I'm excited to see all the different options come out!

I'd rather have the plate than pay for a ticket haha

Super easy install!

It's going to be tough, the OEM design looks really good to me!

It was only a matter of time!

Thanks!!

I used 10-32 rubber expansion nuts I found at my local hardware store

Appreciate the support! Hope you're enjoying the car as much as I have!

SOOOOOON!!!!

Interesting! I'll have to look into that!

Looking to do this to mine! Any tips or guidance on how you installed?

@@markmedia3871 I used the wiring from the main harness in the trunk. I did not remove any tail lights. There is a rubber grommet in the trunk that drops the wires right were you need them. I remember it was a brown wire for the brake light source. Bulbs and sockets I just bought on amazon.

@@markmedia3871 kzfaq.infon_AWn8wpGKw?feature=share

I remember doing that on the previous gen as well! Simple and cheap mod!

@@boost331 didn't happen do to any install vids or pics did you?

They'll likely come out with tail lights to match.

Not a terrible solution for now.

They'll be fixing the fitment for sure with their own cover.

Yeah, I hope they get rid of that law soon.

That's a good question. I don't want to say it's blown out of proportion, but right now we have only seen a small handful(if that) of cars with issues. Of course, there could be more that have not surfaced, but I really can't say anything for certain until there's more evidence that this is a widespread problem. Am I tempted to drop my oil pan to check? Yes, but I also don't want to cause myself anymore headaches if Toyota does decide to do something about this and then I try to go in to have them fix it and they refuse saying I've tampered with the oil pan. So I guess I'm saying we need to wait to gather more info. I'm happy to see the press is picking it up though. I'm hoping that will for action from Toyota.

@@KevinVo Could it be possible to detect a noticeable amount of silicone in the oil by doing an oil sample like Blackstone Labs? I'm guessing if you go with this route, don't have to take apart the oil pan and risk voiding warranty.

@@BPEKSupraInteractive early on there may be a high silicone level in the oil anyway. It may give you an idea but wouldn't actually tell you if you have the issue or not. The only way to be sure is to drop the pan and look (which voids warranty from my understanding). My plan is to keep giving it hell and let toyota throw another block in if it messes up. At least until they come out with an official fix or response then there doesn't seem much we can do.

Yes, pretty much any of the BBK kits that fit the previous model will fit the GR86. Not everything will fit the BRZ though due to the aluminum knuckles.

What exactly do you want to know about the hood? I'll probably end up doing a video on the RTV.

are you talking about the hood fluttering at higher speeds?

Yes, lots of manufacturers these days utilize rtv instead of traditional gaskets.

Even worse is that if there is something wrong with the engines, Toyota technicians will just make the problem worse. If you really want one, I'd highly recommend going with a BRZ even if it is uglier. My local Toyota dealer didn't have the necessary parts for my first oil change so I had to pay my local Subaru dealer to do it instead.

I have 17,000 miles plus on my car with ab 4 oil changes and so far everything has been good just keeping a eye out the best I can do

I'll be covering the RTV issue soon!

I think I'm going to look at different options.

I guess you'll just have to wait and see!

The wiring harness is something that will be available on FTspeed.

I'll likely be doing a video covering the RTV issue.

Shipping is so expensive to Hawaii haha

@@KevinVo Yeah I know :(. Luckily when I got my exhaust they gave me a deal on shipping since I was ordering so much. Hoping for a good Black Friday sale or something.

Hmm let me see if I can find the packaging.

@@KevinVo Thanks, appreciate it.

10-32 x 1/2

@@KevinVo Thanks

They will be fixing it. It won't be for sale without it I don't think.

I'll likely make a video covering the RTV issue.

There's been 1 dude with the issue. Why blow it out of proportion?

@@ElAndresRodriguez lol...no, it's more than one dude.

I will likely be doing a video going over everything. Not sure if I'll drop my pan yet.

@@KevinVo thanks man

What don't you like about the reverse?

Nope, not visible enough.

@@KevinVo boooo 😩

Unfortunately not!

State Patrol here are sticklers about it.

It'll be available on FTspeed eventually.

I picked them up at my local hardware store, but I'm sure you could find them at Menards, Home Depot, Lowes, etc.

Could pick up the JDM one that has the light.

I don't want to have to drill into the bumper is the issue.

@@KevinVo, ticket time lol. I run mine no plate as well, but I've been lucky so far.

No, I believe those are for different functions that weren't used in this light.

@@KevinVoif you plug in just the power plug, would you still get the reverse light? Don’t care about the brake.

This will only be for the Kouki.

Not sure if it's the same one, but I just recently bought the good gun break light for my 86, just waiting for it to arrive, hopefully it looks as good as on the website

Don't have any specifics on the release quite yet.

Not currently available yet, but they'll be available on FTspeed

Home Depot: Everbilt #10-32 tpi x 5/8 in. Brass Expansion Nut Store SKU # 597800 Internet # 204276054

I just used a 10-32 rubber expansion nut I found at a local hardware store.

My wife really likes the old Pontiac Solstice, except for the license plate. It just ruins the entire look of the front end. It's too bad designers can't do anything about plate placement. Unfortunately most places require that plate.

My biggest issue is if I mount it in the middle I'll have to drill holes in the front bumper.

I can't speak for everyone else, but for me I don't want to to drill into my bumper so a relocation kit is the next best thing.

@@KevinVo Okay that make sense I'm in a state that doesn't have front license plates so Ive never really looked into why people do the onset thing.

No preorder at this time as things are still being worked on.

I don't want to drill the bumper though.

@@KevinVo toms nose!! It’s expensive tho but I love the look

I've taken that chance too many times and it hasn't worked well haha they just tell you to roll the windows up.

What do you me an F1 design?

@@KevinVo just a plain square looking one like the ones on the 370z

If I could, I'd go that route, but the state troopers here are sticklers for it.

I'm not too worried about it, but maybe I'll do a video covering it.

@@KevinVo prob get a lot of views if you did

The ones I used were 10-32 rubber expansion nuts I picked up at my local hardware store

No need to apologize! Looks are subjective and everyone is entitled to their opinion!

I'm anticipating a tail light release that would have a similar design, but we shall see.

Vo master race.

@@KevinVo where's the link for the items?

@@naldopiskal4209 not available yet.