Please Like, Share and Subscribe to Support My Channel Buy me a coffee by clicking the link below www.buymeacoffee.com/DSUnscripted
@DavidSusiloUnscripted2 жыл бұрын
My apology, once again I get fluctuations in the audio although I didn't change any of the audio settings during recording. I still don't know how to fix this :( Buy me a coffee by clicking the link below www.buymeacoffee.com/DSUnscripted
@frhwebmaster2 жыл бұрын
Great Video!
@jeffspeck9262 жыл бұрын
Great video and very helpful. With your personal setup, will you choose to let the UB9000 handle things or will you choose Frame Adapt HDR within its picture mode setting?
@DavidSusiloUnscripted2 жыл бұрын
I personally no longer use the UB9000 tone mapping as JVC Frame by Frame HDR Adapt is already highly performing.
@DavidSusiloUnscripted2 жыл бұрын
Thank you for watching. Please like, share, and subscribe to my channel.
@frhwebmaster2 жыл бұрын
I like 7500K even with other projectors.
@nhernan1562 жыл бұрын
David, I'm trying to do this all myself on my JVC NZ-7 . I was watching your videos and I'm trying to do what you say and I've read the JVC manual online... It's not really difficult at all to do but I'm not happy with my black levels yet. I'm debating with the 6500vs 7500 Kelvin. I get a nice bump in brightness when I choose 7500 Kelvin too. I definitely like the HDR level at +1. It really brings out the picture and pops! The only thing is I think the projector has a green tint to it. I went to "tint" to try and make it look more white. Even when you see the "DILA" logo when the projector turns on you can see it's not white but green.. I was watching the new "Batman" movie and it looks great but the blacks just aren't there. I am running the lamp on high and I do have a 135 inch screen with 1.1 gain and 16.9 aspect ratio. Any suggestions you might have. I thought I might be able to get OLED black levels but not at the cost of having a very dim picture. I definitely have my theater optimizer on too. I'd appreciate any of your thoughts
@DavidSusiloUnscripted2 жыл бұрын
That logo will remain the same colour regardless of your setup. Bring the contrast down to -5 to reduce a lot of the green
@nhernan1562 жыл бұрын
@@DavidSusiloUnscripted You're awesome for replying so fast. I'll try and bring the contrast down. Thanks for telling me about the logo. Just bring the main tint level down? They have where you can bring the individual color gains down etc
@nhernan1562 жыл бұрын
@@DavidSusiloUnscripted You like 7500 for HDR too, huh?
@DavidSusiloUnscripted2 жыл бұрын
@@nhernan156 as a preset I choose the 7500 as it is close to 6500 than the 6500 preset, but at the end of the day, as a professional calibrator, I calibrated my projector.
@DavidSusiloUnscripted2 жыл бұрын
@@nhernan156 I leave the tint as is, just bring the contrast down by 5 steps.
@warrenshaw2186 Жыл бұрын
Hi, I just saw this video! It is terrific. I had one question: for the HDR settings, do you turn low latency on or leave it off. For SDR you had it on, but for HDR it was left in the off position. Was that intentional? Thanks,
@DavidSusiloUnscripted Жыл бұрын
Thank you for watching it. Great eye for catching that. For both SDR and HDR I should turn low latency on. Don’t forget to watch my newest JVC video as it discusses the latest upcoming firmware from JVC
@warrenshaw2186 Жыл бұрын
@@DavidSusiloUnscripted Thanks! I am getting my new NZ9 delivered and installed in a few days, so this is very timely!
@robertpiil4032 Жыл бұрын
Great video David, What settings would you recommend with MadVR Envy Extreme??
@DavidSusiloUnscripted Жыл бұрын
Not that I don’t want to help, with madVR it becomes so very complex that I need to be in your room to measure and do the settings
@robertpiil4032 Жыл бұрын
Thanks anyway David. A bit too far away as I am in Australia. 😂. It was more of what settings for jvc so it is bypassed and just the envy doing the processing.
@DavidSusiloUnscripted Жыл бұрын
Aha! A fellow Strayan!! I used to live in Perth, WA!! If you want to disable the functionality of the JVC, make sure you do NOT use frame adapt or scene adapt HDR on the JVC and let madVR do the work. I also do calibration in Australia, Indonesia; worldwide, actually.
@robertpiil4032 Жыл бұрын
@@DavidSusiloUnscripted I am also from Perth. If your ever in the neighbourhood would love to have you do a calibration on my NZ8. Only done 50hrs so really enjoying it, particularly after setting with your advise. Sure made a difference. Thanks again.
@DavidSusiloUnscripted Жыл бұрын
@@robertpiil4032 no worries! Which part of Perth? I used to live in Booragoon! I really miss Perth. Should have stayed instead of moving to Canada.
@MrGuitarman09082 жыл бұрын
Great video. Just got my 4100 set up and I’m wondering what I need to do to make it output in 8k? I have 8k e shift on and I’m sending a 4K hdr picture. I was under the impression that it would upconvert.
@DavidSusiloUnscripted2 жыл бұрын
Yes. That will automatically be upconverted to 8K. Thank for watching the video. Please subscribe to support this channel.
@MrGuitarman09082 жыл бұрын
@@DavidSusiloUnscripted thank you. I went to the info and it shows the resolution at 4K. Will it say that it is output of 8k or does it always say 4K? Thanks again.
@DavidSusiloUnscripted2 жыл бұрын
@@MrGuitarman0908 yes. When you click info, what you see is the input signal. So if your input signal is 4K you will see 4K in the info section.
@FrankieKennethL Жыл бұрын
For some reason I do not get BT2020 Wide option on my RS2100
@DavidSusiloUnscripted Жыл бұрын
The 2100 does NOT have the wide option
@FrankieKennethL Жыл бұрын
@@DavidSusiloUnscripted ahhhh. Ok, that explains it. Thanks
@gary148824 күн бұрын
Do you have any thoughts on filmmaker mode now that they’ve added that?
@DavidSusiloUnscripted24 күн бұрын
I find the Natural is still better than FMM. For some strange reason, FMM adda a slight touch of sharpness enhancements. I ended up not using the FMM and use Natural instead. Also if I remember correctly, FMM doesn’t allow frame adapt HDR.
@gary148824 күн бұрын
Perfect. I’ll give these a go. Also gonna pick up a Spyder to do the auto cal. New to the NZ7 as of last week so trying to get the just right look for sdr and hdr. Also use primarily Apple TV and apps KZfaq, KZfaq tv, max, movies anywhere…then an Xbox and a Sony Blu-ray 4k.
@DavidSusiloUnscripted24 күн бұрын
Try this one AFTER you’re doing the firmware version 3 on your JVC. NOT Calibration - JVC Firmware 3.0 Recommended Settings kzfaq.info/get/bejne/brqSa6ymmarQdY0.html
@gary148824 күн бұрын
@@DavidSusiloUnscripted ahh. Ok I’m on 3.0 now.
@DavidSusiloUnscripted24 күн бұрын
@gary1488 yup. Just follow the link I gave you.
@jaxonve73072 жыл бұрын
Hi Do you have a video like this for the jvc dla-n7 also..? (RS2000)
@DavidSusiloUnscripted2 жыл бұрын
Yes I do, here it is. Hopefully the link works (usually KZfaq doesn’t allow me to link) kzfaq.info/get/bejne/gcyRfJWGmL_TkYE.html
@jaxonve73072 жыл бұрын
@@DavidSusiloUnscripted thansk..😊👍
@jaxonve73072 жыл бұрын
@@DavidSusiloUnscripted is it the same frame by frame and so on..?
@DavidSusiloUnscripted2 жыл бұрын
@@jaxonve7307 it is pretty much identical when it comes to that. Kindly share and subscribe to my channel.
@jaxonve73072 жыл бұрын
@@DavidSusiloUnscripted so just put in the same in the jvc dla-n7 as this one also..? Il subscribe..😊👍
@shaneducholke3642 жыл бұрын
Does this mean you got your new JVC??? I can't wait for you to get it so you sell me your X7 for a smoking deal😉😉
@frhwebmaster2 жыл бұрын
Going to have to wait in line bro 😎 😂 😆 😝
@shaneducholke3642 жыл бұрын
@@frhwebmaster 🤣🤣I told David over a month ago he was selling it to me dirt cheap. He didn't officially agree but his laughing face didnt say no either🤣
@DavidSusiloUnscripted2 жыл бұрын
This video created using my client’s projector. Mine is still coming.
@shaneducholke3642 жыл бұрын
@@DavidSusiloUnscriptedmakes sense, I thought you mentioned on FB that it was at least another month or two😭
@frhwebmaster2 жыл бұрын
@@shaneducholke364 😂
@frhwebmaster2 жыл бұрын
Natural? Not Cinema??
@DavidSusiloUnscripted2 жыл бұрын
Yes. Natural preset is a lot more accurate than Cinema
@DavidSusiloUnscripted2 жыл бұрын
Please Like, Share and Subscribe to Support My Channel Buy me a coffee by clicking the link below www.buymeacoffee.com/DSUnscripted