On this one the mode switch and loading belt is serviced. This JVC is a PITA to tear down to access bottom of chassis. Funai starting to look pretty good!
Пікірлер: 63
@CantankerousDave3 ай бұрын
Thanks, this model was close enough to a HR-VP674U I picked up for $15 to allow me to clean the mode switch and check the belts. Those two screws under the loading mechanism were throwing me for a loop. It’s working just fine now - knock on wood - minus the front panel ribbon cable that I damaged when reassembling it. I have the remote, so it’s not a huge deal. Also, my mode switch had alignment arrows on the black and white parts, making it pretty simple.
@Vince-o6c17 күн бұрын
If it's gotta be done then that's why you guys like yourself will do it for us.
@lawrencehansen6788 Жыл бұрын
My experience with JVC VCRs has been that they work great when they're new, and had very good picture quality. But they seemed to wear out quickly and start having tracking problems, first with tapes made on other machines, then eventually on their own tapes! My first "hi-fi" VCR was a JVC, back in 1993. The salesman (remember going to stores and dealing with them?) was showing me "Top Gun" and extolling the picture quality. But I wanted the machine as a hi-fi *AUDIO* recorder and kept asking him questions about that function. Bought it, worked great, I came to appreciate the PQ, and at about 3 years it started getting tetchy about tracking, and at 5 years it totally failed. ...... After that I got a Mitsubishi VCR - and man, that thing was.... is (still have it) built like a tank. Picked up several more late-model HS-U44x and HS-U74x (the S-VHS variant) Mitsus over the years, most of them like new. People bought one last VCR in the early 2000s but ended up not using them much. I still use a Mitsu as an *audio* time-shifting recorder. Got a coupla low-mileage JVCs in the closet. Should pull 'em out and use 'em up. They prolly won't last long, being just about the models produced.
@12voltvids Жыл бұрын
That's the way i feel about an expensive JVC camcorder I have which is basically a door stop. An expensive one.
@lawrencehansen6788 Жыл бұрын
@@12voltvids Like expensive Mercedes, BMW and Porsche cars - great fun to drive...... when they're not in the shop draining your checking account!
@12voltvids Жыл бұрын
@@lawrencehansen6788 having owned 2 of those over the years i can't agree more. B
@lawrencehansen6788 Жыл бұрын
@@12voltvids Ha, i'ts one Jaguar for me. Lovely car. But ONE is enough!
@12voltvids Жыл бұрын
@@lawrencehansen6788 my dad had a Merc, and I had a bummer. It was, trust me.
@focus82grothm.84 Жыл бұрын
Great repair and info 😊👍 I wish you Happy New Year 😃😃🎉
@usernameg5 Жыл бұрын
I have learned about sevral formally unknown to me formats on this channel. s-vhs, laserdisc, dat and all those 8mm cassettes. Never had any of those in childhood home or otherwise. we had regular VHS of course and cable-tv, c-tape and vinyl record player. born in the 80's
@Nantawat_Kittiwarakul Жыл бұрын
And this crappy mech. was used in ALL JVC vcr of the era - aka the very end of vcr. From the lowest end (mono/playback only/no tuner etc) to the top of the line ones too. Speaking about cost-cutting measure...
@Capturing-Memories Жыл бұрын
To be honest this design is easier for me to work on than those with the mechanism on the left and a bunch of stacked PCB's on the right. Yes the head ribbon is too short and is a bitch to push back in.
@ableite Жыл бұрын
even though you guys call jvc bad, i think its one of the best options here in my country.
@Vintaginside Жыл бұрын
Nice video as usual. These decks are a bit of a pain to work with and on top of that they have the habit of internally destroying the mode switch by breaking the comb contacts attachment to the plastic gear. Once they work, the image is fairly good.
Жыл бұрын
Help me! My VCR Samsung Winner VT-K60 is broken, help me repair please!
@tookeydookey Жыл бұрын
And to think I get annoyed at my Magnavox VCR DVD Recorder Combo unit cuz of how much of a pain it is to get access to the bottom of the chassis as well, this JVC unit just said "Here, hold my beer"😂
@jasonthejawman5442 Жыл бұрын
The in camera infects look great, clear water!!!
@ArchivoHumano Жыл бұрын
Dave, how does the VCR know when it's getting closer to the end of the tape to reduce the speed when FF or REW?
@12voltvids Жыл бұрын
optical sensors on the take up and supply hubs
@user-camdrod7 ай бұрын
Мой филипс вр 969.Всегда точно показывает нахождение пленки.С точностью до секунды! Любую касету вставляю и сразу показывает.Откуда он знает ,сколько пленки? По катушкам! Они по разным скоростям крутятся! Вот так!
@EastAngliaUK Жыл бұрын
surprised how good a picture that vcr gives
@12voltvids Жыл бұрын
They all look that good played on an SD plasma. If i put that on an HD set it would look as bad as the rest.
@jeffadams5510 Жыл бұрын
I think I have 3 or 4 of these with remotes squirreled away. 2-3 work fine but the extra one is a fireworks show as soon as ac is applied...so yeah it's a parts unit for the others :)
@lustrian024 күн бұрын
Hey @12voltvids I need to find extra buttons on the main board. the eject and play buttons are completely missing on the board and I can't find a part number for them. Do you have a site or retailer you frequent for those parts?
@thomasraden Жыл бұрын
Regarding preserving old tech knowledge. Do remember that NTSC meant "not the same color". Referred as to that the color of an analog TV set was sometimes wrong in phase, I.E. skin color could look green. Also if you stumble upon an old audio recording with hum, its 60/120hz in North America, 50/100hz in most of europe. When stumble into North America and especially Canada, they have a french dish called Poutine, they were a "tuk" (which I still have here in Norway wearing) and they have a British sense of humour that we europeans can identify to.
@12voltvids Жыл бұрын
No no no you got it all wrong. Never twice same color. That problem BTW was solved by a feature called VIR. Vertical interval reference. TVs that had that were dead on for chroma, black level and phase. My parents set had it and it was beautiful. Has a light that came on when broadcast has it. Most of the large stations did. You could turn it off if you wanted but when on it worked great.
@thomasraden Жыл бұрын
@@12voltvids Thanks for the info Dave, did not know that. Regarding analog video, I do hate the croma "dot crawl" you get when our national TV provider here save old recordings. They transfer analog video with just a composite cable, not with s-video or other component means. There are analog to digital video converters with an inbuilt comb filter, but apparently that knowledge is dead by now.
@12voltvids Жыл бұрын
@@thomasraden the only way to avoid for crawl on analog video is if it was shot edited and kept on a component system such as BETACAM hi8 or svhs in every step. If it ever went to a non component system such as 1", quad, 3/4" or went through any legacy tbc or switcher the dot crawl has been introduced.
@clifffton Жыл бұрын
I've got a 3800. A way better picture that any Funai. The later Panasonics (maybe the last of them?) were a giant pain to disassemble too. Worse that my 3800.
I have the S3500 which inside looks just like this unit. I was curious what type of grease can I use on this unit? My unit just turned 25 years old last Friday and I would like to get some grease to apply where needed. Thanks! Love your channel!
@12voltvids10 ай бұрын
I use molykote which is a lithium soap grease
@NJRoadfan Жыл бұрын
Those pieces of crap (at least the DigiPure equipped models) sell for big bucks now. Overall it is a reliable chassis unlike the Dynamic Drum units that have that gear that always breaks. 20 years later my cheapened for 2000 HR-S7800U is still kicking along with no problems what so ever. I'm kinda pissed that my HR-S7500U just decided to *pop* and die when I plugged it in one day. The drum gear didn't even break yet.
@dadbabyletsplayz513210 ай бұрын
On my HR-S3500U both roller arm assemblies (P2 and P3) seem loose to me. Should they be tight and not be able to wiggle them? I think it was one of your past videos where you mentioned that and I can not find that video.
@jimmyrigged12924 ай бұрын
I Love VCR's , i have a few in need of repair but ... i just picked up Samsung 960H time lapse SSC-960 for 5 bucks , it wont take the tape in but I can manually make happen and the loading motor only advances about 4 teeth on the gear then backs up and displays a fault icon on the display ...I cant find a replacement loading motor anywhere...im willing to let u have a go at it if yould like ...lmk , great video btw ..I subbed
@12voltvids4 ай бұрын
Depends on parts. None are available these days.
@worroSfOretsevraH Жыл бұрын
I guess not, but I'm asking anyway. Would you like to make some theory videos? On video stuff, (composit, component, etc) VCR stuff (both mechanical and signals related, tape recording formats)
@12voltvids Жыл бұрын
So i CAN PUT U TO SLEEP?
@adudette9965 Жыл бұрын
I have had a JVC HR-D600E vcr serviced but they told me the head is worn out. It works now and then, randomly with or without static, or just audio only, or no signal at all. any idea's perhaps? Or is it time for retirement? Cool video's btw.
@videogamepolak0 Жыл бұрын
is there a place to buy like a belt replacement kit with common sized belts?
@markmarkofkane8167 Жыл бұрын
You know. When you ASSUME... Yes, I do that a lot. Great job! (Assumption the mode switch was going to be a piece of cake)
@12voltvids Жыл бұрын
I never assume but I do procrastinate. I get up relatively early and it usually if we'll after lunch that i drag myself up the garage and then it takes me another half an hour to decide what I want to work on if anything.
@videogamepolak0 Жыл бұрын
what is the whole mechanism called that you remove that holds the tape, off the pcb?
@CanizaM Жыл бұрын
What's the most easily serviced VCR mechanism? Some of the Sony ones weren't too bad as the chassis just pulls out after 4 screws, and the connectors are all plugs on the bottom that don't need to be handled separately. Too bad about that blue gear issue though...
@12voltvids Жыл бұрын
Anything as long as it isn't an ancient Sony Beta
@zx8401ztv Жыл бұрын
Well done that's a quick fix :-D I would be surprised if that machine had anything to do with jvc. Just a badge. Most cheap crap tv's are made by vestel and rebadged.
@mrnmrn1 Жыл бұрын
This one is probably still JVC, but definitely not Vestel or Beko. If it's rebadged, it's probably Funai or some other Japanese OEM.
@AdaptiveRider Жыл бұрын
I have a pair of betamax players, as well as a Sony DAT player and dual cassette deck that arent working properly. Would you be willing to take a look at them? I am paralyzed from my chest down and have a traumatic brain injury, so I'm not able to work on or repair electronics like I used to before the hit and run accident by a driver while riding my motorcycle on the highway. I miss doing my own work, but I'm thankful to still be alive!
@AdaptiveRider Жыл бұрын
@victorangel7784 Do you have a way I can send you some info the make and model? I could send some videos on what's going on with each unit if that would help?
@timwerth5106 Жыл бұрын
If anyone could help, I'd surely appreciate it. I've asked this on a couple forums with no response yet. I have a Fisher amplifier that isn't sending any power to my Fisher cassette player. What do I need to check to find the issue to my problem?
@12voltvids Жыл бұрын
Not enough information to provide any tips. Is the tape deck powered with mains or low voltage for starters.
@ACURAOCULTA Жыл бұрын
Very nice
@voicumeanstruth8341 Жыл бұрын
new sub here..will need ur help..i have a panasonic 50 inch plasma Panasonic TH50PZ750 i turn it on..and after 5 secs turns off automatically..what this could be? do i need to open it uup and afsten the screws inside a litle bit more? the ground screws?
@12voltvids Жыл бұрын
first if it's a Panasonic plasma or any plasma for that matter pull the back off it and make sure that all the screws are tight. If they are turn it on and watch for the blink code when it turns off the power light will flash and it'll flash a code like maybe five blinks and then a pause and then five blinks and a pause or nine blinks and a pause count the number of flashes because that will give you a hint as to where the problem is and you can Google the number of flashes for the model and it will tell you where to look whether it's a fan that's not working or a voltage that's missing or overload it'll at least tell you what section to look in
@voicumeanstruth8341 Жыл бұрын
@@12voltvids thank you so much! u r briliiant.very kind and helpful..will share one of your videos on my facebook for my friends to see u
@zoubirdjelouah3273 Жыл бұрын
Good
@kevinfisher1070 Жыл бұрын
U are the Busiest person u never stop
@12voltvids Жыл бұрын
I do keep fairly busy.I only do these on my days off from my day job. So now I have a 5 day shift of 10 hour days. I am going to be dead by the end of it.
@AdaptiveRider Жыл бұрын
@@12voltvids We appreciate your vids tho! :)
@Thanson199415 Жыл бұрын
I’ve been watching you for 8 years and still enjoy content from you, I love repairing electronics myself ❤️ love your vids