JRM-01 Aerodynamic Tuning | Landing Gear Design

JRM-01 Aerodynamic Tuning | Landing Gear Design | 3D-Print Jet Project

Рет қаралды 70,801

7 ай бұрын

Get the STLs on our new website:
aerojtp.com
Get your Bambulab 3D-Printer and Material here:
shrsl.com/29j33-2yn7-1cwx9
*Affiliate Link
#bambulab
If you wanna support this project, you can become my Patreon:
/ rene_rosentraeger
Or buy me a coffee :)
www.buymeacoffee.com/ReneRc
Support me on Paypal:
paypal.me/rrosentraeger

Пікірлер: 137

@renerosentraeger 2 ай бұрын

STLs on: aerojtp.com

@__shifty 7 ай бұрын

the straight servo arms on the landing gear are super sweet. mechanical advantage

@airlineflyergg 7 ай бұрын

NACA ducts over the louver for sure. On the next iteration twin 64mm 6S is the way to go! Great work.

@DavidCook42 7 ай бұрын

Beautiful design work ! It's amazing how much detail the panel lines add !

@marcphilippveenendaal4394 7 ай бұрын

That’s what we thought as well! It’s a lot of work but we’ll worth it!

@oOWaschBaerOo 7 ай бұрын

the difference in stringing is not acceleration, its retraction settings.. the bambu has different retraction requirements than the ender, if the ender is a bowden it gets even worse, you should print a retraction tower on the ender and determine the correct settings for its setup

@arduav1 7 ай бұрын

You can't solve lw pla stringing using retraction settings

@renerosentraeger 7 ай бұрын

That's the point.

@Exaspatial 7 ай бұрын

Elaborate or you're bad youtub😅@@renerosentraeger

@matiasherrero7376 7 ай бұрын

really good work, this is the first video of u that i have seen, new sub

@renerosentraeger 7 ай бұрын

Welcome aboard!

@Bbuzz8393 5 ай бұрын

Another incredible job! The amount of time and testing you spend on your designs is amazing. My vote is for the NACA ducts for the wing top hatches.👍

@gafrers 7 ай бұрын

Love the development and progress.

@trasher2848 7 ай бұрын

Einfach Klasse!

@phaley51 7 ай бұрын

Can’t wait to build this!

@user-im8vb9xq8l 7 ай бұрын

The tattered work gloves speak of the many hours of hard labor he endured throughout his life.

@shaunodriscoll 7 ай бұрын

The development of your jet has been fantastic to follow and very interesting. The jet looks incredible! Merry Christmas

@renerosentraeger 7 ай бұрын

Thx man! Merry Christmas

@strat1960s 7 ай бұрын

Stunning! Thank you for sharing your work.

@markmrabu9032 7 ай бұрын

Stunnning. Thanks 4 sharing the process!

@Streetsy 7 ай бұрын

Looks fantastic. Well done.

@tylerbeckley2403 7 ай бұрын

So excited for the finished design. Keep the updates coming! Merry Christmas 🎄

@renerosentraeger 7 ай бұрын

Thanks Tyler, I'll do so! Merry Christmas🛫🎉

@finnvolkel1431 7 ай бұрын

As always, very nice!!

@Nahngunnarson 7 ай бұрын

Beautiful

@carbonEYE007 6 ай бұрын

Your capabilities are pretty amazing it’s nice to be able to create from thin air

@aviator267 7 ай бұрын

Amazing work. Unbelievable. 🎉❤

@niklasburgin2976 7 ай бұрын

Nice Jet you build there. Is it inspired by the Su-57 Felon?

@darktdi85 7 ай бұрын

Sehr cool 👍🏻

@renerosentraeger 7 ай бұрын

Danke 👍

@thewatcherofpaintdry9288 7 ай бұрын

it's amazing

@NazarLesyuk 7 ай бұрын

awesome, you are rock

@makermind2050 7 ай бұрын

Whoa what a legend! This is sick. Makes me proud to be a german ☺️

@renerosentraeger 7 ай бұрын

Yes😁👍

@dragonminz602 7 ай бұрын

A thing of beauty

@skydragon1966 7 ай бұрын

amazing work

@sierraecho884 7 ай бұрын

And all of that in SolidWorks. The damn software crashed like 10 times on me in the 2017 or 2018 version xD

@laiebi_3639 7 ай бұрын

Using it at work and it really is a pain to work with once projects get bigger/more complex. For simple stuff its ok

@jancadevries6553 7 ай бұрын

Dear René, this an amazing project! Beautifull! One thing got my attention: you have hinges on your battery hatch that are at the aft side of the hatch, to make it more fail safe you should put them at the front. The aerodynamic forces will than always push the hatch to the closing position! But thit is just a minor point in your verry sophisticated design! Have a nice Holliday season! greetings from a cold and wet Holland from Jan de Vries.

@renerosentraeger 7 ай бұрын

Thanks Jan!

@ememeable 7 ай бұрын

Merry Christmas and a prosperous New Year ❤ Ejike

@hardcharger16 7 ай бұрын

NACA inlet is my preference This project and your work in general is amazing!

@renerosentraeger 7 ай бұрын

Thx for your vote man!

@electricflyer81 7 ай бұрын

Is there a timeline when then project will be available for sale on your website? I've been following the progress and the JRM-01 looks amazing...

@operaswift8623 7 ай бұрын

I think it will be ready for spring and for summer flying season 💪💪

@sierraecho884 7 ай бұрын

Don´t fly RC anymore (since in Germany it is a huge pain in the ass after the drones came out and they changed all the laws) but those models are awesome, well done. Love the "hello, zis iz zhe Germanz" flair of the video ^^

@mytubehkjt 7 ай бұрын

Ignore the stupid rules and fly anyway. Mass non compliance is the only way.

@sierraecho884 7 ай бұрын

@@mytubehkjt Yeah I did for a while, but I mean honestly Germany is a huuuuge pain in the ass in regard to rules. I have never met (beside the Brits) a nation of freedom haters like Germans, seriously. You can´t even ride a "Moped" without a helmet on by law AND THE COPS TAKE THAT SERIOUSLY, nobody else would even give a fuck. So they also enforce that kind of nonsense. You have to register that "toy" thing and baby it and all that shit, honestly I am too old for that shit. We will be moving to Switzerland anyways, so fuck that place.

@oOWaschBaerOo 7 ай бұрын

for mass you need mass though, only the rich can afford flying rx now cause of all the insurance bs you need here and restrictions and those 100% Wont fight against it cause they can just pay it off@@mytubehkjt

@tymoteuszkazubski2755 7 ай бұрын

@@mytubehkjtI think the bigger issue is the German CAA implementation, in Poland obtaining A1/A3 certification is trivially easy and free. There are even regular long range BVLOS operations.

@J-dk3bv 7 ай бұрын

Den ganzen ESC in Schrumpfschlauch?! Behalte mal die Temps im Blick.

@kkuenzel56 7 ай бұрын

Awesome video! I recently received my X1-Carbon and would someday like to 3d print an aircraft. I would like to see a video on your techniques for printing LW-PLA.

@ememeable 7 ай бұрын

Your finish is absolutely beautiful It is my journey and I hope to get there someday Once more Merry Christmas

@renerosentraeger 7 ай бұрын

Merry Xmas 🎄

@motoflyte 7 ай бұрын

You should print the outer wall in stronger pla and the internal sections in light weight pla

@user-on8je2sg9q 7 ай бұрын

Великолепная работа. Молодец.

@renerosentraeger 7 ай бұрын

Thanks!

@velocistafpv 7 ай бұрын

René, I'm curious to know how much it would weigh in total; just the printed parts together as well as including all the electronics?

@renerosentraeger 7 ай бұрын

Printed parts about 900g rest about 1kg. So 1,9kg TOW.

@Cute_Maxi 7 ай бұрын

Now add head tracking FPV to the cockpit for the ultimate experience!

@renerosentraeger 7 ай бұрын

Sure 💪

@JeanIIDeux 7 ай бұрын

This and a cockpit for 6 inch figure in the works.

@ryancheesman400 7 ай бұрын

Great progress! Are you going to make gear covers / doors next?

@renerosentraeger 7 ай бұрын

Not on this small JRM-01 version.

@vladzhukov2344 7 ай бұрын

😊😊😊

@RegisMichelLeclerc 7 ай бұрын

I would add a metal mesh at the front of the inlets to avoid "foreign objects" getting into the EDFs. Maybe it's overengineered, though.

@renerosentraeger 7 ай бұрын

Yeah, good idea 👍

@pilotimodele4598 7 ай бұрын

👏👏👏...😜👌

@user-yc3qm3ht2g 7 ай бұрын

Imagine a carbon fiber/fiberglass Version

@gofreboy 6 ай бұрын

Excellent work, the design is incredible and beautiful. Are you going to sell the stl files at some point? Greetings!

@renerosentraeger 6 ай бұрын

Yes, end of the month is planed.

@Zoey_the_Rat 7 ай бұрын

Awesome job. I'm designing my own 3d printable plane now, although it's going to be the opposite of yours - a glider. I'm mid way through modelling the wing

@renerosentraeger 7 ай бұрын

Great, go for it mate!

@ohernand99 7 ай бұрын

What an amazing design, mind-blowing! How do you call the zig-zag things on the surfaces? couldn't get it. Congrats! Can't wait to see it flying!

@renerosentraeger 7 ай бұрын

This is a Turbolator.

@kraken23. 7 ай бұрын

Good day sir, I am so inspired by your work, it looks and works so elegantly. I also want to repeat this, if it’s not difficult for you, could you share with the model of the airplane? I also want to 3D print my own plane.

@fanmma7819 7 ай бұрын

SU 57?)

@HK_3.0 6 ай бұрын

Can you pls do a full build tutorial

@shawnrinkel8377 7 ай бұрын

I love it. When the files are for sale will the version without the embossed lines be available? I love it perfectly smooth. With the tabulators of coarse but no other lines.

@renerosentraeger 7 ай бұрын

Yes, we plan to do it someway like this.

@Andreasporsche 7 ай бұрын

💪👍💯

@JeanIIDeux 7 ай бұрын

Vtol testing soon? Side landing gear could be "shielded" offering another way to style the plane... 😉

@renerosentraeger 7 ай бұрын

Yes👌

@mytubehkjt 7 ай бұрын

Where and how did you get 180 degree servos please?

@renerosentraeger 7 ай бұрын

I'm using a servo expander.

@goforitpainting 7 ай бұрын

WOW

@knrohith051 7 ай бұрын

Which software is used to design

@lukas20073 7 ай бұрын

SolidWorks

@knrohith051 7 ай бұрын

@@lukas20073upload 2D Make a design tutorial and drawings it will help students like me plzzzzzzzzzzzzzzzzzzzzzzzzzz

@LouisSprandel 6 ай бұрын

Can you Guys please calculate the Radar Signatur from that jet

@tonyorsini2301 3 күн бұрын

Hi i bought jrm01c . How is the front stearing set up, must be centred to retract and connected to rudder how do you stop it turning when retracted. Your wiring diagram is missing stearing servo, and the alieron starport servo arm is wrong and i had to mirror it . Your build plans are missing a lot of info.

@BlueSparrow13 7 ай бұрын

Heres a question. With 3d printed aircraft being so heavy and having the room to do so, why not us the mordpowerful and efficient 64 mm EDF over the curent 55?

@renerosentraeger 7 ай бұрын

Each size got its benefits.The next versions will be bigger.

@JeanIIDeux 7 ай бұрын

Dont mean to be a bother but will you inclide provisions for flight lights to be installed? Mig 29 landing gear light would be nice.

@renerosentraeger 7 ай бұрын

Yes, for cob led.

@tylerbeckley2403 7 ай бұрын

Is the grill not needed for VTOL functionality? Or is the new inlet design just for cooling the esc if not using vtol?

@renerosentraeger 7 ай бұрын

Exactly 👍

@__shifty 7 ай бұрын

grills are cool, but that inlet is cooler, could be a tad bigger

@antonioalemar5406 7 ай бұрын

Rene, I bought your SU XR model and trying to print the parts with Bambu Labs P1P - PLA Aero. Can you share your LW PLA settings for Bambu Labs? My prints are not looking that great with the BL PLA Aero Preset. Also the weight is coming up higher than expected.

@renerosentraeger 7 ай бұрын

Think you found it on my Patreon page👍 Merry Christmas

@antonioalemar5406 7 ай бұрын

@@renerosentraeger I did thank you! I do have a bunch of BL PLA Aero. I’ll wait for you to post those.

@taham6757 7 ай бұрын

can u plzz make a detailed video about the full designing process in cad and how did u make the simulation

@renerosentraeger 7 ай бұрын

You find that all in the JRM-01 Playlist.

@taham6757 7 ай бұрын

yes thx but like a tutorial for example for making the design with tips and tricks in cad @@renerosentraeger like yes the video go over everything amazing work but it dosnt go on how u made it in cad would like to see this video thxxx

@sebastiantomczyk4577 7 ай бұрын

16:09 didn't you isolated the radiator from air flow by putting it in that foil?

@JeanIIDeux 7 ай бұрын

He cuts it open later, 20 secs after

@RC_VIDEO-fh6bs 7 ай бұрын

Hallo René, welches LW-PLA bevorzugst Du? colorFabb oder PolyLite?

@renerosentraeger 7 ай бұрын

Colorfabb und 3dLabprint

@RC_VIDEO-fh6bs 7 ай бұрын

Ist es möglich gedruckte Teile von colorFabb mit 3dLabprint zu verkleben? @@renerosentraeger

@renerosentraeger 7 ай бұрын

Na klar!

@andarilhoblackpillimortal4579 7 ай бұрын

Andarilho 🐺👣👣👣👣

@ChineseSweatShoppe 7 ай бұрын

I saw that you placed heat shrink on your ESC, wouldn’t that be counter productive to completely seal up your heat sink? If you removed it, I didn’t se me it and you can call me a clown 😂

@renerosentraeger 7 ай бұрын

Cut out was made later on.

@Bbuzz8393 5 ай бұрын

Any idea when this one and the X-32 will be available for download?

@renerosentraeger 5 ай бұрын

The JRM-01 will be released next month. The x32 is not my project so I don't know.

@Bbuzz8393 5 ай бұрын

Thanks for the reply. It’s an incredible design.

@Bbuzz8393 5 ай бұрын

@@renerosentraeger Excellent! Do you think early or late March? I'd like to get one built for an event I'm attending this spring. Thanks for your help!

@acatsbantering7183 6 ай бұрын

I see it as an f29 or a mig 22 if you know you know

@fkthe9to556 7 ай бұрын

Will you be making this available to buy the stl file

@renerosentraeger 7 ай бұрын

Yes.

@mahmoudhusseinmohamed3394 7 ай бұрын

Will this be available to purchase?

@renerosentraeger 7 ай бұрын

Yes, soon.

@skyline4394 6 ай бұрын

Will you share the stl files?

@renerosentraeger 6 ай бұрын

Yes, soon.

@stephanephilippe334 7 ай бұрын

You share stl?

@renerosentraeger 7 ай бұрын

Soon

@caiolucio2550 5 ай бұрын

Como comprar o stl?

@renerosentraeger 5 ай бұрын

Soon

@DenysSene 7 ай бұрын

😲

@ginofoerster 7 ай бұрын

Hi sag mal bescheid wenn du auf du Flugplatz bist würde mir gerne den Testflug angucken. Ich gucke schon eine weile deine Videos und habe gesehen das das bei mir in der nähe ist.

@motoflyte 7 ай бұрын

Looks like you need to dry your filament

@kaboom-zf2bl 7 ай бұрын

4,000 Kv . wow 4 Mega Volts .... thats a shit load of power to work ... bet it is supposedto read 4Kv .... for thrust instead of what it has ...

@renerosentraeger 7 ай бұрын

Kv means something like revolution per Volt.

@kaboom-zf2bl 7 ай бұрын

@@renerosentraeger not when measuring thrust ... it is 4kv fan it is a miss print on their end tbh ... some chinese person who saw 4 000v and translated it as 4000kv ...

@user-cu2yq3we3q 7 ай бұрын

Nature takes away any faculty that is not used.

@OminousPinapple 7 ай бұрын

Please run an audio filter when post processing the video to remove the ultra high pitch frequencies.. I almost crawled out of my skin at around 12:00 onwards for the landing gear tests 😅😅