Junkyard Ford 445 FE Gets Modern EFI - Engine Power S8, E4
Рет қаралды 548,175
Күн бұрынOur 445 FE is back, a modern EFI system, along with a time-tested tunnel wedge intake made for drivability. #ford #engine #horsepower
Check out the PowerNation store for shirts, hats, and more: pntv.us/lnk_f8a2aba5
Want to watch POWERNATION completely ad-free? Subscribe at the link below and receive the first month for just 99 cents:
pntv.us/lnk_3d0d9e0c
Follow POWERNATION Everywhere:
www.powernationtv.com
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE
FiTech
Go EFI 2x4 Throttle Body System
pntv.us/pn_pt_16907_600b57218...
Matco Tools
16V Cordless Infinium Reciprocating Saw
pntv.us/pn_pt_16909_600b579da...
Summit Racing
Summit NHRA Driver Tim Wilkerson
pntv.us/pn_pt_16905_600b55205...
Summit Racing
ATI Balancer
pntv.us/pn_pt_16898_600b51f46...
Summit Racing
Comp Cams Camshaft
pntv.us/pn_pt_16893_600b51419...
Summit Racing
Comp Cams Retro Fit Hydraulic Roller Lifters
pntv.us/pn_pt_16900_600b532ac...
Summit Racing
Comp Cams Timing Set
pntv.us/pn_pt_16894_600b512ad...
Summit Racing
Harland Sharp Heavy Duty Shaft Rocker Assembly
pntv.us/pn_pt_16904_601b02cf1...
Summit Racing
MAHLE PowerPak Pistons
pntv.us/pn_pt_16895_600b5172e...
Summit Racing
Milodon Oil Pickups
pntv.us/pn_pt_16897_600b51d84...
Summit Racing
Milodon Windage Tray
pntv.us/pn_pt_16896_600b51bbb...
Summit Racing
Permatex Right Stuff Gasket Maker
pntv.us/pn_pt_16901_600b53625...
Summit Racing
SeaFoam Motor Treatment
pntv.us/pn_pt_16892_600b50dc4...
Summit Racing
Trend Performance Pushrods
pntv.us/pn_pt_16903_600b54338...
Summit Racing
Trick flow Power Port 175 Cylinder Heads
pntv.us/pn_pt_16899_600b559d9...
Summit Racing
Trick Flow Track Heat Intake Manifold
pntv.us/pn_pt_16902_600b53b75...
ARP
Fasteners
Matco Tools
MATCO Tools are the Official Tool Supplier to PowerNation
The Industrial Depot
Tools, Hardware, Shop Supplies
Trick Flow Specialties
R-Series Dual Four-Barrel Tunnel Wedge Intake
@jooch_exe 3 жыл бұрын
"A real diamond in the rough" "During inspection, we found several cracks in the block" LOL
@RIPPERTON 3 жыл бұрын
huge waste of SeaFoam
@9Apilot 3 жыл бұрын
I would have been more impressed if they had repaired the block.
@paulbrancato8262 3 жыл бұрын
@@Andy-lu4nd The valley cover and timing chain cover? Maybe.
@megsmith596 3 жыл бұрын
@@9Apilot You have to watch Cuban TV they would have repaired it.
@9Apilot 3 жыл бұрын
@@megsmith596 I thought they just used a Russian tractor engine instead.
@edwardmyers1746 3 жыл бұрын
That ARP cabinet is probably worth more then both my cars.....
@menom7 3 жыл бұрын
Probably??? Lol. I'd venture to say your 100% correct on that one Edward!!! ;-)
@Cheezeball99999 3 жыл бұрын
No joke. I kind of want one 🤣 Though if it's anything like Fastenal at work, they bring you the cabinet for free (or a small fee) and check up once in a while to charge for what you've used. So it's not an all up-front thing. I hope.
@elboxoluncho 3 жыл бұрын
Probably worth more than all my cars. Haha
@2006gtobob 3 жыл бұрын
The bolts and nuts are worth more than my cars.
@edwardmyers1746 3 жыл бұрын
@@Cheezeball99999 id love one 🤣 every oem fastern would be gone in my engine bay, nothing but arp if I could. Just for the stainless bolts
@adamstampley7207 3 жыл бұрын
This is classic engine building.😂 "We started with a junkyard engine and before you knew it, we're $20k deep in a full custom."😂😂
@danielmarek4609 Жыл бұрын
I am building up a new engine for my 69 Mustang S-code. I recall watching this video a year back. I started by taking in the bare block to the local speed shop to have the block cleaned, magnafluxed and inspected. I knew the engine had come out of a 66 T-Bird and had never been rebuilt, it had factory bores still. Now we're in the process of securing all the parts to build it into a 445 FE. Only the block, main caps, and front timing cover are going to be original, the rest will be all new.
@ihateurmom 3 жыл бұрын
The theme of this show: "We're going to take a junkyard engine, start it up once, and then replace every single part including the block."
@Sherman62 3 жыл бұрын
Pay attention. This is how you get a new engine past the wife. "Did you buy a whole new engine"? "Nah baby, just a few parts".
@johnawesome3191 3 жыл бұрын
It definitely teaches you the truth about what could happen with a junkyard engine. I’m glad they showed how they found those cracks
@Cheezn4urdreams 3 жыл бұрын
LMFAO..
@davidhill850 3 жыл бұрын
@@Sherman62 Its also well established in my house that all the parts come from Ebay, and everything on Ebay is $20
@SAVikingSA 3 жыл бұрын
@@davidhill850 I run nitro R/C cars and it's the same but Amazon. I rebuilt a Traxxas Slash with anodized everything and every part was from Amazon and they all cost $20. R/C parts are even more believable at that price even though the cost against weight of what you're getting is even worse than car parts.
@davidfultz3594 2 жыл бұрын
At the beginning the engine was said to come out of a dump truck. If I'm not mistaken, that would be an FT. Those had steel cranks and they probably tossed it. Also the blocks were beefier, had more meat around the cylinders.
@dustinshadle732 10 ай бұрын
They would have had a "391", but I love pulling those out and turning the crank to fit high rpm engines. Once in a while I'll find a truck or bus worth saving, like a 4x4 bus in Wyoming. Those cranks aren't just steel, but forged steel
@godsowndrunk1118 10 ай бұрын
@@dustinshadle732Could be 361, couldn't it?
@jameskohler7724 9 ай бұрын
That is the best cheapest way to get a 427 forged crank. Take a 391FT crank and turn the shaft down
@lesterscrugs2272 3 жыл бұрын
The combustion chamber is heart-shaped? Well I don't know if my lady will like these for Valentine's Day but I guess I know what I'm buying her
@RaddestDad 3 жыл бұрын
Great noise and easy to start no matter the weather or temperature. What a great motor for a daily driver.
@craigengelman4534 3 жыл бұрын
to bad theres over 10k in parts and machine work
@falconater68 3 жыл бұрын
@@bigboreracing356 Sweet brag bro...A more accurate comparison would be a built 409 wouldn't it? Hey I bet topfuel cars sound pretty good too.
@spar8334 3 жыл бұрын
@@bigboreracing356 you not tryna pull up on my stock 302 with the new plugs and fuel filter
@spar8334 3 жыл бұрын
@@bigboreracing356 it not a coyote and you need tires for traction. Not me tho i spin and win
@BuddWolf Жыл бұрын
I had a 390 in my 71’ F-250 4wd. I stayed calm by putting headers, an Edelbrock intake and a 750 Holley dbl pumper. Couldn’t tell you how much power it made, but the upgrades really woke up that old motor. Thanks👍🏼 for sharing the video post. Best of luck 🍀to both of you guys 🇺🇸🇺🇸🇺🇸
@noduh736 3 жыл бұрын
I like Pat's face he makes when hes flooring the throttle lol
@mikef.1000 2 жыл бұрын
"Just a good engine!" Doesn't get any better than that, well done guys!
@elm7666 3 жыл бұрын
I am building a 428 'C' scratch for my 76' Highboy and almost have everything needed to start reassembly, including 1963 427 cast iron headers. Thanks for showing some blue oval power.
@codysmtih8622 3 жыл бұрын
Pretty sweet, I'm rebuilding my 390 for my 76, and have had all the parts and blocked machined for the last 4 years and am just now putting my valve train on today
@jasonpoore7361 3 жыл бұрын
I just built my 390 and C6 for my 1975 f100 4x4. Absolutely in LOVE with my truck.
@buckykattguitar 3 жыл бұрын
Those 427 manifolds are a pretty rare piece! It took me months to find an original set with no cracks
@elm7666 3 жыл бұрын
@@buckykattguitar They are not cheap either! 38 lbs each but well built.
@karljay7473 3 жыл бұрын
Love the interest in the old FE block, I've built a few of them years ago. Impressive numbers from old iron and new tech. One SUPER cool thing about the FE is that you can mix and match things. The 360 becomes a 410 with a crank swap. Swap the intake and add headers and you've changed the engine for cheap.
@Bbbbad724 Жыл бұрын
Hey Karl, Bill Ballinger I am still enthusiastic about the interest in the FE too. I still love them too. I do wish someone would make 351C heads and intake to fit them. That would be really cool! I have thought about how nice it would be. A445 cross bolt 2 and 4 main, put studs in and new dowels. It would be neat to half fill it and then the 4V closed chamber heads at 4.63 bore spacing and a big burly intake in a 67-70 Mustang!
@karljay7473 Жыл бұрын
@@Bbbbad724 That name sounds familiar, were you a part of the old FE Forums back about 20 years ago? I was pretty active back then when I was building my truck FE.
@Bbbbad724 Жыл бұрын
@@karljay7473 The one and only. I m banned from them now for thinking that someone should make a 351C head at 4.63 bore spacing because it was the best head Ford ever made and I guess it pissed off all the guys hoarding CJ LR/MR/HR/TP heads. I just thought and even wrote a letter to Vic Edelbrock and Suggested that he should step up the FE with Cleveland at 4.63 and an intake way back before the Edelbrock heads came out. I guess he made the right choice, they are still their best sellers. I still wish he had taken my advice. The FE is a great design and it still makes great power from it’s design. The Cleveland head is the best OEM design. I really wished the two had been mixed. I fill blocks if I plan on 750 + using studs and crossbolted mains from Pro-Gram on 2 -4 with the stock thrust main. I have 3 that are still running on the street at 700 hp that I built 20 years ago. The FE heads are pretty good with the right work. But the Cleveland because of the cant and tilt are bolt them on and go if they had 4.63 bore spacing. Good to talk to you Karl! I hope your 410 truck is still going well!
@JoeSolo814 3 жыл бұрын
Would absolutely love to see you guys find an old 427 tunnel port, and do a nice solid build on it.
@aguyinnc2865 3 жыл бұрын
Love this video, great to see modern tech on a FE engine. Would love to see more Ford engine builds!
@Bbbbad724 2 жыл бұрын
Imagine if you had a thick 4.16 bore? 462 ci and weighs less than a Windsor. More tq and hp.
@aguyinnc2865 2 жыл бұрын
@@Bbbbad724 as long as it's a Ford engine I'm good with it.
@j.b.9895 3 жыл бұрын
How is this restoring a junkyard find, “a diamond in the rough”, when you replace everything including the block? Seams to me your just relocated it to a different junkyard
@reviewaccount469 3 жыл бұрын
But cleaner
@JohnDoe-pv2iu 3 жыл бұрын
I think they were going to use the block but replaced it because they found cracks. The Real find was the oil splash pan under the intake. They sandblasted it and reused it. The only part that came from Ford... Mighta been cheaper to have found a splash pan on Ebay to build! 🤣🤣🤣 Yall Take Care and be safe, John
@Mike-xt2ot 3 жыл бұрын
Like pulling a good radiator cap off a wasted car then driving under it a good car with a bad radiator cap and calling it restoring.
@JohnDoe-pv2iu 3 жыл бұрын
@@Mike-xt2ot I've told people 'the car ain't bad, jack the battery up and pull a new car under it'! Oh well folks need viewers to bring content. That don't happen with a busted block... Oh well, it is what it is... Yall Take Care and be safe, John
@xaenon 3 жыл бұрын
@ab0z Nice reference. I love it!
@csmall788 3 жыл бұрын
I’m staring at my grandpa’s 352 FE out of his 66 F100. It will be my first engine build. I’m dying to get his truck back on the road. This gives me inspiration. I’m certainly not going to go this wild, I’m just hoping to make 300hp, but this gets my mind racing.
@craigengelman4534 3 жыл бұрын
352 is a odd ball motor and for the cost to make 300 your better of to go to a 351w there cheap at the scrap yard make shure to get a rollor motor that way you dont have to pay for the upgrade
@Jsf445 3 жыл бұрын
@@craigengelman4534 then you have to change motor mounts, bell housing, accessory drives. What a pain if all you want is 300 hp. That 352 will do that just fine, and last forever doing it.
@chancezimmerman1390 3 жыл бұрын
Just some pointers on doing the 352 Most parts on the 352 are the same as the 390. Such as timing components. The 352 has the same block as the 390 so if you wanted to you could bore your 352 to a 390. If you are looking to get an easier shot at getting over 300 hp. It really would not be that much more to bore a 352 to a 390. If you are getting the cylinders honed by a machine shop. Also some stock parts for the 352 are getting hard to find. Such as the harmonic balancer and main cap bolts. However you could get aftermarket ones pretty easy. By the way the guy that said the 351w is just jealous that he doesn't have a 351 cleveland 😃
@trythinking6676 3 жыл бұрын
Ought to find a 360 FE. Bulletproof if built right.
@csmall788 3 жыл бұрын
@@trythinking6676 I actually just bought one to put in there while I take my time working on the old motor. It came out of a 74 F100, so I was able to drive it before it got pulled out to test it. It’s nothing special but it does have a comp 268 H cam, performer intake and 1406 Edelbrock carb. It sounds good, at least. Still working on the details to get it fully installed once this zero degree weather passes.
@DistractedChaos 3 жыл бұрын
These guys really taught me a lot and got me working on my old baby 1976 dodge 318 with all new cam, lifters, pushrods, aluminum intake, 600cfm 4 barrel
@randysrestoration 3 жыл бұрын
A few years ago I installed the dual quad FiTech on my 482 FE. Early version think max was 600 hp. It fired instantly but the more I drove it the worse it got. Flat out would not idle. At a Goodguys show FiTech tech tried to tune it. In the end I had wasted 5k trying to make it work. I had a NOS tunnel wedge. Finally threw it all in trash. Total junk, appears they made changes now. It ran fantastic with a pair of Holley carbs. My first and last experience with FiTech.
@toado696 3 жыл бұрын
Hey TimeWarp, I remember yours problems a long time back from the forum.
@randysrestoration 3 жыл бұрын
@@toado696 Things may have changed with fitech now but back then it was suckers like myself who had huge financial loss because of it! But I suppose if they send out a free unit people might tend to overlook what they really were. Garbage . .
@jamieschinkai1267 3 жыл бұрын
I’ve had similar experiences with fitech. The phone techs were friendly but we never got that truck running like it should. This was a 5.3 in a obs Chevy with the fitech ecu and harness.
@briang4470 3 жыл бұрын
A buddy of mine bought the base 300hp rated single 4 barrel FItech system when they first came out to put on his 302 ford. When we first put it on it was awesome, it started easy and ran great. But after about 1 month of use, the computer would loose memory and he would have to re write the whole tune or just pick one of the pre selected setting and just deal with it running crappy. It eventually got to the point where if he drove to the store, got out and came back 5 minutes later the whole tune would be gone and sometimes going down the road it would just shut off and loose memory or it would do weird things like idle at 2,000 rpm or idle at 500rpm, it was getting out of hand and since then I have had a grudge against FItech and I have read about many others dealing with the same problem, for all the time and money wasted on the FItech he could have just bought a brand new 650 double pumper and a jet kit and been done with it.
@jeredhayden1392 3 жыл бұрын
Had the same issue with my fitech. ran great for a couple years then one issue after another. Called fitech for tech support and they were basically useless.
@hdvictoryford5329 3 жыл бұрын
Love that you guys are doing more and more Ford engines. We watch every one, usually a couple of times. It is always nice to know what a set up will give you in hp and trq. Keep them coming.
@1957kwick 3 жыл бұрын
Nothing compares to an FEI love the way these motors sound. opposed to the new late-model engines they have a very distinct sound.
@WaybackTECH 3 жыл бұрын
I've been watching this show since it was Hot Rod TV with chuck and joe and the whole PowerBlock thing with the delicious Courtney Hansen hosting.
@stevewheat9030 3 жыл бұрын
Yes, bring back Courtney 👸
@charlespayne1909 3 жыл бұрын
I ve been watching this since 2004
@K-Effect 3 жыл бұрын
She doesn't need to talk, she just needs to look busy
@spudsmarauder 3 жыл бұрын
Oh heck should have left that cool cast aluminum timing cover raw.
@wuznar 3 жыл бұрын
I love the addition of the FiTech fuel injection! I know they cost more than carbs but other than cost, everything else is an advantage over carbs. Well done!!!!
@sorryociffer 3 жыл бұрын
LOVE seeing the lesser seen/known engines built up...built a 352 next!
@lorenzomaximo1818 3 жыл бұрын
I can’t remember where I saw it but I saw someone do it 352 Stroker build up Attained 595 hp. That’s good for 352 stroker motor. FEs are no joke.
@sorryociffer 3 жыл бұрын
@@lorenzomaximo1818 That’s awesome. Love seeing the oddball engines, regardless of brand...
@lawrencemick1665 Жыл бұрын
This is a 352 block
@BrandonCorby-wr5nd 3 жыл бұрын
I feel like I just watch this now to watch Pat lay silicone beads.
@GIGABACHI 3 жыл бұрын
🤣👍
@Harleybobber 2 жыл бұрын
Pat is knowledgeable. He has a flair of his own and he is awesome!
@matthewcritchfield6997 3 жыл бұрын
Where has Mike gone? Think it’s pretty crappy that someone’s on the show for that long and it’s such a good guy and just disappears without a word
@rlikemoney 3 жыл бұрын
I was wondering where mike was at too. Hopefully hes alright
@Carlos.Rivera 3 жыл бұрын
May ask why people ask about Mike?
@matthewcritchfield6997 3 жыл бұрын
@@Carlos.Rivera Mike was a great guy that was part of the horsepower show for probably near 10 years and all of a sudden now he’s just gone with no information
@michaelwhitehead4446 3 жыл бұрын
@@TimothySchulting LT was a crybaby no big loss there, but Mike was great. Hope he is doing well, where ever he may be.
@BobbyOfEarth 3 жыл бұрын
Man that's one sweet running old school Ford engine. Interesting factoid.. @3:00 Pat didn't mention that the other block he's using is a Ford High Performance 352 FE block. These Hi-Po 352 engines made 360 hp @6000 rpm from the factory w/4.050" bore and 3.500" stroke ..accounting for the high rpm.
@mikeraftis6332 2 жыл бұрын
4.05 x 3.5 = 360 cu in
@ardennielsen3761 3 жыл бұрын
it is normal to put a bolt in the water jacket, without it... when the farmer fills it up with lagoon water, the zinc oxidizes into a powder saving the block and also plugging any small leaks.
@yam9635 2 жыл бұрын
Mixing old engines with modern telemetry is just magic.
@meanmark8756 3 жыл бұрын
Awesome! I wish I could have you guys turn my 390 into that for my ‘65 TBird!
@williamcharles9480 3 жыл бұрын
That Ford FE design engine is a LeMans winner back in the late 1960s, you can't deny the design's durability and power capability.
@Charlie_Prinz 3 жыл бұрын
FEs are great! Awesome Episode !
@rickdemorgan8951 3 жыл бұрын
I have a 416 fe with iron heads that made 581hp at 6700, 540 to at 5100 , assembled by Somer's Racing, single 4v police intake. :))
@43mackmobile 2 жыл бұрын
Every engine I've ever rebuilt I would stand them on their back and drive the cam bearings in and install the cam the same way which helps eliminate scaring the cam bearings and gives your wrists a break.
@king0cans 3 жыл бұрын
I need a ARP cabinet
@johnparrish9215 3 жыл бұрын
That has got to be expensive.
@king0cans 3 жыл бұрын
@@johnparrish9215 For them it was free. ARP could hook a brother up.
@Nikdabruh 3 жыл бұрын
2500$ On summit
@kaybell1724 3 жыл бұрын
Great combo! I would like to see it on a 460 with around 500 inches with D20E-AB PI heads.
@michaeldinkens5083 Жыл бұрын
Hey Guys, I’m in love with what you did to this 390 FE engine. I had a 390 FE built to original specs but now want more horsepower and look for my 64 Tbird Convertible. Can you refer me to an engine builder in Michigan that is just as capable as the two of you? And what could would I expect to be the cost for parts, paint, and labor? Your reply and expertise are greatly appreciated. Mr. Mike.
@palanthis 3 жыл бұрын
We found a junkyard engine and then rebuilt it. We used a new block, crank, pistons, rings, connecting rods, oil pan, windage tray, oil pump, pickup, camshaft, pushrods, lifters, valves, springs, heads, gaskets, timing set, intake manifold. distributor, cables, plugs, studs, and bolts. Viola! Completely "restored".
@Bdady74 3 жыл бұрын
Great video, great motor and, you guys compliment each other well as presenters. Awesome episode thanks for posting!
@sorryociffer 3 жыл бұрын
Digging that FITECH system! I know nothing about tuning and the easy set up and self-learning is freaking sweet!
@brettspaulding5855 3 жыл бұрын
CMD number three is the best assembly lubricant I have ever used. I'm glad to see you guys using it. I have found that I get significantly better torque readings and it sticks better than other assembly lubricants.
@hotwort 3 жыл бұрын
Love seeing and FE build, my all time favorite engines!
@Cobra428SCJ 8 ай бұрын
The hydraulic roller cam they picked (254/262 with .670 lift) is a popular BBC drag cam. Its advertised duration is 298/316. The three top solid lifter cams from Ford were: C3AZ-6250-AA 306/306 , .500" lift @ valve, 78° overlap C4AE-B 324/324, .500" lift @ valve, 112° overlap C8AX-D 330/330, .600" lift @ valve, 116° overlap 273 deg @ 0.050"
@titanary68 2 жыл бұрын
I’m building a 445FE stroker and I would love to see you guys fabricate a sheet metal intake for EFI and set it up to run a ProCharger.
@jesusisalive3227 3 жыл бұрын
I was hoping you were going to paint that FE gold. They look really classy in gold.
@clevelandmaker386 3 жыл бұрын
they could have painted that block blue!
@jasonpoore7361 3 жыл бұрын
I painted my 390 old school ford blue. Lol
@wendlormsby 3 жыл бұрын
What do you expect from a couple of Chebby guys?
@briansearles4473 2 жыл бұрын
I thought it looked good with the black paint, nice valve covers too. I have seen several early 60's FE's where the block was black and the valve covers were painted flat gold.
@yam9635 2 жыл бұрын
This and donut media give me the right dose of entertainment and info. Other content auto and non auto alike just seem too overdone and ingenuine. These 2 channels just pump out that content you want. Glad to have caught them both at their peak.
@carltrano1325 3 жыл бұрын
I love love love 390 fe power 👍
@edwardkennedy2031 3 жыл бұрын
Where's Mike?
@blkmustang007 3 жыл бұрын
Congrats on OVER 850k subs guys !!!! GREAT content !!! Im building a Ford 460 nitrous addict engine right now...shooting for 500whp in a 95 mustang gt 5 speed
@RegulerShowTV 2 жыл бұрын
shouldn’t be too hard with a 460 lol, how did it go?
@rickstorm4198 2 жыл бұрын
Should just build the 460 to 552 c.i. skip the nitrous. 900hp easy sith good heads and intake
@1951RKP 8 ай бұрын
We drag race the Ford FE way back in the early 70’s. No one made any aftermarket stuff back then. You could get a aluminum intake but it wasn’t a better design that the cast iron it was just a lot lighter. We ran a 447 CI which was the standard 427 4.230 bore with a 428 crank which was 3.98. TRW made the pistons so it was a budget way to gain some cubic inches. Comp solid roller. Single Holley 850 with stock Ford Tunnel Port heads. It probably made about the same power as this combo. I would love to had the aftermarket pieces you guys had here to see what kind of power. With a standard bore 427 with the 4 1/4” stroke crank you guys used here it would be a 478 CI.
@carsontaylor7530 3 жыл бұрын
Love it im rebuilding a 390 fe for my 76 ford stepside so this was neat.
@sdscott42 3 жыл бұрын
Love the show. I have been watching the FE series intently since I am building one for my Tbird. What is the metric for drivability? Dyno data seems based on WOT, I would like to see all your projects put in a car and road tested. Keep up the good content!
@theerinnaidu4590 3 жыл бұрын
I always enjoy your videos. Keep it up
@shauncummings8606 3 жыл бұрын
Where's Mike Galley gone ?.
@danielchase4193 3 жыл бұрын
The only problem with fix or repair daily they cost three times as much as an LS or small block even a big block
@randysrestoration 3 жыл бұрын
Cool build though! TFS seems to be at top of food chain for FE heads at the moment. How about swapping a set of Jay Browns FE heads on next? That would be a interesting swap.
@andydufresne3635 3 жыл бұрын
So....you basically found a junkyard 390, got it running cleaned it up and chucked it (and the heads). Found a new block, and some aluminum heads...
@torpedo35 3 жыл бұрын
Basically a new engine with a used block but nothing else. Boring and expensive.
@ibast1 3 жыл бұрын
Don't forget he new crank, pistons and rods, but other than that it's the same junkyard engine. Well push-rods, rockers, distributor and manifold too, but otherwise . . . .
@micowikstrom7182 Жыл бұрын
One or two EFI's - the same power but only double the cost. That's called a 200% success!
@terrybaptist795 3 жыл бұрын
I would have loved to see them crack the magical 600 horsepower number with this engine.
@oldmusher 2 жыл бұрын
I love when people who won't spend 20 minutes setting up a Holley Carb take all week, two laptops and a chassis dyno to get fuel injection to work and then say the buzzwords "drivability" and "Throttle response", tossing in an "easy to tune." Sorry, I like the extra power of a carburetor. I get GREAT throttle response. I don't want to give up cam to have enough vacuum to make the EFI work, (also do stick shifts for the same reason), I can set up a properly sized carb in MINUTES with my little box of jets, power valves, and accelerator pump cams, and beat EFI on the dyno.
@oldmusher 2 жыл бұрын
4 more horsepower. Now...honestly compare COST. Pretty sure I could add an extra carb, too...and go over 600.
@rhostatton8944 3 жыл бұрын
long live the Ford FE engine & Power Nation!!
@rethrojeacher8464 2 жыл бұрын
I have a 445 going in my 55 Fairlane in a few weeks, I'm pretty stoked.
@johnnymcquinn6025 2 жыл бұрын
Great show, glad you are doing engine's like the Ford FE series. But can't help thinking the price to HP output. You used top shelf parts, even fuel injection didn't seem to add as much as I thought it would. Sure it's easier, don't have to mess with it...but wasn't that the pride and fun? Yep, first time, old, enjoyed your show!
@stanmack1 3 жыл бұрын
17:15 is that a loose damper bolt? i saw the washer move.
@dominatebawz 3 жыл бұрын
Agreed
@Hammerback972 3 жыл бұрын
Good eye. I went back and watched it and it does move quiet a bit
@blkmustang007 3 жыл бұрын
That bolt in the coolant passage HAHAHAHAHAHHA
@michaelreardon7667 2 жыл бұрын
Really cool build, love those FE's
@paulplack490 3 жыл бұрын
That dual-quad EFI setup looks to be about a $3.5k package. I'd hope for more than a 4 HP gain. Hopefully it will do some more self-learning. Cool to see a 352 FE block taken out to that displacement!
@Skyhawks1979 3 жыл бұрын
I believe all 352/360/390/406 and 428 blocks had "352" stamped into the casting.
@Jimmysidecarr 3 жыл бұрын
On a street engine like this, how about some dyno pulls from down around 2500 to 3000? I would love to see how low this engine still makes at least 500 ft/lbs of torque. Stop light to stop light, generous torque makes a performance vehicle that much more fun to drive. Great video! Great series! I used to be a Ford/Lincoln/Mercury parts guy from 1970 to 2009, so I grew up around and loved the FE Ford Big blocks.
@Skyhawks1979 3 жыл бұрын
Exactly. Torque for street fun!
@ThomasShelby-uq8cz 3 жыл бұрын
Those little 175cc intake runners and 70cc heads are holding this engine back. If it had 220cc+ and 64cc it would be in the high 600s or low 700hp range
@menom7 3 жыл бұрын
Anyone ELSE want MIKE back on here!?!? I SURE DO!!! sniff-sniff
@Magnacharger07 3 жыл бұрын
What happened to Mike???
@mattbuchanan2580 3 жыл бұрын
MIKE!!!!
@menom7 3 жыл бұрын
@@Magnacharger07 Wish I had the answer to that one My Friend,as I searched and searched the internet for a legitimate answer,but NOBODY'S talking about it,or mentioning anything about Why Mike Left the show!!! Damn SHAME TOO,because I'd SO MUCH RATHER watch HIM do the work,than Pat or anyone ELSE on that show! I Love Pat's knowledge on things,but he's got a really weird sense of humor and takes things too literally sometimes. MIKE however,was VERY Matter-of-fact with the audience and doesn't bullshit when working on a project! LOVED THAT! If anyone KNOWS what happened to him,please post it here! Thanks! :-)
3 жыл бұрын
BEST SHOW "EVER"! thank u for all da amazing content you guys bring. 👌🏾💯
@Thelongmanable 3 жыл бұрын
*_The ok symbol you put on the end of your post "ACCORDING TO THE FBI" is a white supremacy symbol.. As a white guy I was corrected on this and thought you needed to know lol 😆..._*
@Thelongmanable 3 жыл бұрын
@ *_We can't have nothing in this world because it's all politically incorrect..._*
@billflk2364 3 жыл бұрын
The driver is on fire, lmao, and he was not joking
@chloehennessey6813 3 жыл бұрын
Who the eff is that? Where’s mike!
@martingatavaski1351 3 жыл бұрын
Just said same thing!
@charlespayne1909 3 жыл бұрын
Mike tell them to let you out of that abandoned dyno room
@harryrenner4016 3 жыл бұрын
I'm curious what the final price tag is on that FE engine. after building a half dozen of them I can tell you that the parts for those engine's are expensive. especially when compared to other engine's. something that they didn't mention in this project. is that a person has to install the distributor before they tighten the intake manifold bolts. otherwise they won't be able to install the distributor. since the distributor goes through the intake manifold and the machined area in the block that has to match up. just something that somebody who intends to build one of these engine's should know. along with the different way the rear main seal should be installed. because of these engine's being Y block engine's. that was amazing those dyno numbers showing only a twenty digit difference between the H. P. and the torque that's amazing no doubt.
@darrylnicholson1387 3 жыл бұрын
Anybody else catch that crescent wrench move? Stop right there son ( turn it around) now proceed!!!
@Mike-xt2ot 3 жыл бұрын
Gotta love it when you see a Ford guy get so excited about 400 or 500 horsepower.
@petercermak4095 10 ай бұрын
I have installed a FiTech 38351 system on my Blueprint 427sb engine as the 1987 OBD1 couldn't be used anymore. I have been very happy with it and I wanted to see how much the FiTech system would add over the Blueprint carburetor system used for the base HP numbers from their factory. I was hoping that the fuel injection system would add more. This vid gives me an idea of how much more I can expect. Thanks guys.
@231mac 3 жыл бұрын
Ahhhh, the ol' now you see a junkyard engine, now you don't switch, huh? Classic Powernation...
@samdavis2956 Жыл бұрын
I would like to see the horse power/torque comparison between 2 carbs vs 2 F.I. units.
@davidhughes4728 2 жыл бұрын
I love this video keep up the good work man this is my favorite video
@scraech 3 жыл бұрын
@ 17:18 you can see there is a loose bolt and washer spinning on the crank balancer.
@davidhughes4728 2 жыл бұрын
I love the way you built any engine badass
@007galaxie 3 жыл бұрын
Awesome video guys, thanks for sharing. I have a 67 Galaxie 500 Convertible that I'm starting to restore. I think I know which motor I want now :)
@eb972 3 жыл бұрын
We run 5.90’s on a single Fitech 1200. Turbo and e85. Just ordered an IRD carb.
@ForYeshua1 3 жыл бұрын
So with this dual quad setup, it lost 2HP and 5TQ...
@danielhultenius5506 3 жыл бұрын
And alot of money
@LionWithTheLamb 3 жыл бұрын
Dual Quad almost always only gains attention at the car shows.
@777RocketS 3 жыл бұрын
Well thanks for saving me half a video! 🤣 But could you too off the dual setup with a blower?
@RNA0ROGER 3 жыл бұрын
Better spark control linked with efi would help
@davidbell7091 3 жыл бұрын
I remember when pro stockers went efi and greg anderson didn't want to, for a good reason..
@RestorationObsession 3 жыл бұрын
Nice job. I really like those valve covers
@TheRoguelement 2 жыл бұрын
Mr Topolinski even though is clearly a pretty good engine numbers man and a engine specs guru he is still after all a technogeek with over full chest pockets pocket protector and note pad and 50 writing implements plus his glasses ..Wow Pat your our hero.
@PatrickScottlxw 3 жыл бұрын
Super clean foam spray works great on blocks
@fenatic7484 2 жыл бұрын
The FE is a labor of love,a strong power j
@1mikewalsh 3 жыл бұрын
For removing aluminum intakes use hmdi plastic wedges and hammer...
@Bbbbad724 Жыл бұрын
Look at the power they got out of a NON-CRACKED 390 block. It is just as good to do this as a single 4V carburetor, it made the same amount of power as it did with the twin hoop-te-doo. I have accumulated most of these same aftermarket parts.
@MrCheckster2000 3 жыл бұрын
LOL....ARP cabinet? That's when you know that you have made it big time...haha
@bobdickerson6895 3 жыл бұрын
Wow that old fe sounds great.
@fambuild 3 жыл бұрын
Good stuff!
@BeefaloBart 3 жыл бұрын
Pat love ya just how you are, and Frankie your getting there bud.
@mishaklenncabo 3 жыл бұрын
Been watching the show and thank you
@RaddestDad 3 жыл бұрын
You should install EGTs and wide band O2s per exhaust port and compare each cylinder AFR and EGT. I know that there is plenty more efficiency on the table especially with that FI Tech kit. You can fatten up certain injection pulses to correct a cylinder.
Modern 410ci Stroker Windsor with Custom EFI & Coil-Near-Plug Conversion - Engine Power S9, E14 & 15
POWERNATION
Рет қаралды 522 М.
Fabiosa Best Lifehacks
Рет қаралды 36 МЛН
ISSEI / いっせい
Рет қаралды 41 МЛН
Hagerty
Рет қаралды 1,6 МЛН
The Horsepower Monster
Рет қаралды 460 М.
POWERNATION
Рет қаралды 1 МЛН
POWERNATION
Рет қаралды 446 М.
driving 4 answers
Рет қаралды 250 М.
vazovskie.official
Рет қаралды 511 М.