The ultimate tutorial on building an RC trainer airplane

The ultimate tutorial on building an RC trainer airplane | The best for beginners

Рет қаралды 442,934

Күн бұрын

✈ Learn to build airplanes like this with the basic online course: joyplanes.com/en/mini-course-...
★ To download the plans and see more videos, images and information about this project go here joyplanes.com/en/homemade-rc-...
(*Create an account to be able to see the extended videos only available at en.joyplanes.com*)
★ List of materials and components
★ My Strobe Lights joyplanes.com/en/product/led-...
In this project you'll learn how to build an RC airplane step by step, it's a very simple but great design that will be easy to build for beginners and fly for new pilots.
Our new website
joyplanes.com/en
Become one of us:
goo.gl/zKQ706
@Joyplanes RC
Our Spanish Channel:
@Joyplanes RC
Instagram
/ joyplanes
List of equipment I use
Cameras
Sony a6300 amzn.to/2SrtciJ
Canon T5i amzn.to/2SrtciJ
Gopro amzn.to/2ECcDwW
Osmo pocket amzn.to/2IDO8mR
Sound
Zoom H1 amzn.to/2SzhOBy
Zoom H5 (clearer sound) amzn.to/2EAG6Hk
Microphone OLM-10 amzn.to/2EmLcFM
Lighting
LED amzn.to/2tHk5AA
LED ring amzn.to/2SrJvMo
Accessories
Tripod 1 amzn.to/2Svufhm
Tripod 2 amzn.to/2SrtUfT
#JoyplanesRC #HobbyRC

Пікірлер: 487

@chinnenhon99571 3 жыл бұрын

I am a 72 years old Chinese from Malaysia. I just start to pickup this hobby seriously. I have watched your video very good. That is exact the storch l will like to build. Tq

@Declan-pg8cg 3 жыл бұрын

@Lance Harlem I've seen you put this irrelevant copy+paste comment in numerous video threads on KZfaq. No one cares for your spam.

@moonscrafts8987 2 жыл бұрын

Mr chin we are with you 🙂

@usamashehzad5655 2 ай бұрын

bro you alive? just checking.

@Joyplanes 4 жыл бұрын

I hope you enjoy this video and take your free time during this pandemic to build it, take care and fly on open spaces without having contact with others, that help save lives, at the same time there's no need to fear, just be aware and take care.

@Joyplanes 4 жыл бұрын

@@MohamedAhmed-iq8dc Hey man, this is a modified version of the FT Simple Storch, really slightly modified so is basically the same, I stated that on the web post, and I'll keep modifying it to the point it is a bit more different from the FT version, but it is a wonderful base point for a trainer airplane but I found some things I'd like to modify already.

@dsnyder05 4 жыл бұрын

@Joyplanes RC It looks like the new website is down. I can't get to the extended video and other information. Hopefully you can get this taken care of. I really like the lines of the plane. I like the Storch, but your redesign looks so much nicer! Excited to try it out!

@Joyplanes 4 жыл бұрын

@@dsnyder05 Some times there's some maintenance, have you logged in yet?

@jjoshlat Жыл бұрын

What size wheels did you use because the ones in the parts list were discontinued?

@amandapacheco9398 8 ай бұрын

@@Joyplaneswill ela foam work

@nickt5546 Жыл бұрын

I built one and finally flew it this morning. It was awesome! It’s the first 4 channel airplane I’ve ever flown and it was a blast 👍

@khanghoang4848 Жыл бұрын

7*. 3:42

@harpreetsingh8844 4 жыл бұрын

Thanks Man! You are very organized and very good at explaining the details. It is very professional. Keep going!

@quail4sale334 Жыл бұрын

Great video! Neat project! I've never built or flown a RC plane, but now I want to do both!

@henryhb6302 4 жыл бұрын

Just finished building it myself. Looks great and generally easy to build. Good job!

@usmanashfaq7497 4 жыл бұрын

how much time it takes to build it?

@rahultej2248 4 жыл бұрын

4 hrs

@rahultej2248 4 жыл бұрын

Shivendra Yadav no, I estimated that. And iam definitely gonna make one. In the cost of 4000 inr This is gonna be my second project. If you wanna see the tutorial of my version, I’ll link my channel. Even though 32$ is ridiculously less, My version is an upgrade. And the weight is less than half.(350gr w/o battery) And with a long range simple diy transmitter and receiver Which costs just 1200₹. Ps: my first project is a flying wing.

@rahultej2248 4 жыл бұрын

Shivendra Yadav I haven’t made a video yet. I will share the link as soon as I upload the video. And the channel link: kzfaq.info/love/J3Gmtzeza3_W3Z6ViyPyfg

@dramaticdrawings8286 Жыл бұрын

@@rahultej2248 can u send the link

@vincentlagogue2791 4 жыл бұрын

Thank's you a lot for this very complete tutorial :)

@ATrustInThrust 4 жыл бұрын

Really like that control rod connection method with the heat shrink, I’ll be trying that!

@soufianesoufian9552 4 жыл бұрын

مهو نوع هدا الكغتون

@unity3d706 4 жыл бұрын

Nice

@sirjasim4469 3 жыл бұрын

Emazing take off and perfect landing

@cesarbarron662 4 жыл бұрын

The way it takes off so easyly is awesome!! Congratulations! Definitely it must be built with flaps.

@MasboyRC 4 жыл бұрын

Really nice build video !! Thanks for sharing. Appreciate it 👍

@ayushkaiwart2451 3 жыл бұрын

Perfect for beginners to start with. Thankyou♥️

@magnusericsson8684 4 жыл бұрын

Flies real good, really gentle, I think I will give it a try. Only downside is, when you lawndart your plane, and chances are you will as a beginner, I have for sure :), motor will never be as good. Pusherplanes have that advantage.

@carlosr.982 2 жыл бұрын

Shrink wrap around the push rod to make a quick disconnect, you are a genius !!!!

@andreadellamico1217 3 жыл бұрын

i done my third flight with this plane yesterday, tnx a lot!build something and bring it in flith is a beautiful feel.... greeetings from italy

@jjab99 4 жыл бұрын

Great job, well done.

@EngenheiroEletricHyanGontijo 4 жыл бұрын

This plane reminds me I play the Real RC Flight Sim 2016! Excellent video, bro! Thanks.

@smks5 4 жыл бұрын

When will the "improved version" that you mention at the end be available? What are you looking at changing?

@gtiplus 4 жыл бұрын

Wow! you make all of it look so easy. I'm researching beginner RC planes for my son and I to learn together (he's 11). Your build seems a little challenging but looks fun. Thanks.

@daviddavids2884 4 жыл бұрын

some info. 1) paperclad foamboard is HEAVY. in Most cases, its use results in tail-heaviness in the dom. distribution of mass. 2) overall heaviness/auw leads to a need for 'more' wing area/lift. minimum wingspan should be, say, one yard/meter. (mitigation of both is possible; via the use of panel cutouts. but No one ever does it.) 3) consider whether the price of a simulator would be 'worth it'. especially, if you live where the weather is frequently not great for flying. 4) a novice pilot can spend a Lot more time flying/smiling, if he chooses the right type of model (to learn on). that being, a light-weight, three-channel slow-flyer. such a model must have a dihedral main wing, in order to avoid the need for ailerons. while there are some manufactured models that will fly slowly, the main wing may not have enough dihedral, to allow the use of rudder-initiated turns. two examples of a slow-flyer. cheers googletranslate kzfaq.info/get/bejne/osBhqbh8yNHYhp8.html kzfaq.info/get/bejne/aN6Aktp1ypq5gKM.html

@rishabhsolankichannel4272 4 жыл бұрын

Hi bro you are excellent wow everything from your videos makes me inspire to do as well thanks you are working hard for better videos and better knowledge thanks you helped me in understanding many topics and thing thanks bro

@Declan-pg8cg 3 жыл бұрын

I was flying my planes in those fields right beside the Papal cross in the Phoenix park just the other day. It's right beside where I live and very handy.

@creylo200 2 жыл бұрын

I'm new to the RC aspect of this hobby and i want to build this plane, but when i checked the item discription it said that you need a soldering iron to build the plane which i don't have. I did however notice that the only time you soldered anything was when you added the strobe lights. I'm not going to get the strobe lights so is the soldering iron still necessary?

@Bass-guitarist 3 жыл бұрын

Saw this and subscribed before the end of the video! Thanks

@1979zeesh 4 жыл бұрын

Awsome tutorial mate.. Im going to try that. Pardon my ignorance but why we don't need flight controller in these planes? Also if i need to increase wingspan then apart from dimensions, what else needs to be modified?what range uve reached so far vid this its remote?

@alexanderlam8121 4 жыл бұрын

Hey there, Very nice build. I just have a quick question. I can't ship the battery from CN (dunno what that is) to my Location, Germany, do you have an idea where to get one? Otherwise you also can give me a secondary battery that would also work. Thanks a lot.

@AdrenalineAshRC 3 жыл бұрын

Awesome how to video really enjoyed it. Il be saving this video to Watch again when I build one myself . Thanks dude awesome channel just subbed 😎👊

@tonyross1181 4 жыл бұрын

Great build. I'm going to download the plan and build one for myself.

@ufo1019 4 жыл бұрын

Mee to

@adampaulik8837 Жыл бұрын

Quick question: how many flight minutes can the battery from the component list last assuming an average flight?

@MrGabirahellim 4 жыл бұрын

Perfect DIY rc plane.

@freiherrvonbraun6942 3 жыл бұрын

Can I use depron 5mm foam for this? I'm confused bw the different types of foam. And is the foam laminated?

@shreevedtadas9604 4 жыл бұрын

How did you setup the rudder to move in both directions

@richardroumen 3 жыл бұрын

I am aiming to built this plane but miss some information: Can I get information on how to print on A4 paper and fit it into one drawing? borderless printing is not possible and I have difficulties to fit each sheet. What are the sizes of the wheels and what is the size of the landing gear. ( as simple line on the layout would have helped a lot).

@LuzuVlogsGamer 4 жыл бұрын

How can i get that Universal Controller for RC planes?From were and is it universal for every plane?

@georgecrawley767 4 жыл бұрын

Can the 930kv kit be used as the 1000kv is out of stock?

@logiknotlogic6586 3 жыл бұрын

Hey! How fast does this plane fly? Does the flight time increase if I use a 3S 3000mah battery?

@DSB1234567890 Жыл бұрын

I'm just thinking about getting into RC so I don't know much - are there tools that make it easier to do the half-thickness/V cuts? I don't think I could do it precisely cutting freehand with a scalpel!

@wiliambbnb7805 Ай бұрын

Hi, I’m finishing up this project but I’m not sure exactly where to pin the motor sleeve. Do I push it all the way up to the top and pin it in or does it lay on the bottom or float somewhere in the middle. I don’t want to get this angle wrong and end up with a dozen holes because I have to keep moving it.

@easy_3d 4 жыл бұрын

What is the name lf the graph sheet you laid on the table?

@nahar7696 3 жыл бұрын

It's really a very good detailed video thanks to you.. But it's ok to use 2400kv motor with 4s lipo batt with extra weight to the fuselage.. or it will be to fast and hard to control.?

@prathameshkalaskar9250 4 жыл бұрын

This plane is very good for beginners, very is to build, easy to fly. Well I'm searching for some DIY long range fpv planes like GT rebel!

@minutewithmitch7609 2 жыл бұрын

Yes need all the details no other youtube video is like this their all about learning why servos do etc, I want to learn everything!!!!

@ronaldwitt972 4 жыл бұрын

Nice build ..think I will build it soon....thanks

@PeterBrownOmegaSecurityLTD 2 жыл бұрын

Where did you get your plans for your rc plane in this video . Many thanks Peter

@springsunshine23 4 жыл бұрын

i want to make this but from where i purchase the items used in this

@Tiger00010 4 жыл бұрын

Well done Support from Bangladesh

@donnieeudy4745 4 жыл бұрын

Good job I all ways like your videos I have built a lot of the planes from flight test my self keep up the good work I will be watching

@usmanashfaq7497 4 жыл бұрын

in how much time did u build rc plane?

@orangetech8419 2 жыл бұрын

What is the distance between fuselage nose to wing leading edge and is there any formula or condition that the wing as to be placed at that particular spot only?? Please answer this question I'm really confused

@frankgordonsmith4795 4 жыл бұрын

Your channel is so underrated eventually your channel will explode, seeing as your content is so good.

@unity3d706 4 жыл бұрын

Yes its amazing

@unity3d706 4 жыл бұрын

I am also trying to make my channel like this bro

@a21npilot91 2 жыл бұрын

Cool! I will make also one soon. But in my place there are not enough flat terrain, so I will try to reinforce tail for hook. Will it work?

@bbusyflying Жыл бұрын

There is a foam angle cutter you can buy to cut foam in 90 and 45 deg, the 45 deg hinge cuts and 90 deg bends will be extremely accurate and aesthetically the plane will look much better

@CaptainFishbones Жыл бұрын

Can you throw up a link?

@saifuddinmanik1846 4 жыл бұрын

Great plane and I am going to build this one

@annefrank3225 4 жыл бұрын

Wish you could show how you setup the radio and how to know what range you might get with different configurastions

@SMQ_90 2 жыл бұрын

just made this. really fly well. only problem i faced is given smooth curve to front end of wings.

@royd7984 4 жыл бұрын

Is that a model that can be purchased or scratch built? Very nice plane. It would be fun to fly. Thanks!

@deepbhatti9583 4 жыл бұрын

Awesome 🔥

@luisalvarez393 3 жыл бұрын

I want to make planes like you, I want to speak English like you jejeje, good job.

@younisal-khalidy1075 2 жыл бұрын

@joyplanRc do we need any mathematical work to build a new aircarft design???

@i_n_93 3 жыл бұрын

Perfect work

@acestudioscouk-Ace-G0ACE 3 жыл бұрын

Nicely done!

@technicalbrogaming3864 10 күн бұрын

Thanks it helped me make a plane for my school annual project

@guritche 4 жыл бұрын

What size are the wheels please? Thanks!

@markod1977 4 жыл бұрын

Great plane!

@MrCreative-j9f Күн бұрын

Very nice bro 👍👍👍. Love from Bangladesh 🇧🇩🇧🇩🇧🇩.😊😊😊😊

@kigabuma 3 жыл бұрын

Thanks for the video.

@junexdallas1 Жыл бұрын

Thanks a LOT. After losing my rc first airplane on my third flight (due to wind, misaligment of the controls due to previous similator practice and many human ME errors as always), I am ready to fly again and this looks like a great option to be passionate about what you are creating and the care on it. I will do it, thank you!

@jackgamer7470 3 жыл бұрын

You are the best rc hobbyst 🙂🙂🙂

@ManishKumar-jy6xv 4 жыл бұрын

How much kV of motor and mah of battery have you used.

@phineasratshosa4982 4 жыл бұрын

Great Video. What is the overall flying weight

@shivamborade7276 4 жыл бұрын

which foam board was use to build it

@YeasinArafatHridoy 3 жыл бұрын

Successful I completed this Plane now time to flying 😊 Thanks #joyplanes

@Dann_eyy Жыл бұрын

I am working on making a plane fly and I dont want it to be rc yet so now my question, where do you put everything like the wing or the elevators, how do you know where to put them?

@bagavathi9428 3 жыл бұрын

Sir please tell what is the total weight of the rc plane with battery and what is the kV of the brushless motor and which propeller do you use

@dd-ri2jw 3 жыл бұрын

Amazing video. Can you please give the detail of the foam board ?

@janzelvaldes1062 Жыл бұрын

Hola Joyvel, descargué el plano de este modelo y acabo de terminar de construirlo pero temo que no tiene suficiente empuje para elevarse, seguí tu consejo de usar la hélice recomendada para mi motor que es una 5045 pero creo que le quedó pequeña en proporción al tamaño del avión. El motor es de 2300 kv de 1 kg de empuje y la batería es de lipo de dos celdas, mi duda es si usando una hélice tal vez de 10 pulgadas pueda tener suficiente empuje para elevarse.

@cosmorito961 2 жыл бұрын

Which one is easier to fly joytrainer mini or joytrainer? And which one is cheaper? please reply, I am planning to make one of them

@hossain909 2 жыл бұрын

How many thrust need for smooth slow flying by it ?

@poeticnight9339 3 жыл бұрын

As your fan, I have a request to build a classic aircraft 'Bleriot XI' withaileron, elevator , rudder & landing gears by using depron foam sheet. I think it will be found most popularity among the world. As this classic aircraft is not available in web world in depron foam format. Looking forward for your responding.

@patrickrinehart4393 Жыл бұрын

Well done good sir. Great channel!

@WilliamWill 9 ай бұрын

i recommend that before you go to the field, that you spend days, months and hours on an RC Simulator so you can crash with out screwing your plane.

@mylife5365 4 жыл бұрын

I support you from Bangladesh. I have a question? Are you using motor and prop use?

@dpal9892 3 жыл бұрын

thanks sir. sir i want to know why used 4 servo motor for wing..

@edgarmorales7593 4 жыл бұрын

Great. I like this plane.

@Esanmurphy Жыл бұрын

Any way to do a sort of air drag on it? Maybe a flat spin or cobra? That would be coll

@methodchaining 3 жыл бұрын

Can you please make a delta wing fighter looking airplane as well. Something like the eurofighter or rafale. Thanks

@MASTER_FLYERSLK 7 ай бұрын

What is the best plane to make with 1400kv brushless motor, 30A ESC ? (for biginner)?

@electroscientist4447 3 жыл бұрын

I really would like to build it but I cosses A2212 10t 1400kv 3s motor with 1045 motor . Can you suggest me was it good If it wasn't than what should i change Plz really want to need this

@ashkananali8571 3 жыл бұрын

How do I design it from foam material

@wheatboy2468 4 жыл бұрын

amazing was that wow like subscribed :)

@AliAbiri1 3 жыл бұрын

Great explaining and details. Thanks. I made the fuselage, but as I glued the two pieces, they are not perfect 90 degrees. I was wondering if this makes a big difference in flying the aeroplane? The longitudinal axis is perfect, just the side angles are a bit out. The wings, elevator and the rudder also aligned perfectly. I appreciate if you can advise on this 🙂🙏

@Joyplanes 3 жыл бұрын

Fuselage it's ok, the critical parts are the alignment of stabilizers and wing

@AliAbiri1 3 жыл бұрын

@@Joyplanes thanks for the quick reply. Much appreciated. I'll make sure that rudder and elevator align perfectly with the wings. What is the best spot in terms of stability to mount an action camera on the plane and what is the range of the radio? Thanks 🙂🙏

@Joyplanes 3 жыл бұрын

@@AliAbiri1 you can put the camera in the wings or in the fuselage as long as the CG is not affected.