Creality CR Touch - Auto Bed Leveling Kit

Creality CR Touch - Auto Bed Leveling Kit - Ender 3 V2

Рет қаралды 193,402

2 жыл бұрын

Amazon Links
Buy it here: geni.us/9nGmb
Recommended: geni.us/JustVlads
www.crealitycloud.com/softwar...
Stripes stl: thingiverse.com/thing:5174552
Creality CR Touch Auto Bed Leveling Sensor Kit. Creality Official Specially Designed for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5pro/CR10 for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer
Easy to Install and Use
The kit contains 3 different mounting brackets and extension cords. You can easily install
Product Durability
Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable quality, long service life, and can be reused more than 100,000 times.
Creality ideal companion
CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit motherboard.(3d printer accessory with the best experience)
Strong compatibility
CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads.com/

Пікірлер: 277

@JustVlads 2 жыл бұрын

New Channel: www.youtube.com/@Just_Print CR Touch: geni.us/9nGmb Recommended: geni.us/JustVlads

@TheChromePoet 2 жыл бұрын

Please tell me this, can't you just replace the springs with something solid now that you have automatic bed leveling. Doesn't make sense to use springs and risk the bed shifting over time.

@eventhorizon492 Жыл бұрын

Dude, I’ve been having problems with mine since install because all the tutorials wouldn’t explain what they were doing. Your a life-saver

@andrewhofmann5453 2 жыл бұрын

I just installed mine. I would recommend to viewers that you take the extra time to fish the data cable through the flexi-duct, it just adds that OEM feel.

@danielschmidt1990 2 жыл бұрын

Any good cable management just gets me off :P love it

@bobbylim1971 2 жыл бұрын

Yeah i did that. Was contemplating for 5 minutes if i should do that or not. End up doing it and it felt smart and clean. No regrets.

@mve9924 2 жыл бұрын

for the newbs....when you slide the duct back, it expands in size quite a bit

@couryrussell7653 2 жыл бұрын

I took your advice and definitely appreciate it!

@H31MU7 Жыл бұрын

I read this comment after cable tying on the outside it the whole way down to the board... ...yeah, it does look way better fed through the duct.

@burgertim7878 8 ай бұрын

My BL touch port had hot glue all over it, thanks Creality.

@joygibson6623 Жыл бұрын

I had to come back to level and fine tune my settings. Thank you! I appreciate you showing the whole process. It's seems all good now! Ty again and again!

@grasug8550 Жыл бұрын

My Ender 3 V2 Neo arrived yesterday - I've never used a 3D printer and oh boy are the instructions insufficient! First successful print I've managed to do is thanks to your advice, thanks very much, I appreciate it!!!!

@shamefulexistence 2 жыл бұрын

FYI: The firmware you selected is for adding the auto leveling sensor AND a filament runout sensor. (They make a filament runout sensor that will stop printing if your filament runs out so you can load filament and resume printing).

@summerofsteroids Жыл бұрын

@Jane Pimentel Did you ever figure this out?

@LowellBrillante 2 жыл бұрын

@Just Vlad thank you so much. Huge help. You got a great voice and tone for podcasting too

@wfs1965 Жыл бұрын

your instructions are detailed and thorough,. I used ur vid to build my first printer, the voxelab aquila, thnx ur the best. Glad I found this vid for my Ender 3 V2, a lot easier and more detailed than the others as well, thnx again!

@mtschutte18 2 жыл бұрын

Was thinking about it yesterday actually and I have an ender 3 V2, so it was perfect timing for this video, ended buying this auto leveler cause the others are plastic and I want the durability.

@user-rq6rx5cp7i 2 жыл бұрын

Спасибо, мужик! По видосу легче настраивать, чем по инструкции на крохотной бумажке из коробки :)

@stephenruvalcaba4680 2 жыл бұрын

so many step and so well explained!!!! thank you so much! even on my normal LCD monitor, i managed to get my cr touch to work! thanks a bunch!

@bgcm1995 Жыл бұрын

How'd you download the file? I have an HP and I keep getting a Adobe acrobat file and it won't download.

@GabiFodorrasRO 2 жыл бұрын

Din câte tutoriale am urmărit pe KZfaq acesta este cel mai explicit tutorial Multe salutări din România !

@KunaiMelee 7 ай бұрын

2 months trying to figure this out... you helped me so much friend. thank you! cheers!

@jasonlopez5064 2 жыл бұрын

Thanks dude! Just installed mine following this video!

@BavarianLord29 2 жыл бұрын

good job. Thanks to you I was able to install everything today!

@EldrinOS 2 жыл бұрын

Hey man, just wanted to say thanks for this one. Was having a hell of a time trying to figure out how to best configure my offset but this made it painless.

@bgcm1995 Жыл бұрын

How'd you download the file? I have an HP and I keep getting a Adobe acrobat file and it won't download

@edsonx2001 2 жыл бұрын

Thank you! This is a good resource for cr-touch leveling 👍

@santiagodamasco Жыл бұрын

Thank you!!!! Finally a good and easy explanation of the process.

@bgcm1995 Жыл бұрын

Everyone please remember that once you open the bottom part, to check your main board number since you need afterwards to install the firmware!!!! I put everything together, took the bottom off to connect the wire and now have to take it off again to check the main board number.

@mcdouble_2475 2 жыл бұрын

Love your videos they are so helpful. 👍👍 keep up the good work!

@tammykillian8134 Жыл бұрын

I’m having a heck of a time getting mine to level properly. Both with and without the CR Touch

@hufftechsolutions7903 Жыл бұрын

Make sure the wheels on the bed are tight. If they aren't, you'll never get it level

@CCR30 2 жыл бұрын

Thank you very much for this. It helped me a lot.👍👍

@daurham Жыл бұрын

If you can't find your firmware version: You can find it on your motherboard, when you open it up. Mine said "4.2.2" just under the creality logo, near the center. ( Ender 3 Pro )

@Kimberlysocialmgmt Жыл бұрын

This video helped me figure it out after hoursssss 😅 thank you! I just had issues finding the download page but finally got to where he was at. Only issue was when I put in printer it was in Chinese 🥴

@pianoplayer1224. 9 ай бұрын

Please can you send me the link to the page and which download u used? Thanks

@lpzshaun Жыл бұрын

This video was extremely helpful thank you

@ginoantenucci6424 Жыл бұрын

Important note you have to remove the z limit switch as the cr touch acts like the z limit switch now also you should install the firmware that says just the bl touch not filament runout sensor

@miriamwong4200 Жыл бұрын

What happens if you don't remove it? I'm new to this and don't want to mess anything up

@ginoantenucci6424 Жыл бұрын

@@miriamwong4200 according to the manual it says it won’t destroy your machine but It is recommended what happens is that you unplug the z limit switch so it would make sense to remove it if you don’t it has an unlikely chance to try to move the z down and the z switch is stoping it by force which is not good for your stepper motors and since the z switch is unplugged it won’t stop the z gantry

@SpikeCooks Жыл бұрын

Hiya, hoping you could answer my question as your reply seems to be kinda what I'm looking for. I feel like I'm having lots of trouble manually adjusting the z height to get the best print, if I got this product, would that mean I wouldn't need to fiddle around with the cogs below the bed to adjust the height?

@ginoantenucci6424 Жыл бұрын

@@SpikeCooks no you would still have to do the same fiddling just after your done fiddling you won’t have to manually level a lot the you can just use the automatic level and that should avoid manually leveling for a good amount of time but note that once in a blue moon you should re level your bed manually to make sure you get the best quality prints (I manually leveled it 6 months ago and it is still leveled good I normally auto level it after every print but if it is a not really important part and you don’t mind so much if it is not the best I sometimes skip auto leveling the bed)

@ekalbtratloc8107 Жыл бұрын

I was having trouble with the firmware side of this for my ender 3 max, but this video was absolutely perfect! ... unfortunately I did somehow manage to install what I believe is Chinese version(as I don't recognize any Kanji and it definitely isn't English😂). So I'll have to have to quickly fix that, but that was a me problem anyway. Thanks 👍

@grahamtimms70 Жыл бұрын

Just fitted this hotend and fans on my Geetech Prusa pro with a bowden cable.

@chengkuangan1138 2 жыл бұрын

Nice video, thank you for sharing

@thespaundrummer1176 Жыл бұрын

Vlad, nice video, One thing... The G29 code needs to be on a a separate line following the G28 command.I entered it as you demonstrated, but the CL-Touch only checked the center point. After moving the G29 to a separate line, it now checks 9 points.

@KaiLucasZachary 7 ай бұрын

Interesting. The instructions that come with the thing very literally tell you to put it all as one "G28G29" the way he did in this video.

@dylanaalderink1430 2 жыл бұрын

This guy has saved me twice tonight alone. Great Videos!!!!

@leektah354 Жыл бұрын

You didn't mention removing the Z axis limit switch which is no longer needed.

@Byrkster Жыл бұрын

Wait, those mounting holes at 3:28 were not there at the beginning 0:20, did you get a replacement bracket? If so where did you get it. My Ender 3 v2 does have those mounting holes. I was just curious as to where I can find the bracket, or did you tap and die them?

@holgerst3607 2 жыл бұрын

nice video love your content

@nathancogbill8429 2 жыл бұрын

Please do a video on the enter 3 s1, but either way love ur vids

@Fxxje Жыл бұрын

I have it as well, but having some issues with it.. My first probe got damaged because it decided to pop-out mid print bumping my buildplate + print on the floor. Also the probe was bent. Looked like a firmware issue to me, since I didnt get it to again before eventually re-flashing the firmware. I read online that I am not the only one with this issue.. Also, My original glass plate is kind of wonky. @ of the 4 corners are quite low and prevent a good layer adhesion. I would expect the probe to fix this by lowering z on those areas, but it did absolutely nothing. Even after installing a new probe, the corner issue still presists. I mean, what is the use of this product if it doesnt do what it is supposed to?

@MrTurtlefan2 2 жыл бұрын

Hi, If the nozzle is too far at one corner, but to close at another corner, will the CR-touch adjust to that, or would I need to?

@calebkincaid3031 2 жыл бұрын

Love your videos

@SvarogGames 2 жыл бұрын

hiho i was wondering if you have some tutorial or something i have flashforge finder and after a year it starts loosing steps or layer shifting but i dont know how to tight the belts

@cascadesouthernmodeltrains7547 2 жыл бұрын

I fed my cable through the webbing to make it all look like it was made that way. It wasn't too hard to do.

@jacobjohnson3116 Жыл бұрын

Hey so I followed this tutorial but now whenever I print something it heats up to 175 nozzle, 60 bed, then heats up to 200 nozzle, 60 bed, and then both go to 0 and everything starts cooling down, without even beginning to print anything. How do I fix this?

@hakandemir3244 Жыл бұрын

Can someone explain what the point is of having a auto bed leveling sensor while you can turn the nozzle down and level the bed

@crooker2 11 ай бұрын

I just bought the CR Touch but haven't installed it yet. Thank you for your guide. So I'm using the Jyers UI firmware. Will the BL Touch version of the software be fully compatible with the CR Touch?

@alesculek182 7 ай бұрын

Definitely install the cable from motherboard to the sensor via the existing flexi cover. Also Z stop should be removed. Edit: check also your motherboard version when you open the cover and write it down somewhere, I had to open it twice.

@DennisCrawfordJr 2 жыл бұрын

When you are felling it, what should it feel like?

@paulherman5198 Жыл бұрын

Gonna have to order me one. Already got Jyers UI for mine. Waiting on my 4.2.7 board to be dropped off.

@paulherman5198 Жыл бұрын

I would also suggest some Silicone bed spacers. Then you dont have to deal with the springs

@Zack-gs2xt 2 жыл бұрын

finaly a ender video

@planmastercopycenter8801 2 жыл бұрын

Just install cr touch and new firmware. Can not see highlight bar after update. Board version 4.2.2

@wendigo6782 Жыл бұрын

PLEASE HELP!!! After installing my CR touch, I start printing and it performs its leveling at several points (4×4). The problem is that during this upgrade the nozzle turns off for no reason. On the other hand, the heating plate always remains hot. It's annoying because the leveling will be distorted, moreover once the leveling is done the printer does not wait for the nozzle to reach its original temperature again, and starts printing directly. Result: Unable to perform reliable printing. What should I do to solve this big problem?

@josephjolly1957 2 жыл бұрын

Great video.👍

@masony8356 2 жыл бұрын

My printer isn’t reading g codes anymore but the level function shows up any idea what’s wrong? Any help is appreciated

@9495tj 5 ай бұрын

When I hit auto-home, the nozzle moves down until tip of the bed levelling sensor touches the bed and then a little more, and then the sensor tip withdraws fully. But I can see that my nozzle is still about 4-5mm above the bd. When it finally completes and goes home, the nozzle is still too high. I can never get the bed level with the auto levelling kit.

@thedogporch 2 жыл бұрын

Thank you

@juneee7067 2 жыл бұрын

Make sure to unplug the z switch because if you don't it might not work!

@Adam1llion 2 жыл бұрын

Great video! What is that shroud around your fan??

@saturdayshanks3753 2 жыл бұрын

It’s the stock shroud on the Ender 3 V2 :)

@Flirtz420 Жыл бұрын

Hi I did everything up to adding the firmware n turning it on. I set my printer to auto home n it won’t move. The car touch is red also.

@reikyjimenez9097 5 ай бұрын

After starting a print mine auto bed levels the bed again unlike in your video where it just did the two probes?

@danielfiander5731 Жыл бұрын

Don't you have to disconnect the stop bed level sensor at the side of the printer

@andyerwin3535 5 ай бұрын

Does that g29 need to be put on all prints? Or just for the bed test?

@A.Roviso Жыл бұрын

Mine when it levels doesn't pull the probe up it does it the first and last probe only the rest it pushes down twice goes from blue to red and that's it and I feel like it's not working properly

@BzzFest Жыл бұрын

Not sure why only the middle top, bottom, left and right are the ones that isn't lined up. Only the corners are leveled.

@justifiedsins6420 Жыл бұрын

I did all the steps, but then when it came time to print it no longer show any prints available. Have tried multiple times with multiple different prints

@nsvaluto48328 Жыл бұрын

How are you on trouble shooting I have mine installed and a filament sensor. When I auto home the gantry does goes down and the touch does probe the bed

@gray896 Жыл бұрын

So I have a problem my auto level device isn't going down all the way I'm at negative 10 on the z axis and it still doesn't want to go down for the auto leveling

@jasonking4899 2 жыл бұрын

Hi.... I'm quite new to 3D printing.. Just bought the CR Touch and I've fitted to the Ender 3 v2..... But nothing... The firmware for LCD is V1.0.4 .. what is yours? and any other help will be appreciated.

@onlineshaman Жыл бұрын

You forgot to unplug the Z switch, it's not needed anymore and they recommend it to be removed! ✌🏻

@eldiablo3124 2 жыл бұрын

I installed mine how you have yours but it comes up short what did I do wrong?

@MadEvilLemon93 Жыл бұрын

i have the cr touch with my ender 3 v2 and each print requires me to mess with the z-offset and it's usually way higher than 0, the last one was 5.68 and the one before that, 6.29. has anyone else had this issue of it always being so inconsistent? i'm considering just going back to manual bed levelling.

@joygibson6623 Жыл бұрын

I can't get it to "barely touch" I am not sure how to fix this issue. I'm still looking.

@TheGR3ATOne 2 жыл бұрын

Great tutorial, only problem I have is my firmware change the language to chinese. And I tried multiple different versions, all in CHINESE. Lol thank god I can understand the letter A in a box means something about languages.

@magicalcupcakenutz8153 Жыл бұрын

@KILBILL6331 blessed thank you so much

@rtxbacon4998 2 жыл бұрын

Why my Ender 3 v2 stops every time under a hour can you tell me

@spray_cheese 7 ай бұрын

Mine won’t do the 9 point mesh after manually leveling it. I’m just gonna get rid of this thing. Not what I imagined

@UhmazinGaming 6 ай бұрын

Man I’m pretty lost with my ended 3 v2 same setup but I cannot get it to print right

@VolkerSt Жыл бұрын

Okey, thanks. What is the newest Firmware with CR Touch Support? I only see the BL Touch FW... Thanks. Aaaand can anyone explain how to level the CR Touch (Z-Offset)? Thanks.

@brazed420 Жыл бұрын

one of my bolts on the underside is stripped...this is brand new and the first time trying it..im using a precision set of drivers and im highly experienced with working on eletronics l. this is just unacceptable....had to fill hole with soder then place a hot bit into it just to unscrew it

@J2XGaming Жыл бұрын

Great video no kap ✅

@Zack-gs2xt 2 жыл бұрын

can you do a upgrades video

@zach_lush Жыл бұрын

I had an issue where the 3D printer wouldn't read the SD card after doing the firmware update. I ended up installing a different firmware and it fixed it. I used this one below. GD-Ender-3 V2-Marlin2.0.8.2-HW-V4.2.2-SW-V1.0.7_E_N_BLTouch

@andrzejgowacki1979 Жыл бұрын

I have the sam issue. After installing the new firmware, the printer can't read any .gcode files. It has the auto leveling button but it works only partially - the head moves to the center, the nozzle runs towards the bed three times and comes back to left front corner. BUT WITHOUT THE METAL PROBE MOVING! I will check other firmware versions out

@zach_lush Жыл бұрын

@@andrzejgowacki1979 yeah try the firmware, I was fighting with it for awhile but installed a different firmware. Fixed the problem

@easterlingsminiatures 10 ай бұрын

I just can't seem to get the nozzle to where I want it on the bed... I offset the z axis and still it doesn't go close enough when it comes to print... I did all the manual levelling as well... any tips?

@spray_cheese 7 ай бұрын

Same issue, this isn’t much of a “quality of life upgrade” after all…

@mbladeakita9173 2 жыл бұрын

One of the things they don't tell you is you have to rename the .bin file or else it won't work. You are all welcome!

@greenshark6899 2 жыл бұрын

hi, rename it? Thank you

@kenmasters402 2 жыл бұрын

@@greenshark6899 rename to firmware.bin i just figured this out

@ady_kotidou Жыл бұрын

My CR Touch touches the bed, becomes red, and then doesn't do the whole movement to become purple. Any help? It auto homes just fine.

@dea-animator1906 Жыл бұрын

I still have the zip Ties i got when I got the Ender 3 v2

@ScottieLeess Жыл бұрын

Hi i had downloaded the firm ware but my printer wont flash ? any idea ?

@jaydunsmore050897 Жыл бұрын

done all these steps now my auto home is in the middle of bed and super high, I try to lower the z and it won't lower, it has no problem going up

@hufftechsolutions7903 Жыл бұрын

Remove the z access limiter switch on the left

@chadiao791 Жыл бұрын

How to allow z to be negative?

@theonepristinemonk5528 Жыл бұрын

have you made a video about Esteps for us noobs?

@JoshyBoy1214 Ай бұрын

Does it even change the bed leveling

@terraxcell 2 жыл бұрын

When I move z to 0 I still have more room between been and nozzle than I would like 🤔. Bed can’t be adjusted any higher from knobs either.

@Moonsauc3 2 жыл бұрын

Make sure you removed the z limit switch completely, also he talks about fine tuning somewhere after 13:00

@terraxcell 2 жыл бұрын

@@Moonsauc3 I ended up lowering the z off switch to like -1.2. Seems to be working now.

@dwolfenstein953 2 жыл бұрын

@@Moonsauc3 I moved mine down as far as it will go and there still is too much room

@jamesrogers5220 Жыл бұрын

Does this work with a generic Ender three

@mexmenpodcast1843 Жыл бұрын

I did these steps and now my printer won’t leave the Creality logo screen, does anyone know how to help

@Th3WarFish 3 ай бұрын

I just did this and now my printer cant read my sd card what do i do?

@sh9688 2 жыл бұрын

Shouldnt you unplug the Z axis stop cable??

@leektah354 Жыл бұрын

Yes, he never mentioned that, you can also remove the switch all together.

@MrRaki11037 Жыл бұрын

I installed the firmware and now my 3d printer is in japanese and I cant see my print files

@sebastianestevezcarvajal3008 2 жыл бұрын

Still waiting cr10 smart pro

@2Cen0 4 ай бұрын

Probably a dumb question, but once the firmware is updated, can I go ahead and delete the bin files from the SD card, or does the printer need those files on there?

@evlsc400 3 ай бұрын

You've probably figured this out by now, but yes you can delete them.

@Infinity3D-fu6or 2 күн бұрын

i tried doing this but 'level' didnt show up for some reason

@danekincade6299 2 жыл бұрын

Did exactly everything you did. now nothing shows up on my print to print. cant autohome, and i cant level the bed. any solutions ?

@mynamejevin6227 2 жыл бұрын

Did you install firmware for the wrong motherboard type

@Swiipa1Wrld 2 жыл бұрын

How come u didn’t need to unistall the z axis chip ..when i had it on my extruder would shoot all the way to the right and make a grinding noise

@helpforourhomeless1819 Жыл бұрын

Hey, did you ever fix this? I have the same grinding problem. Thanks!

@patrickscarbrough9843 2 жыл бұрын

FYI..... They make the install of the screws of the CR touch to the Bracket look sooooo easy its not got half way done and the hole is so tight it stripped the screws and now it's trash

@larrybud Жыл бұрын

What's the actual DISTANCE in mm that you want the nozzle from the bed? I don't mean "about a sheet of paper" thickness, I mean an actual measurement? Paper comes in all sorts of weights and thicknesses.

@wakeupslaveamerica Жыл бұрын

I agree! Had a cnc router carve, to adjust the belts was told "guitar string tight". That piece of crap could never make a round hole. Perfect way of pushing it back on me. Never give a measurement of some type so it was every time " belts are not tight enough".

@hufftechsolutions7903 Жыл бұрын

There's no actual number...

@wakeupslaveamerica Жыл бұрын

@@hufftechsolutions7903 there could be if they would take a few minutes. All other applications that use belts give some type of measurement. Distance or in inch or pounds of deflection.

@Chrishuff1 Жыл бұрын

@@wakeupslaveamerica lol and how are you going to execute said measurement? you aren't, plain and simple.

@wakeupslaveamerica Жыл бұрын

@@Chrishuff1 yes it simple. I'll bet you tear it down. Just because you or some cheap crap cnc toy aka xcarve or shapoko middleman didn't think of it, right. But they wouldn't want that because they could never have something to blame other than. Wait for it...... "Its not adjusted correct so its your fault its not cutting correct. That's how I learned the x-carve was and is junk. Measurement scale, similar to a fishing scale and a ruler. like any other manufacturer out there that uses belts and actually spent a few minutes to do the measurement and pass it along to their customers. I've wasted enough time on you explaining something some simple.