JUST HAVING FUN 🤘Tekno ET48 2.0 Traxxas Maxx V2

Рет қаралды 1,513

11 ай бұрын

TEKNO ET48 2.0= M2c chassis, towers, rear chassis brace, CVD's, shock caps and pistons Watch after the run I go over in detail what's on the truck
TRAXXAS MAXX V2= M2c chasse brace/bash bar. steel CVD's Vitavon hubs front and rear again, after the run, I go over what's on the truck
AS ALWAYS, THANKS FOR WATCHING IF YOU ENJOY CONTENT LIKE THIS CONSIDER SUBSCRIBING AND GIVE US A BIG THUMBS UP RINGING THAT BELL SHARE IF YOU DON'T MIND AND WE'LL CATCH YOU ON THE NEXT ONE✌️

Пікірлер: 43

@scannon3213 10 ай бұрын

Hey there buddy enjoy watching you fly with that beast or any Rc all that open space reminds me of Texas.😊

@AldoLoyal 10 ай бұрын

Thanks so much man. It definitely makes it fun to go out and bash whenever plenty of space.🚀🤘😎

@rckiduk9439 11 ай бұрын

Yes my mt410 was doing the same thing on the ball cup another washer and you will be good to go,just minor problems but annoying to keep fixing it while out bashing 👍

@AldoLoyal 11 ай бұрын

Yeah I hear ya it’s definitely annoying. The car handles awesome. It’s just all the little stupid things but once I get it all sorted it’ll be an awesome car. I’m sure of it.

@rcsmith5909 11 ай бұрын

The techno did get some smooth jumps at times. Got to build little baby jumps for the baby 😂😂👍🏼

@AldoLoyal 11 ай бұрын

Thanks man in all fairness, I don’t have the Tekno set up properly for my style of bashing. I really need to have aluminum bulkheads and then I think that truck would be just as good as anything else.

@jd111949 11 ай бұрын

Man dont apologize or worry about offending ppl be yourself and do you .Way to many soft ppl now days and apologizing to the soft ppl just makes them complain and expect u to continually worry about them and their feeling! Hell of a video good luck on getting ur techno straightened out to where ur happy with it!

@AldoLoyal 11 ай бұрын

Thanks man I hear ya I shouldn’t be apologizing to nobody if they get their damn feelings hurt. It is what it is. I was just having bad luck with the Maxx and felt like being an ass the tekno I just don’t have properly set up for my style of bashing, but I’ll get it there, that was just a fun day goofing around. I did like the tekno I just need to get it properly set up maybe some aluminum bulkheads and washer up those links so they don’t keep popping off. Appreciate your time, my friend and happy bashing.🚀💪🤣👊👊

@m2cracing168 11 ай бұрын

Awesome bash, the little trucks are tons of fun too!!!

@AldoLoyal 11 ай бұрын

Thank ya yep the little trucks are definitely fun from time to time. It’s nice just to get out and rip around and enjoy the hobby thanks for all you do for are hobby

@johnnyhaberfield721 11 ай бұрын

Tech Not? Maybe indoor carpet buggy racing whilst wearing slippers .Mines been on the top shelf since I made it into a basher.No Pumas allowed on carpet tracks too.😊✌️

@AldoLoyal 11 ай бұрын

I’m not gonna give up on that Tekno I just need to get some aluminum Bulkhead’s and fasten a few things down a little better and I’ll give it another shot. The Maxx can kiss my ass. I gave that joker to my son and he’s having a ball with it. It is a tough truck. Just a clumsy, tough truck And don’t be hating on my pumas brother😂🤘😎👊👊

@johnnyhaberfield721 11 ай бұрын

@@AldoLoyal I'm loving the Pumas Aldo.I often get more worried about ya footware than ya rigs when you climb in the meat pit ditch .The Max is a Clumsy toy .The new Kraton ,no matter what I have done .It's Not good at steering .The whole steering assembly is straight out the smaller V1 4s.Cant get the hack it man angle.Yet I have ripped it ,street hooning,,bashing and parking attendant hunting .Chassis would have not survived without the M2C bash bar,and we all know how hard those parking attendants are.Just bought a new coffee machine.Can ya tell.✌️

@AldoLoyal 11 ай бұрын

@@johnnyhaberfield721 you’re a trip man I just downed two coffees myself

@scottssrrc1900 11 ай бұрын

Awesome bash brother. Im with you on the 2.0 i don't own one have friends that do, not a fan. I bought a mt 410 kit, et48.3 mtc chassis shock towers and rear driveshaft, bitch is a beast, for what ever reason that old style truggy blows that new 2.0 version away in every aspect. Keep the videos comin brother cant get enough of the beatdowns

@AldoLoyal 11 ай бұрын

Thank you so much this car definitely isn’t as strong as the 48.3 I have one of those as well. My biggest issue with these cars are the rear bulkhead I need to go to aluminum and then I think the problem will be solved then they will be Grate Bashers.

@bigaltough 11 ай бұрын

That tekno aint Aldo tough is it lol 😂😂😂 poor max took some 💩 from u today lol

@AldoLoyal 11 ай бұрын

Thanks Big Al. I will get those teknos straightened out. I love the handling of them. Super smooth and plush. The Maxx can kiss my ass. It’s now my son’s truck.

@GreatLakesRC 11 ай бұрын

Dam, rough bash Aldo! The 48.3 version of the Tekno is better for bashing IMO. M2C makes more bracing for it 😂

@AldoLoyal 11 ай бұрын

Thanks man at that time when I ran that car it was last winter but now I do have a 48.3 completely built up along with an MT 410 but those are both in shambles at the moment with broken rear bulkheads.😂 I have no clue why

@Dos_Rc 11 ай бұрын

If your running a steel spur it’s always going to sound horrible, I had the same problem no matter what pinion brand I used, finally I decided to use the plastic spur and now it doesn’t sound like a dying cat.! 😂 figured if plastic spur strips ik just replace it been holding fine so far

@AldoLoyal 11 ай бұрын

Yeah, I’m just not used to that with the arrma cars but I think my alignments not right but it’s all good. I heard those plastic spurs hold up pretty good I’m just not willing to try them yet.

@Dos_Rc 11 ай бұрын

@@AldoLoyal keep trying the steel spur hopefully it works for you, keep bashing brother I do love your videos especially when you go over the Rc at the end idk why but I love seeing peoples builds and upgraded parts and your rcs are pretty cool

@AldoLoyal 11 ай бұрын

@@Dos_Rc thanks man that’s why I do it. I love to see other peoples builds

@TheSpeedrunRookie 11 ай бұрын

🤙🏽

@AldoLoyal 11 ай бұрын

Thanks🚀🤘😎

@omega_rc 11 ай бұрын

My biggest problems with myTeknos are that same rod end popping off after big jumps, I solved that with some flanged nuts to keep the rod from popping off, then the plastic bulkheads SUCKED , so got the alum All Racing ones with metal diff cups all around solved all diff issues, steel spur is a must, and smothering the bolts with red loktite after setting the mesh is also a must cause the mount comes loose pretty easily. lastly the arms always ripping off on the bulkhead side where the hinge pins go through so I drilled the holes bigger and added the same washer? thingies that go on the other side of the arm (wheel side) these are some subtle tricky upgrades but after these it's def become my favorite rig.

@AldoLoyal 11 ай бұрын

Thanks brother for that info I was planning on ordering some aluminum Bulkhead’s eventually but with all these other projects going on those cars end up last but they’ll definitely get upgraded some more. I really enjoy my MT 410 but again that little joker got bulkhead issues at the moment, I have three teknos two of them are down with broken bulkheads. Appreciate your time brother happy bashing.🤘😎

@omega_rc 11 ай бұрын

@@AldoLoyal yea, I have too many projects to handle atm as well. But I hope you find your golden point with them Teknos, definitely fun after much frustration 🤣

@pizzomedia7261 4 ай бұрын

Awesome video man! Do you have any experience with the Tekno MT410? I was thinking about getting one of those kits. The 2.0 version. Thanks

@AldoLoyal 4 ай бұрын

A little bit but not much I built 2 MT410s one of them I kept it as a 410 the other one I turned it in to the extended 48.3 with the M2c kit but I already had so much money into them, and I kept breaking rear bulkheads on hard landings I just gave up, you put a nice set of aluminum bulkheads in there and you’d be golden. I just didn’t want to put any more money into them

@pizzomedia7261 4 ай бұрын

@@AldoLoyal ⁠ cool. Yeah I have a Kraton 1/8 EXB v1, so I'd probably get a 1/10 Tekno. Mainly wanted to know how durable they are. Hopefully a bit better than a stock Kraton. Thanks!

@AldoLoyal 4 ай бұрын

@@pizzomedia7261 I would say no on that one but that’s my experience with them

@rctd3260 11 ай бұрын

Are you gonna get the new RTR EXB 8s Kraton/Outcast?

@AldoLoyal 11 ай бұрын

No, I don’t think so. my outcast is set up that way now. The only thing that would be different is the tires and the body

@user-is8ri6pt9v 10 ай бұрын

Buy yourself an arrma outcast 6s or 8s.. i run the whole arrma line up now.. fuck those. I have had 3..

@AldoLoyal 10 ай бұрын

I was just wanting to try them I have every arrma in my feet check my channel out and I run them all frequently.

@Havingoneofthosedays- 11 ай бұрын

How’d you get that max 8 to fit without rubbing wires on the driveline? Did you do a custom esc tray? Tekno looks good. I’ve got one in the bench figuring out esc location

@AldoLoyal 11 ай бұрын

It’s an M2c chassis and I’m using a allracing ESC and servo mount all together it’s very tight but it works

@Havingoneofthosedays- 11 ай бұрын

@@AldoLoyal thanks so much.