Nice work on a dificult build. Thank you for taking the time to show all the challenging parts, learned a lot. That bead on the top doors was quite a clewer solution
@KingPostTimberWorks5 жыл бұрын
Thanks , I hope to give at least some small ideas for viewers own projects.
@edinico725 жыл бұрын
I like your videos because every time you make a mistake, you show us what happened instead of blinding it. everyone must learn from their mistakes.
@riskra5 жыл бұрын
I really enjoyed this video! That's what I call proper woodworking and installation.
@kendrury91085 жыл бұрын
The look on your face after the center piece dropped in was priceless! Major relief. Great job on another great build.
@dennisleadbetter77215 жыл бұрын
Those dummy grooves are a valuable tool to use. Built ins that don't allow any tolerance to accommodate out of square or level/plumb can be a nightmare. very few buildings are ever built that accurately.. Same as the build up on plaster joints, especially in corners. Nice job.
@ladykay84 жыл бұрын
I am in lust with your large table saw!
@AlbertinhoVigo4 жыл бұрын
I like the fact that you show the mistakes you do, because this things happen to everybody, and I find it quite interesting , because this is also part of the construction process. Lovely project, nice design, good making, and I like the grooves you have made on the back panel with the table saw,it gives the whole piece a lively detail.
@KingPostTimberWorks4 жыл бұрын
Thank you
@heresmyurl5 жыл бұрын
I feel like every video "I'm Joey and this is my new, random, and super awesome jig". It's great
@johnhorsfall32815 жыл бұрын
Very smart unit Joey well designed very good joinery
@KingPostTimberWorks5 жыл бұрын
Thank you
@julianlech85055 жыл бұрын
Great design and build. The Lamello tool is very slick.
@KingPostTimberWorks5 жыл бұрын
Cheers
@annverleedowns3115 жыл бұрын
Very nice project , nice job on the attic access astatically pleasing solution. Nice drawer kits they look nice with a modern design and a time saver.
@jbb54705 жыл бұрын
Another beautiful piece Joey! I really enjoy watching a true craftsman through this process. Great video as always!
@petereyre51885 жыл бұрын
Great final product. Looks like you have an awesome workshop and a beaut tablesaw! Great vlog. 👌
@thomaaz5 жыл бұрын
Looks super, and all "problems" very well tackled.
@PassionforWoodworking5 жыл бұрын
I'm a fan of traditional woodworking but in the name of the trade that Lamello is pretty sweet for efficiency. Nice build.
@KingPostTimberWorks5 жыл бұрын
Yes I'm a bit the same . Then when you realize how damn fast and effective it is......
@clydedecker7655 жыл бұрын
Loved this build Joey. Its a tribute to your skill at handling tricky installs and prior planning (except for the good of measuring to the inside of the grooves, of course Life happens! 😄) Great solutions.
@KingPostTimberWorks5 жыл бұрын
Thanks!
@AndreaArzensek5 жыл бұрын
Fantastic job. I like seeing how you work and think about solving problems.
@nathansilver91905 жыл бұрын
Great job Joey, I'm always so glad when you come out with a new video. 2 thumbs up.
@KingPostTimberWorks5 жыл бұрын
Cheers
@IEnjoyCreatingVideos5 жыл бұрын
Nice work on the cabinets Joey! Thanks for sharing the video with us.😎👍JP
@nicholasfranklin92185 жыл бұрын
You make some really nice stuff. I really enjoy that you show the entire process including any mistakes. It is really inspiring to watching you work. Thanks Again for another wonderful video.
@KingPostTimberWorks5 жыл бұрын
Thanks, I hope to help in some small way to whom ever is willing to watch .
@markarmstrong25925 жыл бұрын
Looks great Joey a clever way to leave space to get into roof space
@KingPostTimberWorks5 жыл бұрын
Cheers!
@TwistedWorkshop775 жыл бұрын
Great work. The finish on your projects always look amazing!
@ze_ep5 жыл бұрын
Wow, small tolerances. Respect!
@denty325 жыл бұрын
Very nice, and a beautiful paint finish
@castolum5 жыл бұрын
Amazing cabinet making skills!!
@manuelcalvillo46605 жыл бұрын
Great work and project!
@KingPostTimberWorks5 жыл бұрын
Thanks
@phalimmaguire60695 жыл бұрын
Lovely job yet again , you make it all look so efortless thanks for sharing.
@a6cjn5 жыл бұрын
Nice work - well thought out and made. Chris
@omnibuildersnz5 жыл бұрын
Very nice I like the hidden fasteners !!,nice touch love the detail. Man that big slider on your table saw is wicked makes work like that a cinch I do that stuff with a guide rail saw works great just a little more time 😅👍
@sanjaysami43155 жыл бұрын
Fantastic job as usual Joey ! Great video and explanation as well. Thanks for sharing !
@LonghornWorkshop5 жыл бұрын
That was outdtanding, love the colour.
@CCSandSonsWorkshop5 жыл бұрын
What a beautiful project! Nice craftsmanship too! Cheers.
@KingPostTimberWorks5 жыл бұрын
thanks !
@Fredatbedrock5 жыл бұрын
Turned out great looks awesome
@bradleyvuglar77835 жыл бұрын
awesome idea on the V GROVE with the table saw. going to make the most of the now!
@harrygirgin90935 жыл бұрын
Looks great mate.
@pavlo04125 жыл бұрын
Awesome video Joey ! Always amazed at how good you are .Thanks again
@KingPostTimberWorks5 жыл бұрын
Cheers
@afzulali76955 жыл бұрын
Brilliant as ever you make it look so easy. Thank you for the video.
@KingPostTimberWorks5 жыл бұрын
Thanks for watching!
@luket46785 жыл бұрын
Awesome work, Joey!
@hernanenrique57005 жыл бұрын
Muy buen trabajo, Saludos desde Bahia Blanca Argentina.
@paulliddell25175 жыл бұрын
Absolutely superb work mate 👍🏼👍🏼👍🏼
@reforzar5 жыл бұрын
36 mil isn’t too bad 😂 Thanks for continuing to show mistakes. 👍🏻
@jimwatchorn43635 жыл бұрын
Thanks Joey, another brilliant video typical of your channel
@KingPostTimberWorks5 жыл бұрын
Thank you
@stephenjimenez95395 жыл бұрын
Very nice. Just a suggestion, because you said you wish you could use plywood but because of the painted finish you used MDF, maybe next time you could look into MDO. it's plywood with an MDF veneer. I love working with it for paint grade builds.
@KingPostTimberWorks5 жыл бұрын
Hmm yea I have seen that but not actually seen where I can get it. I'll make a note. Cheers
@pattymcfatty15 жыл бұрын
Great video mate. I'd like to see you keep doing them for many years to come so can you please use some dust extraction?!! Especially with that MDF death dust
@grant32265 жыл бұрын
Damn it, now I "have" to buy a Lamello...
@benchippy80395 жыл бұрын
Lister Furniture that limello is so cool, you know if you had one everything would need a clamex joint!
@Etna.5 жыл бұрын
Yeah, me too! Love the Clamex since I've seen them on this channel the first time. But for money reasons I am limited to the S type that doesn't need the special groove. Still a great system you can do a lot with. Great build by the way! Loved the hole process and thinking involved! Man, I need to film more, but everything takes so much time then... Regards, Etna.
@Bill.L.Carroll5 жыл бұрын
Fantastic job, mate. 👍
@noeraldinkabam5 жыл бұрын
Awesome piece of work!
@KingPostTimberWorks5 жыл бұрын
Thanks
@ToffeeApple5 жыл бұрын
I am seriously considering flying you to the UK to build my house!
@KingPostTimberWorks5 жыл бұрын
Done
@kuffyswoodwork5 жыл бұрын
Looks great mate. A job done well!👍
@KingPostTimberWorks5 жыл бұрын
cheers man
@rodmackinnon84975 жыл бұрын
Man oh man that was a complicated project . . . no slop measurements there . . . by the way them facings your snapped in place, can they also be popped off again? Loved you showing the wrong calculation in the early assembly, we know that happens in every workshop. Looks amazing, the wood and paint combination was perfect.
@KingPostTimberWorks5 жыл бұрын
Thanks! Yea those clips do un-clip but are designed as clamps while glue sets. So repeated clipping will loosen the holding power eventually
@ElibomKeeg5 жыл бұрын
The Galaxy S10 has a wide angle lens that would make taking full pictures in the tight space a breeze
@TakamiWoodshop5 жыл бұрын
Hola Joey, tu Español es muy buena. Enjoyed this build heaps - cheers mate.
@DominicGiles5 жыл бұрын
Great job... looks amazing. But the tool bar in Sketchup (0:50) is killing me...
@juniormattos24485 жыл бұрын
Joey, where are you, man? I'd like to watch your videos. Your videos are amazing... Congratulations from Brazil...
@billbaker49705 жыл бұрын
Very nice work.
@Papa_D5 жыл бұрын
Wow ... perfection my friend !!! :-)
@DimDuma4 жыл бұрын
Очень здорово сделано!!!
@RI-uv3lm5 жыл бұрын
👌👍 great ... as always
@GuysShop5 жыл бұрын
Nice. I have a Zeta P on order. Hopefully within the next couple weeks it will land at my door.
@KingPostTimberWorks5 жыл бұрын
Thanks Guy, nice one ! It sure is a new way of thinking and problem solving.
@fab28324 жыл бұрын
The mann bro!
@mfcosi5 жыл бұрын
Wow! Amazing
@skillstacking5 жыл бұрын
Dude your great!!! Keep it up.
@richardpellis5 жыл бұрын
Will you update the post and include information about the feet, the drawer hardware, and hardware that you used to attach the face frame and units together. I've never seen the face frame hardware before.
@jayfuller74695 жыл бұрын
The drawer hardware looks like Blum or some knock-off, the feet look like Desunia. The detachable face frame and joining hardware is Lamello Tenso and Clamex. It uses a special biscuit joiner, Zeta P2, that slots the bottom of the biscuit cut and costs about $1700 USD.
@paulmcgeoch26035 жыл бұрын
Scotia....we call that coving in Scotland 🏴 U.K
@edvickery9585 жыл бұрын
It's crown moulding here in Canada.
@TheLindsay7205 жыл бұрын
I think we call it cornice in Australia.
@kenmarapese90855 жыл бұрын
Very nice!
@popolvuh32944 жыл бұрын
the cabinet is really fit with the space, how you guys able to do that....it is really amazing
@stevehubner5605 жыл бұрын
i get it it looks great and love the work around for the manhole !
@KingPostTimberWorks5 жыл бұрын
Cheers
@jimkirkland48295 жыл бұрын
Nice work
@hans11635 жыл бұрын
👍
@SimopsAus5 жыл бұрын
Excellent job as always!! I’m sure the customer is thrilled. Would it be possible to add in your comments section a list of the products you use, like the paint, hardware, etc...? Not sure if that is a copyright violation but it would be great to know what you use..... Cheers
@KingPostTimberWorks5 жыл бұрын
Hmm yea I could probably update that next week sometime
@lindsayriddick1705 жыл бұрын
Great project. That spray gun looks awesome. What brand model is it?
@KingPostTimberWorks5 жыл бұрын
It's a Graco ultra . This model only does water based paint. They have another one to do spirit based finish too.
@leighmillar54695 жыл бұрын
Awesome project Joey!! Excellent design that really utilises the available space. one question what tip size do you use in your graco?
@KingPostTimberWorks5 жыл бұрын
Um I cant remember exactly I'm sure it is the second to smallest
@christofix5 жыл бұрын
8:58 That is a cool way to connect those cabinets. What is this called and where can you buy these. The result is very beautiful, congratulations on this one
@KingPostTimberWorks5 жыл бұрын
The tool is a Lamello zeta P2 the cam connetors are called clamex p14 ie 14mm deep. And the clip on connectors are called tenso cheers
@calivalley90565 жыл бұрын
That "V" grove trick is awsome, not a fan of off the shelf MDF bead board but this is looks great and would be a good replacement. What paint sprayer are using?
@KingPostTimberWorks5 жыл бұрын
Cheers, it's a Graco ultra, pretty good unit really.
@CrustyCurmudgeon5 жыл бұрын
First time seeing one of your videos: so jealous of your saw - wish I had room for something like that. Question: the whole slide/drawer system - where does that come from? Never seen that hardware solution before.
@1979thevoice5 жыл бұрын
Did I hear Joey swear???? 😅 nice work as always 👍
@KingPostTimberWorks5 жыл бұрын
Ha yup!
@AKGatesway5 жыл бұрын
Hey Joey, Love to see your vids appear...they are always super instructive. So, sometimes you drill/screw the MDF, others you staple. Why? Also, what length of screw do you use for 3/4” to 3/4” connection? What # screw? What diameter bit to predrill? Thanks!
@KingPostTimberWorks5 жыл бұрын
So I only use pins to attach the backing . Joining 2 18mm panels I use a 8g 32mm screw. For general cabinets I use 40mm screws generally 8g but I have been playing with 6g too. For 8g I used a 3mm bit and 6g 2.5mm bit. Cheers
@bradbusch95855 жыл бұрын
Very nice
@MolsonPeanut4 жыл бұрын
What color is that gray? What brand? Looks awesome
@tomthumb16715 жыл бұрын
Hi Joey , love this video mate , I love the painting section of the cupboard instead of sending to a Spray polyurethane guy, which cost a packet to have sprayed and all your videos usually are painted with the pad by hand ? . Can you guide me , What is the spray gun you used ? and what was the paints and what would you recommend eg, primer to top coat ( Acrylic o a oil or polyurethane as the top coat has a good gloss straight from the gun)
@KingPostTimberWorks5 жыл бұрын
I'm using a graco ultra sprayer, it's ok. Does what it says but I'm not sure how it will last. I use resene paints and primers and prefer their lustacyl semi gloss as my go to. Depending on the project depends on the clear coat method. I often use a brush pad for water based polyurethane. Or rag on thinned down oil poly or Danish oil etc.
@moosewerk3565 жыл бұрын
Those drawers would be perfect for my kitchen cabinets! Where did you get them?
@knuckles30074 жыл бұрын
I really enjoy your videos, what are the metal drawers you use?
@RossWilliamsDC5 жыл бұрын
Wonderful build. I’m getting ready to approach a very similar project and appreciate your timing. Could you mention who makes those drawer slides you used?
@KingPostTimberWorks5 жыл бұрын
The make is Harn, but many others make the same thing, blum for eg
@MrBim103 жыл бұрын
Great job, I was wondering, what was the spray gun? And was it a Dewalt battery. Thanks
@KingPostTimberWorks3 жыл бұрын
It's a graco ultra
@danbarrett61135 жыл бұрын
Pro Joe
@bigboper1114 жыл бұрын
hey joey nice job love the work you do can you share info about the paint gun you were using thanks man
@KingPostTimberWorks4 жыл бұрын
Yea it's a graco ultra
@bigboper1114 жыл бұрын
@@KingPostTimberWorks thanks
@bodhi2005 жыл бұрын
Great video! How do you fix the scribe pieces on the sides, tops and front of the gables?
@peterkiernan16685 жыл бұрын
Great video, the plastic legs( what is the name of them), is there a jig for there installation or do they just screw in.
@bcharlie89395 жыл бұрын
nice video as usual! whats the spraygun you are using? grtz, charlie
@KingPostTimberWorks5 жыл бұрын
Its a Graco ultra. Cheers
@jasonadams6442 Жыл бұрын
What was the painted finish. It looks great
@kuchi2145 жыл бұрын
Yes. New video
@herbertthecat3 жыл бұрын
Very nice install, apologies if it has already been asked, but what kind of spray gun are you using there?
@KingPostTimberWorks3 жыл бұрын
It's a Graco ultra
@herbertthecat3 жыл бұрын
@@KingPostTimberWorks Thanks for your superfast response. Davin UK
@MrHoutant5 жыл бұрын
Excellent job!!!! How long dd the complete process take? It has so many great and well thuought details!!
@KingPostTimberWorks5 жыл бұрын
Thank you! It took about an hour to make my shop drawing . The build was about 7 days and 3 half days to install. Including travel time etc.
@MrHoutant5 жыл бұрын
@@KingPostTimberWorks You are a master!!! so efficient and high quality results!!!
@edvickery9585 жыл бұрын
Great work Joey. I have to ask, why the chicken wire in the ceiling of your shop?
@KingPostTimberWorks5 жыл бұрын
Ah because of the low roof pitch, the paper needs support to stop it sagging. That's the official reason anyway.
@deevpavel4 жыл бұрын
Круто!!!
@dalebrown19815 жыл бұрын
Looks great! How do you like the sprayer..?. What kind of paint are you shooting, and how do you find it levels out..? Thanks!
@KingPostTimberWorks5 жыл бұрын
Sprayer is fine, it can be a little drippy but mostly good. I would probably go for the smaller corded airless in hindsight however so far the finish is perfectly acceptable. I'm just using resene lustacyl semi gloss. Water based enamel. Cheers
@patrickniedermeyer21125 жыл бұрын
@@KingPostTimberWorks with what tip size and pressure setting? I've got the Graco Ultra Max and have had great luck with the 310 tip at 2.5 pressure using lacquers. No drips, as long as I clean my gun properly everytime.
@bufford145 жыл бұрын
What kind of paint sprayer is that? That's the way to do it for sure.
@KingPostTimberWorks5 жыл бұрын
A Graco ultra
@kenkorba54265 жыл бұрын
What kind/brand of drawer assembly hardware do you use? And where would one be able to acquire it?
@KingPostTimberWorks5 жыл бұрын
The brand is Harn. I get them in new Zealand from Fit-NZ.co.nz
@kenkorba54265 жыл бұрын
Thanks! @@KingPostTimberWorks
@patrickniedermeyer21125 жыл бұрын
Is Harm an off-shoot of Blum? They very much look like Ikea's drawers, which I belive are a Blum product.
@ragstir5 жыл бұрын
How you getting on with the Graco Ultra , I had a mare with mine start to finish, sold it before had any more problems with it , glad I did alot of people here in UK having problems with them , pump broken etc etc
@KingPostTimberWorks5 жыл бұрын
It's ok...... pump so far is fine. Biggest problem for me is I tend to get an air leak into the paint pot then the finish is all up the shit and that piece needs to be done again... also cleaning it sucks, but is probably better than cleaning a proper airless hose...
@marcohaefner16445 жыл бұрын
Very nice! May I ask if this was a 2K colour you put on as a top coat?
@KingPostTimberWorks5 жыл бұрын
Have to be honest, behave no idea what a 2k colour is. I use resene lustacyl as my go to paint
@marcohaefner16445 жыл бұрын
Oh I'm sorry I meant a 2 components colour. I sometimes used waterbased lacquer and that stuff comes right off the wood after a few bumps. Thank you very much for the inspiration! Greetings from Germany!