Kingsong S18 Repair - Replace EUC Bearing / Grinding Noise

No video

Kingsong S18 Repair - Replace EUC Bearing / Grinding Noise

Рет қаралды 3,038

2 жыл бұрын

In this video I'd share the way I replaced my Kingsong S18 bearings. The bearings apparently start to produce some grinding noise. Turns out it caused by rusty ball inside the bearing.
I replaced mine with NTN 6203ZZCM which has zinc cover rather than rubber seal used on original S18. But you could use any other bearing as long as it coded 6203. Look for it's datasheet if those bearing could support your weight.
This is only the way I've done it. If you want to follow it Do It at Your Own Risks. If I done something wrong or mislead information, do send me your thought in the comment.

Пікірлер: 20

@DumbThumbsFPV Жыл бұрын

as an electric motor mechanic and rewinder... NEVER use a shielded bearing on these electric unicycles!!! The double sealed 6203LL was much better as it's sealed!! That shielded bearing will last maybe 1/4 as much as the sealed one it had.

@erichps8124 Жыл бұрын

Thank you for that information. I have to admit that I possess little to no knowledge about bearings. Do you mind sharing with us why sealed bearings is better than shielded bearing for this euc? Is it able to provide more protection against dirt or other contaminants? Honestly, I used 6203zzcm zinc because that's the only 6203 that I could found in my local store and it said it had less friction. Nevertheless, to all viewers of this video, I'll leave the choice of bearings type to you. As long as it is 6203.

@DumbThumbsFPV Жыл бұрын

@@erichps8124 The sealed bearings are better because they are sealed from dirt and dust. Shielded bearing are not. What I find weird is how KingSong and others don't use a bearing retainer and oil seals on their main bearings as these things would make it possible for the bearing space to be grease packed like a wheel bearing on a car, motorcycle,trailer,bicycle... A 6203 bearing is just too small as well for this kind of weight. They could have easily used a 6304LL or 6305LL and that would have been much better. A 6203 is a very small bearing size used for light weight rotors in small motors.

@emaginthat169 Жыл бұрын

Thank you i just ordered sealed bearings for my kingsong

@jeffreytong Жыл бұрын

@@DumbThumbsFPV Thanks for the insight. Does the SKF 6203-2RSH work?

@milordas Жыл бұрын

@@jeffreytong yes, they will. 2RS means double sided rubber sealed, H means for heavy duty

@PeterPanoramics 3 ай бұрын

I used 2 claw hammers to gently prize the disc cover plate off, more controlled

@user-eq1sj9es3x 8 ай бұрын

Поставил не герметичный подшипник .Нужно 6202-2rs с пластиковым пыльником.

@ssjgogetta Ай бұрын

Seeing how the sausage is made.

@milordas Жыл бұрын

i would regreese those bearings with vacuum method with some marine grease. As rotation speed is not so fast, bearings should be full of grease, not half of them.