how to build a fire pit from a truck wheel part 2

Рет қаралды 27,521

4 жыл бұрын

In this video we will be working on the truck wheel fire pit.
Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V amzn.to/2yviG5x
Hobart 500559 Handler 140 MIG Welder 115V amzn.to/2yrVLYO
Rust-Oleum 241169 High Heat Ultra Enamel Spray, Black, 12-Ounce amzn.to/3blwbTZ
DEWALT Angle Grinder Tool, Paddle Switch, 4-1/2-Inch, 11-Amp (DWE402) amzn.to/3e1Hm63
4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel amzn.to/2yHh4WD
As an Amazon Associate, I earn a small commission from qualifying purchases.
This will not, however, change the price of any product you purchase.
This helps support the channel and allows me to continue to make videos.
Thank you for the support!
Keep it real & clean.
Help Support My Channel paypal.me/kevinrobinson6688 Thank You.
Fan Mail kevinrobinson6688 P.O.Box 123 Bobtown,PA 15315-0123

Пікірлер: 48

@Hatch61 4 жыл бұрын

That is going to work fine, let the memories begin. Thanks for inviting us over, be well my friend.

@alexrodriquez6451 4 жыл бұрын

This would be a good quarantine project for my kids to learn how weld with my everlast equipment.

@Robinson-Homestead 4 жыл бұрын

You and the kids could cook to that would be fun thanks for the comment Alex.

@texdog2772 4 жыл бұрын

Weld a tire rim on the bottom and bury it ,will stabilize and stop anybody from stealing it. Turned out very nice.

@PaulDGreen-bu4iz 4 жыл бұрын

Still looking good Kevin! Thank you for sharing!

@Robinson-Homestead 4 жыл бұрын

Thanks Paul

@TheWoodHaven 4 жыл бұрын

Man, that thing just keeps getting better and better. A pot hanger? That's some next level stuff right there.

@Robinson-Homestead 4 жыл бұрын

Pot hanger for sure thanks Daryl

@markchambers691 4 жыл бұрын

The fire pit/grill is looking awesome. You know it will last because it’s Built Kevin Tough. Your an inspiration to us all.

@Robinson-Homestead 4 жыл бұрын

Thanks for the comment Mark.

@bentnickel7487 4 жыл бұрын

I can see a big pot of ham, beans and onions being made out doors in the fall with a huge pan of corn bread with red and green diced peppers on the grill. Enough for about a dozen of your closest deer hunting friends. ♡♥♡♥

@TomokosEnterprize 4 жыл бұрын

It is always a nice visit with you bud. Esp. on projects that take a bit of steel and add a piece to it and then again and again till done. I think one of these would be great in my back yard for sure. A couple good hot fires and the paint will be gone and then a good meal can be had. I Nice build my friend.

@carriegreen8262 4 жыл бұрын

This is so cool. Very creative.

@petersallander2455 4 жыл бұрын

Great build

@sheilabowers7532 4 жыл бұрын

Really looking good old buddy can’t wait to see it feel it catch you on the next video G-man’s out

@gatorsworld 4 жыл бұрын

Looks really good Kevin....grate and a dutch oven on top and it`s elevated....what a nice project and you`ll be able to use it all Summer....CHEERS

@Robinson-Homestead 4 жыл бұрын

I hope to cook some good food Gator thanks for the comment.

@codyswilley Жыл бұрын

The pieces of scrap 1/4 round stock you had. I would have bent about a 4" piece 180° and welded it to each side of the grate to have small tabs to stick your finger in to lift the grate up with or without food on it.

@Robinson-Homestead Жыл бұрын

Good idea thanks for the comment.

@michaeljones7044 4 жыл бұрын

Thats very cool Kevin. Have to get myself a truck rim and do something similar. Love the cooking rack idea. Thanks

@Robinson-Homestead 4 жыл бұрын

Go for it! have some fun.

@REVNUMANEWBERN 4 жыл бұрын

BEAUTIFUL idea, and will last a lifetime, ONLY thing I would of done differently was to make the grill part out of stainless

@Robinson-Homestead 4 жыл бұрын

Stainless would be great for sure thanks for the comment.

@rodneyhendrickson5094 4 жыл бұрын

That's really nice Bud I like that I just mite have to make me one Great Video

@ronsites2694 4 жыл бұрын

Kevin, really looking good. You are going to have a first rate grill. I was just wondering how many people know what you are talking about when you say roof bolts? I agree that people may walk into the handle, make it removable with a place to store it??

@augielimon7029 4 жыл бұрын

Awesome job. I'm glad I subscribed to your channel. Question.... do you think it would be good to cut out a few holes around the pedestal down low in order to help create an updraft to help your fire burn clean, Kinda rocket stove air flow ?

@Robinson-Homestead 4 жыл бұрын

Will give it a test run and see how it goes we may need more air thanks Augie Limon

@peacehavenpointe1454 4 жыл бұрын

Great job 👍 Mr. Kevin, on the 🔥 fire pit / grill, you were talking about steading it to the ground, this would work, 1/2" piece of pipe 2 to 3" long ,weld vertical 3 pieces spaced out around piece of big pipe on the bottom, then make some L- bolts approximately 16 to 20" long and drive into ground, this should hold it, THANKS and as always REMEMBER JESUS LOVE'S YOU 🙏🙏🙏 BTW. As far as roll offs on the grill, how bout a piece of 1/16" x 1/2" flat iron weld as you bend around the top of the grill, you know weld to the part you had trouble bending in a circle. THANKS!!!

@hemansr3893 4 жыл бұрын

Really coming along nice Kevin!!! I'm guessing you must lie awake at night thinking about these things!!! :>)>

@texdog2772 4 жыл бұрын

Grill bars 5/16 ?

@gerardbauer4035 4 жыл бұрын

Lookin good my friend. Your ideas are really great. You never cease to amaze me. Seems you are getting closer and closer to that well deserved steak Lol. Looking forward to next video for sure. Be well, stay safe and stay healthy.

@cutweldngrind 3 жыл бұрын

I started buring the paint off the rim I was given and looks just like this one. Let's see how mine comes out but a storm is rolling in so might delay me.

@Robinson-Homestead 3 жыл бұрын

Let me know how it works out Jorge.

@cutweldngrind 3 жыл бұрын

@@Robinson-Homestead I sure will. Its been raining 2 days straight and got rain for the entire week. Where can I find big truck wheels at. I have gone to tire shops but no luck. I may post on craigslist or market place.

@floydbarbour5098 4 жыл бұрын

If you bury it in the ground the center area will not have no air coming in the small holes

@stefankuhnert1672 3 жыл бұрын

Las das Loch in der Mitte und Schweiße ein Rohr als Zuch.Und Bohre 6Loscher und der zieht wie Sau.👍

@Robinson-Homestead 3 жыл бұрын

thanks for watching

@12341walkman 4 жыл бұрын

Hi Kevin, great video. I was thinking that the rod you were going to put on the underside of the grill might keep the other rods from warping from the fire heat. Can't wait to see how it turns out. May God keep you and yours safe and healthy.

@theresatruax3846 4 жыл бұрын

👍

@Robinson-Homestead 4 жыл бұрын

Thank you Theresa

@texdog2772 4 жыл бұрын

Your handle might be a little long someone running into it in the dark/

@stefankuhnert1672 3 жыл бұрын

Nehme ein Ersatzrat das hat nur Schlitze und du brauchst weniger zu Schweißen O.k.😒

@Robinson-Homestead 3 жыл бұрын

thanks for watching

@williammcguire3rd 4 жыл бұрын

Woo hoo I'm first. Lol

@Robinson-Homestead 4 жыл бұрын

Thanks William

@williammcguire3rd 4 жыл бұрын

@@Robinson-Homestead doing a great job so far. Keep up the great work!🇺🇸👍🇺🇸

@jamesveach6918 4 жыл бұрын

Kevin you're very wise guy you probably make a person a very good friend because I know you've got to believe in God because I can see it in your face

@REVNUMANEWBERN 4 жыл бұрын

WWWWHHHHHAAAAAAATTTTTTT ???????????????????????????????????????????