See more at Countersteer. www.jpcycles.com/countersteer?How_to_Measure_for_Cables_and_Brake_Lines_Without_Your_New_Handlebars&LvFTy-6o9w

Plus 6 from what? Would you have to know the size of the cables you are replacing? In my case, I have short ape bars, whose size I do not know, and after market braided cables. What initial cable measurement do I start with, for a 2000 Springer?

The very definition of "Pro Tip" great video

Cool idea with the wire as a visual aid. never thought of that.

Thank. That what I was asking and you put it out just as I need dose your. Shopbsale cable and brake lines.

I wish you did this video 3 y ago! My clutch cable is a little short and the brake is little long, lol! And I ordered from the site where they said it was a matching kit...….Oh well.....Good job!

Who makes a riser (chrome) in a 2- inch diameter and 2- inch height? I think the bars are called Fat Bars, but I can't find anything. The bars were added to a 2004 Harley Deuce.

10” ape hangers, would I need new cables?

I currently have 11 inch "ram horn" bars with a 2 inch riser. (1999 FXDWG OEM) I'm interested in swapping them for 14 inch lane splitter MX T-bars. They have basically the same dimesnions, but in a very different profile. Will I need any new cables?

awesome video ty

Where you get cable just little longer about 3 in. Longer you have fit some make them are can get them just little longer ?

Question if you where doing this backwards going from a higher handlebar to a lower profile handle bar would you get shorter cables or would you keep the longer cables

Great Hack

What if you have 16" ape hangers and want to change them for 10" mini apes. Do you need new cables or can you loop the excess cable somewhere?

I have a +6 kit, but not sure how throttle cables work? How do they connect to others to extend it. Never changed them before. They are short

I always used a length of 3/8 soft copper tubing

I have a 2001 heritage softail classic and have a stock bar but want to go 14". Do I need to extend cables or should I be okay with stock cables?

Where's the tank and fender cover

I'm going the opposite direction I guess I'll just hide all the slack somewhere for now if it's going to work the same.

If my stock brake cable on my 09 sportster is 39 1/2” long and I want 8” z bars what inch cable do I need +4 or +6 ?

yes, 6 hours to find that thing

You should have spoke about the brake line ends . They are selling brake lines that don't match the stock lines. The end of the brake line is female and requires a fitting adaptor...male x male to fit the junction before their female line will work. The junction requires male fittings but the extended brake lines being sold have a female end , what a dumb ass thing to do. The other option is to buy their junction with the lines welded in the junction , that's dumb too ! Who wants that junk ? Only one brake line needs to be bought is from the junction to the brake leaver with one end a male fitting to screw into the junction ....But oh no they want you to spend 140.00 only the whole set. The hardest thing is finding the extended cables before buying the apes. I haven't bought the bars because of this China junk