bad?

Thanks for this deep dive, was wondering about the other esc protocols though :)

If you are watching this video and you learned something hit that like button ! We watching this for free ! Is the least you could do

Hey Joshua, I'm a huge fan of your videos and think you're so knowledgeable about this hobby that so many of us love and enjoy. On top of that you show such a great ability to explain things to all levels of experience so that we all do, in fact, learn something today. I, however, have a question. I own a tx16s and a tinyhawk freestyle 2. One day when i was updating the firmware on my radio I made the rookie mistake of not double checking that I did in fact make a backup of my old firmware and had all my models saved on my computer. As you may have figured, I did not have those aforementioned backups and had to reset up my quads' profiles. Not the end of the world, right? Except for now my aux switches wont respond in betaflight. Since then it's been a few months and I reflashed my radio into edgeTX successfully and my Protek35 even still worked with the radio afterwards. Once again though, no response from my aux switches on the Tinyhawk. If you could help me out I would be so grateful. I feel like the solution is simple and im just not looking in the right place, but even still... I've been looking for months now. At this point I figured I might as well buy a second Tinyhawk Freestyle 2 but I'd like to not have to spend that money if i can help it. Thank you for taking the time to read this if you even see or get to this point. Again, I love your videos and have gained so much knowledge from them, and that's not even mentioning the wonderful community you've built. Please, help me learn something today

I still swap motor wires to change direction. Just faster if you have plugs. I busted a plug though and had to solder to board direct so now I'm here...

LOVE IT AND AM EARNING MORE AND MORE AND MORE LOL

If that's the I Flight Nasgal 5 Evoke The motor screws come loose because of the 3-D print on the bottom of the arms. Joshua you have to take the screws out and put The blue to the screw lol lock tight.

Got my gyro set and moves correctly, props on correct, motors move fine in betaflight but when trying to actually fly the front sucks down when the back should be pushing and no throttle, all the motors worked correctly before the gyro adjustment, please help!

Joshua Sir, can you please give me some direction? I purchased the meteor75 pro and the front right motor spins in the wrong direction. I have tried to change it in betaflight, and it doesn't seem to work. I have pushed the cli recommended on their site. Any ideas by any chance? Thank you for your time and great videos!

premium^^

hi Joshua! how are you? i'm new in the hobbie, but with a problem i have a baby nazgul 73mm! Why it keeps cleaning the MOTOR PROTO, the UART SERIAL and the RECEIVER PORT info from time to time?

I quad flew great until I updated to beta flight 4.5. I used the correct target. Everything is set up perfectly except for the motors tab. Dshot 600 and bidirectional dshot is turned on. I have two motors spinning and the other two show E: 100.00%. I never had an issue before with this. Just wondering if I'm missing something

I tried to configure according to your video although preview responds according to the remote control. However, the motor does not spin, even though I am able to control motors using app. I have configured the flysky transmitter and the receiver with the speedy bee F7 stack. In my Flight controller there are 4 pins for receiver (GND, 5v, R2 and T2). What should I do and what is the problem?

I have a speedybee f7 v3, is it choose dshot600 or dshot300? thanks a lot.

I just got done building a quad and when I have battery connected and connect to Betaflight, one motor is incrementally running, what would cause that?

Hi, I really need your help. After these previous steps now my motor is moving. Could you please help me with that.

Helo joshua,im new with this fpv,and i just got my dji v2 goggles and i have air unit,and im stock there do i need to do anything before starting to use the v2 goggles?,hope youll notice me,thanks

hi i got a foxeer 10 inc, when the throttle gets above 50% it becomes very instabile. what do you think the issue could be?

Hi joshua, i just updated firmware using the steps you shown in another video of calibrating drone, after updating the motors show error 100.00%. How can i fix this??

I need help, I have the iflight protek 35. was flying fine, decided to update to betaflight 4.3 applied my preset configuration and now I get 100% ESC error in motors tab. I turned off Bidirectional and now the error is gone and motors arm properly. I would like Bidirectional but cant figure this problem out.

What platform do you use for a camera platform? Not understanding.

Why did they reverse "Home" and "End" ? Just got a jumpscare from my old habit of keeping a finger on "End" during the tests...

Suddenly one of my motor stoped working, it vibrates once when I plug it in with the power but then it doesn’t work. The rest of the motors rotate. I went to the CLI tab in betaflight and typed the command “resource”, it shows : resource MOTOR 1 A15 resource MOTOR 2 B03 resource MOTOR 3 B04 resource MOTOR 4 B06 resource MOTOR 5 B07 resource MOTOR 6 B05 resource MOTOR 7 B00 resource MOTOR 8 B01 I use the speedybee f7v3 stack what should I do?

so on idle value .....in turtle mode ......does this mean that a lower value will not allow you to cut the grass so you can flip back over?

I have a blheli32 esc on 32.9 but i just get 100% errors if I enable bidirectional dshot, please help me, i dont know what to do

What can you do if betaflight not taking anything?

Im a Newbie in fpv and i need your help so If your ever on the East end of Knoxville on the weekends . Let's meet up I work at Keruig Dr Pepper over on Water plant Rd. I'm always by the river before clocking in . I use my Dji fpv , I just recently bought the Nazgul 5 hd and I was wondering if we could meet up sometime ? I'm having issues binding / using betaflight on my smart phone . Etc.. Your a badass pilot .. Goals* Hit me up .

What’s crazy I can’t get anything to pull up on ports

This is crazy. My motors are reversed (spin outward). I had a magnet come lose on a Blackbird motor making it hard to spin so I swapped all 4 motors with an old set of Velox 2306 motors I had. I went to test fly it. Ramping up throttle and no leaving the ground, just motors spinning up & pressing the quad into the ground harder. So I arm and disarm to see the motor direction and sure enough the motors are spinning backwards. Weird because I wired them exactly as the BB motors were wired. I swap the props around and it does the jump in the air and disarm thing. OKAY! Go home and hook to Betaflight to change the motor direction, but when I have BF spin the motors, they're spinning in the correct direction (outwards). I put the props back on, go back out to test fly and it flies perfectly. Somehow the motors changed direction all by themselves and without swapping motor wires and without changing settings in BF, the motors start spinning in the correct direction. How stupid is that?

Great vid series. I see you've flashed your iflight evoque. I've seen how much you love the evoque (out of the box) tune. Which tune do you like better? The BF tune that came out of the box on your Evoque or BF 4.3 rc3 stock tune?

Pleeeeeeeeease heeelp! When im controlling the motors via the configurator they spin perfectly fine, all in the right direction. BUT when I arm the quad with my receiver, all 4 motors just go wild and spin up to full throttle. I made sure to be in acro but this doesnt look like an angle correction either. I didnt find anything yet, so if anyone maybe has some advise, it would help me a looooot!

I watch this twice and did everything as in this video. I have the correct motors spinning and in the correct direction as in Betaflight. Also, my TX16s sticks move as required in the receiver tab. HOWEVER: When I disconnect from Betaflight all my motors spin in reverse compared with the setup. How is that possible?

Hi Joshua, about the motor direction, if i want to make a pusher quad, can i just use the motor remapping feature without having to flip the whole board?

I disagree with the “typical” theory of DShot by most BF people. The PID loop and DShot value are not connected in any way. The frequency of each means nothing to the other. DShot is a serial Baud rate (1 baud = 1 bit/second). It’s a transfer rate, not a polling rate like the PID loop. In my opinion, you should run the highest DShot value possible while maintaining reliability. PID loop rate is irrelevant. KISS runs a 1kHz loop and DShot2400 for gods sake. And you (or perhaps I) can absolutely tell a difference between that and 600. It’s a small gain but a gain nonetheless.

Forgot to add the various video links stated in this video, in the video description?

Hi Joshua can you answer a quick question what is the best hd fpv camera as of April 2022 range, freestyle and cruising

What are the rest of the esc/motor Protocols for like multi shot and pros hot 1000?

5 mins ago :0

is it still a release candidate or has it been released?

When I click on one of the numbers, it does not reverse the direction of the motor. I don't know why is doesn't reverse the direction. Does anyone know why this is happening?

Pineapple on pizza = boss move

hey Joshua... why do I not have access to the motor direction changing option? I've flashed the newest firmware, but in the top left it says 4.2.11 instead of 4.3.0. is it possible my ESC doesn't support it? thanks.

What if my m1 pad is burned out and i need to use M5???

i installed firmware 4.3 bf on configurator 10.8.0 and connect my drone, but hen bf downgrade itself to firmware 4,2,8 Can anyone explain what’s going wrong?? I have all drivers and download bf require to run.. So when I go to motortab in configurator, I got the message (you have to upgrade your firmware) ?? But I already upgraded.. Anyone with same problem ?