Keyway cutting tool

Keyway cutting tool - Part 2

Рет қаралды 414,752

Күн бұрын

This is part 2 of the keyway cutting tool build.
Part 1: • Keyway cutting tool fo...
I hope you enjoy this video.Feel free to comment if you have questions or suggestions. And if you like the content, consider to like and subscribe :) Thank you very much!
If you want to support me, you can send me a coffee: paypal.me/wcdtb
00:00 Intro and recap
00:31 Connecting rod
02:09 Part for the handle
03:07 Clamping piece
03:42 New milling vise, flycutter and finishing the main body
05:37 Line boring the bushing and bushing seat
07:30 Finishing the plunger
08:38 Cutting insert holder
11:49 Finishing all parts, cold bluing
13:53 Final assembly
15:34 First test cuts
-Making a dial for Mini Lathes carriage: www.youtube.com/watch?v=8Ivp5...
-Adjustable Carriage Stop: www.youtube.com/watch?v=EpWPT... -Mini Lathe compound angle modification: www.youtube.com/watch?v=rdkoT...
-Mini Lathe tailstock fine adjustements: • Mini Lathe tailstock m...
-Mini Lathe bearings for the compound slide: • Bearings for the mini ...

Пікірлер: 162

@WeCanDoThatBetter 5 ай бұрын

Click here for part 1: kzfaq.info/get/bejne/i9eUpcJ80cWsdoU.html

@mith5168 Жыл бұрын

The build was great…BEST PART IS THAT RED KNOB! A Chef’s Kiss!

@samrodian919 Жыл бұрын

A very nice job. You should be proud of that!

@WeCanDoThatBetter Жыл бұрын

Thank you so much!

@angelramos-2005 Жыл бұрын

Excellent tool and excellent project.Thank you.

@WeCanDoThatBetter Жыл бұрын

Thank you very much!

@erlinghagendesign 2 жыл бұрын

*Talent, Fähigkeiten, Hingabe* - alles an einem Ort

@WeCanDoThatBetter 2 жыл бұрын

Herzlichen Dank für das tolle Lob!! :) Freut mich, wenn es gefällt.

@gordon6029 Жыл бұрын

I like your videos. No chitty y hat just the processes.

@WeCanDoThatBetter Жыл бұрын

Thank you very much for your kind comment. I really do appreciate your feedback!

@Pushyhog 2 жыл бұрын

may be top 5 mini’s channel on yt. And low budget too. Great channel.

@WeCanDoThatBetter 2 жыл бұрын

Thank you very much!

@artmckay6704 2 жыл бұрын

You've totally earned the name, "We can do it" !!!! Great job! I love it! :)

@WeCanDoThatBetter 2 жыл бұрын

Thank you very much! :) I really do appreciate that!

@dragosmates 2 жыл бұрын

When using a reamer, try to turn it at half the speed of your similar size drill

@schulzcbs 2 жыл бұрын

Sehr cool. Der kleine Flycutter hat etwas beruhigendes - mach doch mal Proxxon drauf aufmerksam - die finden den bestimmt auch klasse!

@mftmachining 2 жыл бұрын

Haste recht....is´n goldich Teil. Aber bloss net Proxxon......dann kostet der Cutter 300 Euronen. :-)

@BITTYBOY121 5 ай бұрын

Bravo ! - Fantastic work ! - Well done 👍 👌

@ybtech Жыл бұрын

OMG I am so making one of these. Thank you for showing how you did it. Great work even while improvising when needed. Congrats on the new tools. New tools are always so exciting. 😀 I ❤new tools. (and old tools, LOL)

@WeCanDoThatBetter Жыл бұрын

Thanks for your comment!

@orangetruckman 2 жыл бұрын

You certainly are doing better 🤘🏻

@rc166honda 2 жыл бұрын

Beautiful work, congratulations and thanks for posting.

@michaelsemenchuk3056 Жыл бұрын

I have watched a few of your vids already, but this is the one that made me hit the subscribe button.

@WeCanDoThatBetter Жыл бұрын

Thank you so much! I really do appreciate your support!

@robhillman5957 Жыл бұрын

Agree about the cutter mount grub screw, potential weak point if screw overtightened, however, a beautifully finished and very useful machine tool. Both the tool and the video presentation are a credit to the presenter.

@WeCanDoThatBetter Жыл бұрын

Thank you so much for your kind feedback! I really do appreciate that!

@robhillman5957 Жыл бұрын

@@WeCanDoThatBetter Thank you for your reply. As an old school retired engineer, with a lifelong passion for all things mechanical I greatly appreciate the fact there are others such as yourself who can make, repair and invent things and share by video with other like minded folk, hopefully to inspire a younger generation to carry on traditional skills in this "Snowflake" age. Regards R.

@WeCanDoThatBetter Жыл бұрын

@@robhillman5957 Well said. Thanks a lot!

@kyvih9217 2 жыл бұрын

Your drilling skills are superb. 0:44 I used a milling machine to drill holes one day just to be lazy, but all the holes were misaligned, and the offset and direction were inconsistent. After many tests I found out that my feed rate was incorrect and that there was still a chance to correct the bit before the taper angle was fully in the surface of the object.

@robjaimiehickford4559 Жыл бұрын

Brilliant job, if I was to make one I'd silver solder a cap threaded to clamp slotting tool. And turn bar around 180 degrees so I could see when Ive got to starting depth then dial in to complete depth.

@WeCanDoThatBetter Жыл бұрын

Hi and thank you very much for your comment! You have some good ideas. The clamping thing I didn't get I guess. How would you do it? Turning the tool by 180 degrees is a really good idea. Thanks :)

@robjaimiehickford4559 Жыл бұрын

@@WeCanDoThatBetter , where you have your clamping screw for cutting tool. Silver solder on a some round bar same size of tool bar with a tapped hole for clamping screw (grub screw). What you have will spread (deform) slot.

@LordOfTamarac 2 жыл бұрын

Beautiful tool!

@crazyfeller5704 5 ай бұрын

That is slick….

@rogerdeane3608 2 жыл бұрын

Excellent idea and another fine piece made with precision.

@WeCanDoThatBetter Жыл бұрын

Thanks!

@ParsMaker 2 жыл бұрын

nicely done , A good addition to your tools

@WeCanDoThatBetter 2 жыл бұрын

Thank you very much!

@daveys Жыл бұрын

What a great tool. Well done!

@WeCanDoThatBetter Жыл бұрын

Thanks!

@Steviegtr52 2 жыл бұрын

Good quality of work you do. Big thumbs up Steve.

@WeCanDoThatBetter 2 жыл бұрын

Thanks a lot!

@geoffwade8144 2 жыл бұрын

I enjoyed this video.

@WeCanDoThatBetter 2 жыл бұрын

Thank you very much!

@gillywild 2 жыл бұрын

Fein gemacht. Sehr schön geworden :)

@WeCanDoThatBetter 2 жыл бұрын

Dankeschön! :)

@rolandolievanoagudelo.5112 2 жыл бұрын

Fabuloso dispositivo maestro muchas gracias por brindarnos sus conocimientos 👍

@Carnold_YT 2 жыл бұрын

That worked out really well! Really clever how you use your lathe, and make tools to make new tools. As always: great video!

@WeCanDoThatBetter Жыл бұрын

Thanks!

@anuarabdulsamad2688 2 жыл бұрын

grub screw to hold the cutting insert look like a weak a point....other then that .. a very nice build....👍

@nferreira36 Жыл бұрын

I agree but from the results all I can say Is good job.

@nferreira36 Жыл бұрын

Probably still more sturdy than the actual Chinese lathe. Lol. Hopefully your endeavours pay off and all the best for the future

@WeCanDoThatBetter Жыл бұрын

Thanks:)

@WeCanDoThatBetter Жыл бұрын

Yes, this is a weak point. Perhaps I make a new clamping in the future without slotting the entire thing and making just a pocket for the cutting tool so that the grub screw has proper support. Thanks for the hint and comment!

@samrodian919 Жыл бұрын

Yes I think that should have been a hole then broached square or filed square to take the cutter.

@rickpalechuk4411 2 жыл бұрын

Great build! Nice parts fit. Thanks for sharing, Cheers

@WeCanDoThatBetter Жыл бұрын

Thank my friend!

@AgainsT1992 2 жыл бұрын

aaah what a beautiful project! Viele Grüße ;)

@WeCanDoThatBetter Жыл бұрын

Dankeschön :)

@jbaker8871 2 жыл бұрын

Really amazed the finishes and tolerance you get on mini lathe. Regret selling my lathe but can see mini lathe in my future.

@WeCanDoThatBetter Жыл бұрын

You can absolutely do some good work with it.

@charliebaileyandloganberry7557 2 жыл бұрын

Great build and fun to watch. Been a machinist for over 25 years and have done this numerous times. Can be very tiring on the lathe for sure. Only thing I would recommend if anything would be slowing your reamers down quite a bit. Would give a lot better finish and last a lot longer. I know your machine aren't the type with lots of bottom end torque, but about 50% of drill speed is rule of thumb. Anyhow, great tool and great videos. Thanks for sharing!

@ianbertenshaw4350 2 жыл бұрын

Wow that works great ! With the addition of some sort of indexing fixture on the lathe spindle you could use this tool to cut the lines on dials as well .

@kolbakolba 2 жыл бұрын

Great idea, is faster than moving saddle👍

@WeCanDoThatBetter Жыл бұрын

Yes, that might work. Thanks!

@GoldTitanium 2 жыл бұрын

Excellent ! Thanks for sharing this.

@WeCanDoThatBetter Жыл бұрын

Thanks!

@CraigLYoung 2 жыл бұрын

Thanks for sharing 👍

@yankeedoodle7693 2 жыл бұрын

Nice work. Well done.

@WeCanDoThatBetter 2 жыл бұрын

Thank you very much!

@homemadetools 2 жыл бұрын

Great work as always. We shared this video on our homemade tools forum this week 😎

@WeCanDoThatBetter Жыл бұрын

Thank you very much for sharing my work! I really do appreciate that!

@homemadetools Жыл бұрын

@@WeCanDoThatBetter You're welcome; our members love your work. Let me know if you want a free premium forum membership, and you can post your videos on the forum whenever you want. We have many YTers on board.

@chotuusian4127 2 жыл бұрын

Good work

@spudnickuk 2 жыл бұрын

Such a great idea, it beats my way by using a chuck in the tail stock and using a boring bar with cutter and sliding the tail stock back and forth, I have started to make a cam style key cutting tool that works with via an electric drill that mounts on to the tool post. Maybe an idea for a future project.

@WeCanDoThatBetter 2 жыл бұрын

Thanks for your comment! Yes, a kind of motorized attachment would be great but I think more complicated and probably much bigger, so I decided to go the "analog" way first :)

@older-wiser-better 2 жыл бұрын

Holy Moly ! Wow 🤩

@YooProjects 2 жыл бұрын

Great tool bro! I like your works 👍💫👍

@WeCanDoThatBetter 2 жыл бұрын

Thank you very much!

@mikew9292 Жыл бұрын

Impressive

@asdwee4444 2 жыл бұрын

Great video, I like how you make every part with accuracy. It would help a little if you put a gear motor with speed regulator instead of a handle. Thanks for sharing

@WeCanDoThatBetter Жыл бұрын

Thanks for your comment!

@MuntyScruntFundle 2 жыл бұрын

I'd say that works really well! My only concern with one sided cutting tools on a lathe, especially a small one (similarly with the push style knurling wheels) is the high side load on spindle bearings. I was also unsure on the grub screw, I'm pretty sure a smaller grub on the side of the shank should hold well enough if you can find a way to register the tool on the rear of your slot, shouldn't be difficult with a tapered tool. Why does technical speak always sound so smutty!

@francescoruggeri6901 Жыл бұрын

Bravissimooo

@giovaniadolfooliveira8131 Жыл бұрын

Um instrumento para fazer rasgo para chavetas. Bem complexa a sua execução, mas com um acabamento primoroso e uma criatividade invejável. Não é para qualquer um. Parabéns!

@WeCanDoThatBetter Жыл бұрын

Muito muito obrigado!!

@fordkid9472 2 жыл бұрын

Absolutely amazing

@freeride8951 Жыл бұрын

crazy! o.O finde ich echt gut!

@WeCanDoThatBetter Жыл бұрын

Vielen Dank!

@mftmachining 2 жыл бұрын

Sehr schöne Arbeit. Bei dem Werkzeugaufnahmekopf hätte ich persönlich aber Bedenken. Ich hätte eine Tauchfräsung gemacht und die Verrundung vierkantig gefeilt, zumindest die Seite gegen die die Stossnadel läuft. Für mehr Stabilität in dem Kopf. Ansonsten Top.

@WeCanDoThatBetter Жыл бұрын

Danke Dir. Ja, das wäre tatsächlich die bessere Vorgehensweise gewesen. Danke für die Anregung. So weit hab ich nicht gedacht :) Werde bei Zeiten einen neuen Halter machen. Dass man die Ecken ja auch mit der Feile rechtwinklig machen kann, hab ich irgendwie nicht auf dem Schirm gehabt :)

@werschkowdennis6533 Жыл бұрын

Bravo. Wie immer eine perfekte Arbeit. Super wenn man die Werkzeuge selbst machen kann, nach eigenen Angaben. Mann kann ja manches bestellen, nur das muss man alles verbessern. Zur Zeit ist es so, egal was kommt, das kommt aus China und das musst du immer nachbessern. Manchmal sogar Kleinteile ersetzen. So versuche ich auch vieles selbst zu machen. Du hast super Ideen. Ich freue mich jedes Mal auf neue Videos von dir. Wenn ich ein paar Fragen habe, meinst du das vielleicht beantworten kannst? Ich meine falls du Zeit hast. Okay, ich wünsche dir alles gute und bleib gesund. Dennis.

@WeCanDoThatBetter Жыл бұрын

Vielen Dank für die netten Worte! Das freut mich, wenn es gefällt :) Auch alles Gute

@rubinelemoura593 2 жыл бұрын

Ferramenta amigo muito boa hein grande abraço fique com Deus👌👊💞

@WeCanDoThatBetter 2 жыл бұрын

Grazie per il bel commento!

@jenseirikskogstad5901 2 жыл бұрын

Nice work at the keyway tool, but the grub screw to hold the cutting insert look like a weak a point. Drill a hole and use pin mill to make slot in the cutting tool holder to insert the cutting tool and the grub screw has the whole around to hold the cutting tool firmly secured without expanding the cutting tool holder.

@WeCanDoThatBetter 2 жыл бұрын

Hi and thanks for your comment! Yes, that is definitely the weak spot. For other keyway cutters I have to make a few more holders in the future. I will try to make them different so that the grub screw can not bend the part.

@jenseirikskogstad5901 2 жыл бұрын

@@WeCanDoThatBetter You can use HSS round solid shaft instead HSS square or rectangel bar and drill hole to example 5 mm hole for 5 mm HSS round solid shaft instead make slotted hole and screw firmly with grub screw. Select the diameter as you desire and grind to the desired width adapted for the keyway. It take less work to make new tool with hole instead slotted hole. There are many diameters to choose from in both millimeters and inches when buying HSS round solid shaft.

@plang42 2 жыл бұрын

Your new Proxxon mill is fantastic, these are quite expensive in Australia, you are very lucky to have it given to you 👍. One thing I have noticed is that your lathe and mill are not bolted down to anything sturdy? They seem to move around a bit? If they are bolted to a strong , heavy bench , the machine surfaces will be better 👍

@WeCanDoThatBetter Жыл бұрын

Thanks for your comment! Yes both machines aren't bolted to the bench. That would be probably better yes.

@russmilton4491 2 жыл бұрын

Very impressive to see a button insert cutting smoothly in a mini lathe. Can I ask what brand of taps you use ? They seem to cut very well is all materials & produce great results.

@WeCanDoThatBetter Жыл бұрын

The taps are Ruko M3-M12 set.

@benjaminpichai2941 2 жыл бұрын

super

@tluanem 2 жыл бұрын

Thank you and congratulations for this achievement. Could you give me the references of the three products you use for cold bluying?

@WeCanDoThatBetter Жыл бұрын

Thanks for your comment! The coldbluing is a set from Ballistol. A little plastic case with could bluing solution, degreaser spray and oil spray.

@baselfhaaa 9 ай бұрын

لكم الأحترام والشكر

@EnricoMarangonJunior 2 жыл бұрын

Great Tool !! Thanks for showing us the process and take better care of your knucles darling, there is blood around.

@wilcojuffer5940 2 жыл бұрын

Nice video👍 the next job is the drillpres table it moving a lot when you dril 😒

@paultrimble9390 2 жыл бұрын

Yes sir. 👍🏻

@grahameblankley3813 2 жыл бұрын

Very good video, how do you know it's central when you set it up?

@WeCanDoThatBetter 2 жыл бұрын

Thank you! I machined the bore in the position the tool is mounted later for operation. Thus it is automatically on centerheigth if mounted with a 2mm shim as during machining.

@pirminkogleck4056 Жыл бұрын

wahnsinn , wunderschöne Arbeit was du da mit den maschinen lieferst! das ist grenzwertige spitzenklasse! viele würden sagen ohne top maschinen ist so etwas nicht möglich ! darf ich fragen was du machst ( beruflich , wo ist dein background )

@WeCanDoThatBetter Жыл бұрын

Vielen Dank für dein Lob! Das freut mich, wenn meine Arbeit gefällt. Beruflich komme ich nicht aus der Ecke. Habe aber schon etliches an Erfahrung in diesem Bereich in unterschiedlichen Stationen sammeln können.

@SUNEELKANDA Жыл бұрын

The job you made is good one, I enjoyed the making of this video both parts.. But It could be more far better if some jobs had been done by highteck cnc machine.... As the Ellen screw on the top to fix the tool is the weakest part, I hate weak parts while tooling... The slotting done, If I've done that job i had did it in my style, I like the strongest made items, It's my way of thinking.... Grab Love from Agra India Suneel Kanda

@gordonjones1516 2 жыл бұрын

How well does it work with a drill chuck?

@trollforge 2 жыл бұрын

Awesome job! What kind of depth of cut were you using per stroke?

@WeCanDoThatBetter Жыл бұрын

Thank you. It was between 0,025 and 0,05mm per stroke I guess.

@trollforge Жыл бұрын

@@WeCanDoThatBetter thanks!

@The.Talent 2 жыл бұрын

Unnamed part I would name as pivot arm or pivot member.

@WeCanDoThatBetter 2 жыл бұрын

Thanks for your help! :)

@ThanasisThomas 2 жыл бұрын

Did you learn to use the lathe and the mill alone??

@lacaver64 2 жыл бұрын

this machine is an little proxxon mill? I see that it cutting good the little ships nice video

@WeCanDoThatBetter Жыл бұрын

Yes it is a proxxon milling machine.

@ajm76079 2 жыл бұрын

Wow. Brilliant. Do any drawings exist for this build please?

@WeCanDoThatBetter 2 жыл бұрын

Thank you very much. Not yet, but I consider that.

@nicholaszivkovic1312 Жыл бұрын

I would really like to see if this tool could be used to put a keyway into a shaft

@WeCanDoThatBetter Жыл бұрын

For keyways in shafts you most probably need a milling machine or kind of. This tool needs a free entrance and outlet for the chips of the tool. This is given when cutting keyways in holes such as pulleys, gears etc.

@nicholaszivkovic1312 Жыл бұрын

@@WeCanDoThatBetter Is it possible that you could cut a keyway only on the part of the shaft needed by first using the parting tool to put a groove before and after the target keyway location? Just a thought for something to try so that a milling machine can be eliminated from this process.

@tluanem 2 жыл бұрын

👍👍👍

@kolbakolba 2 жыл бұрын

Very nice tool🦾 If insert screw being lose, or bending try to make small titanium ring and put on tip of the rod

@fosterlewis7360 2 жыл бұрын

Why bore backwards, with the work on the tool post and the tool on the spindle?? I imagine there’s a reason I’d never seen that technique on a lathe before.

@WeCanDoThatBetter 2 жыл бұрын

Hi. That bore in the brass bushing had to be very accurate. With the cutting tool spinning in the lathes spindle I ensured, that the bore has the exact same diameter throughout the whole length and is parallel to the aluminium body and also on exact centerheight when I later use the keyway cutting tool. If I had done it the traditional way with boring bar in the toolpost and part in the lathe chuck, the bore might have turned out slightly conical and less accurate cause small misalignments in the lathes ways or spindlestock will get relevant. Hope, that is somehow understandable:)

@co1252 7 ай бұрын

Призмы станины не предназначены для такого вида инструмента и работ

@Juzzy520 2 жыл бұрын

💪💪💪👍👍👍

@user-ci2ig8kp5n 2 жыл бұрын

我在中国深圳做车铣CNC加工的，请问怎么找欧美机械加工订单？

@Canajaf 2 жыл бұрын

Ottimo lavoro ma, ritengo che la vite di tenuta del tagliente, non sia sufficientemente fissa; non so se con lavori sull'acciaio possa rimanere stabile.

@WeCanDoThatBetter Жыл бұрын

Thanks for the comment! Yes I have some doubts too about the screw. Perhaps I have to make a new one with a better more stable clamping.

@avijitDrilling92 2 жыл бұрын

👍

@gerardmontessuit7854 Жыл бұрын

👍👍👍 ❣❣❣

@user-dv9mk6qq3l Жыл бұрын

👍👍👍😀😀😀

@torno7557 2 жыл бұрын

Dónde lo compro

@TheZzziggy 2 жыл бұрын

You would be much better off using DIN7991 inbus screws rather than DIN912 ones for the toolpostclampingthingypart (or a handle as you have very well put it in English).

@WeCanDoThatBetter Жыл бұрын

Thanks for the feedback. I consider that. As I'm no native english speaker, I hesitate to speak ;)

@TheZzziggy Жыл бұрын

I don't have a native Deutsche Sprache either, as you could have already noticed in my accent. Thus, we're even! But that doesn't stop me from making fun at germanwordmakingapproach - so neither you should hesitate to speak English. Just get it check with a dictionary - or better yet, vocabulary - more often than not.

@Pushyhog Ай бұрын

this is a movie , not a video.

@nadersadeghmohammadi2721 Жыл бұрын

👋👋👋👋👋🌹🌹

@BruceWSims 5 ай бұрын

I suddenly had an overwhelming desire for a cigarette.......😅

@Hitman-ds1ei Жыл бұрын

Why wouldn't you just use broaches ??

@WeCanDoThatBetter Жыл бұрын

Broaches are very expensive and you need a set for every size you have to make. This tool is much more versatile as you can easily made new cutting bits in the desired size.

@shivrajchavan3073 Жыл бұрын

Ms cutting

@AndySomogyi Жыл бұрын

Those magnetized steel slivers on the mill are SOOO ANNOYING, happens all the time with my mill.

@WeCanDoThatBetter Жыл бұрын

Oh yes, that's really annoying :)

@strongspeed 2 жыл бұрын

be better if you narrated it instead of captions

@yak-machining 2 жыл бұрын

Can we use it on women too?

@Cz9mmp10 Жыл бұрын

Please talk so we can understand what's going on

@WeCanDoThatBetter Жыл бұрын

hm, I consider it. But as I'm no native english speaker I hesitate to do narrations.

@mrCetus 2 жыл бұрын

@kyvih9217 2 жыл бұрын

I don't understand why the oil groove for the brass bushing is on the outside and not the inside, that oil filling port means you will be using a paste lubricant, right? Does the lubricant run off easily?

@WeCanDoThatBetter 2 жыл бұрын

Hi and thanks for your comment. I will use oil for lubrication not grease. There are oilpumps for the fitting I used here. I didn't make it that clear in the video: The oilgroove is on the outside of the brass bushing so that the oil filled in can flow on the outside of the bushing around and enter on two points through little holes into the bushing and lubricate the plunger. I made these two holes off camera. But oilgrooves inside the bushings were also good, I will add them.