No water coming from Rancilio Silvia. You can order the pump on our website: www.kanencoffee.com/store/p/u... I love this Dyson vacuum for cleaning up coffee grounds: amzn.to/3oF45dr
Пікірлер: 55
@mrc0ff333 жыл бұрын
This was very helpful. The pump died on my Silvia and I used your instructions to successfully change it. It might be helpful to others that when buying a new pump, it doesn't need to be the EP5 and can be an EX5 ("P" = plastic; "X" = brass).
@kanencoffee Жыл бұрын
Agreed.
@lydiapula1563 жыл бұрын
Thank you so much for that perfect description. I'm from Germany and your english is so easy to understand. So everything worked out great. Thanks a lot!!!!
@darosa57413 жыл бұрын
I'm so glad I found your video. I was about to ship my Silvia to a repair facility. It took me less than 5 minutes to remove the pump. Replacement pumps are readily available so one's on order and on its way to my residence. 👍
@iraholston58553 жыл бұрын
Very helpful! I should have also checked the intake hose for the pump. It was clogged at the pump with a piece of a coffee bean or something! I followed your excellent instructions and replaced the pump anyway. Thanks!
@raymci982 жыл бұрын
Thanks so much for this video. Since my aptitude for such things is almost zilch, I watched and re-watched the video several times and managed to successfully install the new pump (with the brass fitting that you demonstrated).
@baka-yarou Жыл бұрын
Thank you so much for posting this video. Excellent walk-through. My Silvia is now back to working condition. Wouldn't have thought to blow through the pump, so thanks for that little tip as well.
@janicehoward59152 жыл бұрын
I was able to repair my machine using your video, which is a good thing, since I've no idea how much it would have cost me to get it repaired from where I live. I'm guessing, with shipping, your video saved me a few hundred dollars. So, thank you!
@clouxles2 жыл бұрын
Guys like you may my life easier! Thank you
@MrJonasjonaitis2 жыл бұрын
I have 2 months old Silvia V6 and was not able to pull a decent sweet shot no matter what I did in prep, tamp, grind. I always had a puddle of water below drip tray after using machine. Thought this was over splash from pressure release valve and event put Silvia on stand and put on a silicone tubing directed through existing hole in frame and to the drain can and put smaller drip tray to just catch the water from group head (this is one of the nicest improvements I have done on its own!) L. Still a puddle! Then figured out that 90 degree elbow connector from pump to braided hose was leaking on the thread. Applied 10 cm of teflon tape on the connector and no leaks so far. Shots coming out perfect! Conclusion - pressure instability immensely affects your brew quality.
@user-hx4kw2mb5g7 ай бұрын
Excellent video, thank you so much! Didn't have a compressor, but managed to blow out the pump with a bicycle pump, wouldn't work without that step.
@f1lupo3 жыл бұрын
great & straightforward vid thanks a lot!
@wbmstr90002 жыл бұрын
Fantastic video. Very helpful. Thank you.
@SA-lw3xi2 жыл бұрын
Thanks heaps-my shower screen had progresively blocked and i had interpreted it as a gradually failing pump!!
@mogleedick43933 жыл бұрын
Well done, thank you.
@LongLongHoneymoon2 жыл бұрын
Great video! Thanks 😊 🙏
@zwenson5311 Жыл бұрын
Very haelfull, thank you !👍
@FatNorthernBigot3 ай бұрын
Child supervision and pump replacement sounds like hard work. 😉
@Ziqver2 жыл бұрын
Thanks for the video! There is no water coming true my machine anymore. It use to be that sometimes it did and sometimes it didn’t. But now, nothing. So I thought it must be the pump. I think I will buy a bump and try to change it my self.
@smaximillian2 жыл бұрын
So was it because of the pump? Were you able to repair it?
@Ziqver2 жыл бұрын
@@smaximillian Hey! Yes! I followed this video and thanks to it, it is as good as new =)
@marcva100 Жыл бұрын
Thanks for a great video...question. Do the pumps get tired? or is failure a binary thing? I feel like my pump is not generating consistent pressure and wonder if the impeller is starting to give way. It seems like an easy enough update to keep the machine fresh. LMK and I'll order one from you.
@ketle3699 ай бұрын
My pump didn’t die but was noisy and pumped a little bit to little water. Replaced it with the brass new one. Now it’s quiet and pumps more water. I’ll try to adjust the grind and pressure to get more creama next.
@rmack3503 жыл бұрын
I have an EP5 replacement pump. is Loctite 290 is the right sealant to use on the EP5?
@TheHughyg2 жыл бұрын
Hi. My Silvia (10 years old) is struggling to pour a shot I’ve descaled several times but am thinking the pump could be worn out. Does that sound like the problem?
@photomediavideo5 ай бұрын
could you use teflon tape instead of loctite? i'm not sure about loctite being in contact with water that I will be consuming?
@Coffeelvrrr3 жыл бұрын
Good vid - I replaced the same pump on my Quickmill Anita. Wish I'd seen this before I did - I would have blown out the pump. I think it has an air-lock so I'm going to take it back apart and do that. But why not use teflon plumbing tape instead of lock-tite?
@kanencoffee3 жыл бұрын
Teflon is fine, lock-tire is faster and more predictable.
@fuzzingaround Жыл бұрын
Hi, is it possible that I've damaged my pump when no water was in the machine for a few seconds? It made a weird nose and now the pump seems to work but very slow. Takes for ever to make a cup of coffee. Barely no water flows out. I've cleaned the machine after that with white vinegar in the tank and running it in the system to get the tart out but no progress.Thx!
@sonymirrorless10 ай бұрын
Thanks for this. I burned out the pump on accident. Unattended timer and the water button being on (Google it, surprisingly happens more than you might think.) I do wish Rancilio would put a max timer switch on the pump or at heat switch. The boiler at least has one.
@errigrАй бұрын
Yep, just did that today. Ran for a half hour before I heard it
@BikeHuggerАй бұрын
@@errigr Right? It wouldn't take much to add a timer to the pump.
@MattHarris85 Жыл бұрын
My pump now takes 10-20 seconds to start after I press the button. I get a very quiet sound at first and the after the 20s has passed it pumps as normal. Is the pump needing to be replaced?
@bigtreeproductions9 ай бұрын
I'm trying to diagnose a problem with a Silvia machine. The pump seems to work fine, lots of pressure, internals looks fine. Once machine gets hot the pump sounds weak, doesn't pump. I have checked the connections. Could it be a bad pump?
@bwap11 Жыл бұрын
It would have been helpful if you demonstrated the intake tube vs the pressure-release tube so we can know visually which one connects to which fitting
@austinado16 Жыл бұрын
He shows that at the beginning of the video, at about 00:55
@abdallaissa42333 жыл бұрын
I have a problem with a machine that damages the board code 4 RANCILIO CLASSE 6
@JeanetteSalvatierraTV3 жыл бұрын
I own a Rancilio Silva, when making coffee the pump stops making its regular noise for a second or two. How can I tell if is a bad pump or the solenoide?
@mrc0ff333 жыл бұрын
If water doesn't come out of both the group head or steam wand, it's a bad pump.
@giuseppebuscemi48974 жыл бұрын
Saeco magic confort
@NeoLaydin3 жыл бұрын
Is it possible/practical to replace the vibration pump with a rotary pump? Looking for ways to make the machine a little more quiet.
@kanencoffee3 жыл бұрын
There is not room on the Rancilio Silvia.
@BassKlef13 жыл бұрын
my rancilio silvia delays and then the pump goes on. Is it time to replace? What model is that brass version is it EX5?
@ketle3699 ай бұрын
Yes, EX5 is brass version. Else it’s similar. I bought brass because it was like 5 dollars more and a little more solid.
@plotfi13 жыл бұрын
Do I need loctite for the EX5 bass version??
@ketle3699 ай бұрын
Yes, it’s always a little extra security to use some Locktite. Be a man, buy Locktite.
@lauriebrown74462 жыл бұрын
What was the product in the red bottle?
@ketle3699 ай бұрын
Lock tite. Use the blue one. Other colors may weld the screw so it’s impossible to remove the screw later. The blue one is more like sticky note concept. Sorry my bad English. The bottle is red and the lock tite inside is blue color. You need half a drop on one screw.
@kanencoffee Жыл бұрын
Order the pump on our website: www.kanencoffee.com/store/p/ulka-ex5-vibratory-pump The EX5 and EP5 are interchangeable. I like the EX5 better because the output fitting is made of brass instead of plastic.
@abdallaissa42333 жыл бұрын
Hello
@marcva100 Жыл бұрын
um...not many people have air compressors
@ketle3699 ай бұрын
Be a man, buy an air compressor 😂
@ALTO77302 жыл бұрын
is this #TooApree censored, you guys sounds so similar.....