HI Eddie, thank you for an awesome comparison video. Nice shirt and supporting your brother-in-law.
@KissAnalog3 жыл бұрын
Thank you! I appreciate you!
@wingerrrrrrrrr2 жыл бұрын
A significant improvement in the 208 from the 206 is the addition of a range hold feature. That allows min max readings to be made which will just over range on the 206. Also makes for much quicker measurements when doing a repeated series of measurements in the same range. Gets annoying waiting with the auto range lag each time you connect up, when you have no option to select a fixed range. Aside from the display, which is better on the 206 series, and maybe the larger size, the added value from the 208 is definitely worth the extra cost. Better probes, higher speed, range lock etc make it fully capable. On the 208D that I've got, the DCV accuracy was surprisingly on the mark, with a 0.006% error measured through a range from zero to 110V. Only real complaint I could come up with is the min max feature doesn't have a display for the ongoing readings; it can only display the min or the max. If you want to use the mode to continually monitor voltages while just catching any spikes that it comes across, it can't do that. I was surprised they forgot to include that, with every other thing about it so well done. Well, maybe also the display, which is actually a downside compared to the traditional LCD display. The reverse display is pretty hard to read in sunlight without a lot of hand shielding and fussing about getting the right angle on it. If they stuck with the old 206 display type and just ditched the timeout on the backlight, it'd be aces 👍.
@ausmartin13 жыл бұрын
Excellent comparison video, just what I was currently looking for pardon the pun 😉😎
@KissAnalog3 жыл бұрын
That's great! Thanks for the feedback!
@Nermash3 жыл бұрын
Thanks Eddie, great video!
@KissAnalog3 жыл бұрын
Thank you - I appreciate you!
@madrussian4252 Жыл бұрын
really appriciate your work you put into this video
@KissAnalog Жыл бұрын
Thanks so much!!
@noneofabove558611 ай бұрын
Very nice, thank you. I think I will go for the 208D.
@KissAnalog11 ай бұрын
Great - I think that is a good choice. If you go to the Kaiweets store (you can use the link in the video description) there is a 15% discount using the code KA15. I find this works in conjunction with other sales or discounts.
@Vodzoo6662 жыл бұрын
Excellent video. Thank you so much! I was looking for a meter for myself and couldn't decide until I've seen your review. You've covered all the details in this video and in the other one about the HT208D too. All the features were explained and tested and no shortcuts were taken. I decided to buy this HT208D thanks to you.
@KissAnalog2 жыл бұрын
Thank you for the great feedback!! I think that is a great meter. Let us know how you like it;)
@veracity91 Жыл бұрын
how is it holding up? 😬
@TRONMAGNUM20993 жыл бұрын
Well all the promo codes were used up. I do love Kaiweets products. Their products feel well-built. I just moved and have been using my Kaiweets outlet tester to make sure everything is wired in correctly, and it works great.
@KissAnalog3 жыл бұрын
Thanks for letting me know. I will check with Kaiweets to see if there was a problem. I’d be surprised if people actually used them that fast. I can’t even get that many responses when I give meters away - let alone when I make it a challenge;) I usually have to wait several weeks to get a few emails asking for the free meter. And I don’t usually get spikes like that at Amazon. This would be a first;) I’ll check and get back, plus I think that they were giving me new codes for cases.
@Domnu.3 ай бұрын
I oscilated between ht208 and ut207B. I choose uni-t ut207b because it is etl intertek certified. I have LoZ, inrush, min/max, lpf but not temperature. It is cat3 1000v/ cat4 600v, 6000counts. I hope you wil have it for a video.
@KissAnalog3 ай бұрын
Fantastic clamp meters - especially at the price. Did you see this video: kzfaq.info/get/bejne/eZ-enJeQx7LUgmw.html
@milwaukee_69 Жыл бұрын
My eui 579 is a great meter for what it is good for hvacr trade and electric field
@KissAnalog Жыл бұрын
Thanks for the feedback! I have always wanted an UEi meter, and I think I have one still but can't find it right now. Great meters from a family owned business.
@ats891173 жыл бұрын
I purchased the HT208A just for the $29.28 delivered price, but since I do a lot of audio work, I'm always interested in a current clamp's frequency range. Most are only for line frequencies. I've purchased some Micsig current clamp units for high frequency work and I'm guessing that the Kaiweets won't go up very far, but for $29.28 it will still come in handy.
@KissAnalog3 жыл бұрын
Wow great price! That Micsig is a great higher freq probe. The Kaiweets will be great for line powered projects!
@bobomomo37642 жыл бұрын
It doesn't have DC options right? HT208A On aliexpress the picture says it has both AC and DC, that picture didn't look legit to me
@bangharsin8122 Жыл бұрын
What are the advantages & disadvantages of HABOTEST 208D
@KissAnalog11 ай бұрын
I think you mean the Kaiweets 208D - right? This is a fantastic clamp meter that has both AC and DC current measurements, but it also does inrush current, and has LowZ - as well as a great display. I'll do a shoot out for clamp meters here soon. Here's the link to amazon, but if you go to my description and go to Kaiweets - you can use KA15 for the discount: amzn.to/3P5C2lD
@alexivanov2891 Жыл бұрын
Thanks for great review, I've found many answers. 16:08 The cheapest HT200B turned to be fastest and most accurate at low AC currents. It is the only measured exactly 0.266A same as reference multimeter without any delay. Priceless feature for Differential Current Protection unit testing and especially AC-leak identifying and troubleshooting. Next in line is HT206B which adds 6000 counts, MIN button, LoZ, LPF and USELESS temperature measurenent (BTW who ever use it ???)
@KissAnalog Жыл бұрын
Cool, thanks! Use the link for discount: Get 15% off; use KA15 code at Link to Kaiweets store: kaiweets.com?sca_ref=1269738.glN6S8aePH
@bernielhat9155 Жыл бұрын
Every video I see in reviews and comparing is they all seen to avoid capacitance testing with the large run start capacitors from or for HVAC SYSTEMS,
@KissAnalog Жыл бұрын
Great point!! I'll have to add that. Thank you!
@hullinstruments3 жыл бұрын
Quick question… are most of the modern budget multimeters made by the same manufacturer? And then stamped with a different brand names? Because I’v noticed There are many meters, from a wide range of brands… But many of them look identical. Why is that? There are dozens and dozens of models with many different brand names, and many look identical. For example, the Aneng ST209 is identical to…. -mustool X1 - winapex 8202 And others Other brands included including kaiweets, bside, uni-t, habotest, voltcraft, and others. Wondering if anyone can shed light on this topic, and verify if they’re all made by the same manufacturer, with varying levels of quality control?
@KissAnalog3 жыл бұрын
This is a great question, and it would be awesome to see some answers to this. I can tell you that it is not just the lower cost units that are rebadged. I have a Tektronix power supply that is made by GWInstek. It goes even further than that as some manufacturers will have their high-end equipment made in the US and their (what should be low cost) lower end units made in China or other countries. Not saying any of this is bad - if the cost savings is passed on to the customers. I do think that Habotest might be the manufacturer of the Kaiweets multimeters. Power supplies are probably made by someone else. I think with Kaiweets, they have a name and sell a lot of equipment, so they have to keep a level of quality to keep the level of expectation for the cost a plus for the consumer - or they will be replaced by another brand. But they seem to be doing a good job.
@wingerrrrrrrrr2 жыл бұрын
@@KissAnalog if there's additional screening by Kaiweets with a warranty period, it might be a good consideration for any price difference with Habotest, if they are sold without warranty support.
@AzfarHashmi Жыл бұрын
Unit 208b or kaiweets 208d?
@Onkel.Moetrik Жыл бұрын
Hi Eddy Is it possible that you can test the amp function on the 206? In the low DC region. I have the Habotest 206D, and when I use the clamp in DC mode, it is far out! The accuracy is way off. When the load is 1.7 amp the clamp measure about half. This should be a lot better I have another Noname clamp meter, a bigger one, and this one measure all right even in the low region. I suspect that the challenge for these meters are in the low region, DC. I guess they are not really made for this? Onkel Møtrik
@KissAnalog10 ай бұрын
Great question! Many of these are rated to read very high current, so the low range is like 60 Amps. This makes for poor resolution at smaller currents. The question is - how small? There is also a technique to get a better reading. I showed this in an earlier video - but I can't even remember which one it was;) I'll do a video this weekend to show this;)
@hullinstruments3 жыл бұрын
Where did you get the PCB roller and semiconductor sample boards? I have a looked online and I can’t find it.
@KissAnalog3 жыл бұрын
Thanks for the question! I was given these by reps who I met with on the job. I've collected a few over the years. I wish I had kept them and collected them:) I'll check with some reps to see how we get them. It would be cool to give them away;)
@khybersafi91373 жыл бұрын
In your opinion, would you say the HT208D is the best bang-for-buck clamp meter out there when it comes to price/features or do you prefer something else? Thanks.
@KissAnalog2 жыл бұрын
Great question! Thank you! I do think it is hard to beat! I have a few meters that I purchased and will do a shoot-out very soon;)
@khybersafi91372 жыл бұрын
@@KissAnalog Awesome. Correct me if I'm wrong but the HT208D doesn't have micro amps DC correct?
@wingerrrrrrrrr2 жыл бұрын
@@khybersafi9137 you're correct 👍
@TYGAMatt3 жыл бұрын
Off topic for a sec. Thinking of pulling the trigger on a Hantek CC-65, but a little worried about the frequency limit. Thoughts? Maybe the CC-650 is a better choice? Budget is not huge. Or any other suggestion?
@KissAnalog3 жыл бұрын
Great question! Between the CC-65 and CC-650, I think it is a choice of current ranges and what you need there. I chose the CC-65 thinking that I don't need the higher current and I wanted better low current readings, and I thought 20kHz was not bad for the low cost. Have you watched my vids on the CC-65? What freq range do you want? The Micsig is more expensive but a very nice and wide bandwidth probe. Here's the link the the video: kzfaq.info/get/bejne/qKldhpuIycy7YJs.html CC-65 link:amzn.to/3wB5Yuz Micsig CP2100B link: amzn.to/3wDf4qu Micsig CP2100A (lower cost but 800kHz): amzn.to/3euEj8z Let me know if you have any more questions and which you decide on;)
@TYGAMatt3 жыл бұрын
@@KissAnalog Hi Eddie. Thanks for the links. Yes I've seen your vid on the CC-65. I'm looking to probe on dc to dc converters as they're fascinating, but the step up I just made (first ever successful boost converter) is running at 100kHz, so maybe too much for accurate readings in the CC-65. I'll have a rethink. Maybe I'll just have to string a yarn to the wife that I needed both in the interests of saving the world from climate change.... Or something like that! ;-)
@TYGAMatt3 жыл бұрын
Hantek cc-65 just arrived. Excited to try it out when I get a moment
@KissAnalog3 жыл бұрын
LOL I forget if I've used the CC-65 on one of my boost videos... I'll try it on my next buck regulator video;)
@TYGAMatt3 жыл бұрын
@@KissAnalog well, just the first preliminary test looks positive. Measuring a 3V DC reference with a 3mA load and it's reading 3mA. Good start I suppose. :-)
@ats891173 жыл бұрын
Thanks. Do you know the frequency response?
@KissAnalog3 жыл бұрын
Thank you! Great question, but are you referring to the voltage or current, or are you asking about the low pass filter?
@georgedavall94493 ай бұрын
I know I know, late comment here. Kiss Analog is electrifying !!!!!!!!!!!!!!! 🤩 😆👍☺
@KissAnalog3 ай бұрын
Thanks so much! Never too late;)
@georgedavall94493 ай бұрын
@@KissAnalog You alright, Eddie, ya know! 👍
@leonguyot49913 жыл бұрын
I already have one of their Digital Multimeters HT112B, and am so impressed with it, I've just ordered an MT208D
@KissAnalog3 жыл бұрын
Thanks Leon for this great feedback! Let us know how you like it:) I think its a nice meter.
@wingerrrrrrrrr2 жыл бұрын
37:53 are the prices backwards for the 206A and 206D there, or is the 206A something like a collector's item?
@kilner79 Жыл бұрын
wow i notice you reply to all comments or do your best im looking for a clamp meter that will do very low ac dc and also frequancy but it must be able to do teh frequancy with the clamp as i only have acess to what i need to messure with the clamp i cannot get any acess to teh actual componants without detroying the item i need to to do 5khz to 50khz more than the max and less than the minimum is an advantage could you please offer some advice please as im finding it hard to find what i need and some are very exspensive thank you
@KissAnalog Жыл бұрын
Thanks so much! The problem with most current clamp type multimeters is that they are meant for 60/50 Hz power system measurements. You can get a relatively inexpensive current clamp that will work with your multimeter - given it will read the higher frequencies. Here's a video on teh clamp: kzfaq.info/get/bejne/jqmSoq2fzMm2Zok.html A relatively low cost but high-end multimeter that can do this would be what I show here: kzfaq.info/get/bejne/j66lrJWBvrTVZmw.html
@MrRubenrivera96492 жыл бұрын
I want model that reads ac/DC amps and inrush current I think it is the 208d
@KissAnalog2 жыл бұрын
Yes that is correct;) Let me know how it works for you. I like them very much! I might be giving one away soon. Since you are a sub you will be on top of the list if you are interested?
@MrRubenrivera96492 жыл бұрын
@@KissAnalog yes I am interested just to try it sir and you do great videos of meters
@KissAnalog2 жыл бұрын
Thanks so much!
@Dansk552 жыл бұрын
I think I'll go with Uni-T UT210E seems better built quality and costs less now
@KissAnalog2 жыл бұрын
Thanks for this idea. It is a great option especially for lower current measurements. Here's a link: amzn.to/3FlxwIU
@surfreadjumpsleep3 жыл бұрын
Does anyone know how the fuyi fy219 compares to the kaiweets/habotest wrt inrush current?
@KissAnalog3 жыл бұрын
Thanks for the great question! I have this meter in the box so I’ll do a comparison;)
@surfreadjumpsleep3 жыл бұрын
@@KissAnalog That would be great. Here in Hungary the Kaiweets is called Habotest & is available from aliexpress. Also available is the Fuyi with a little bit better shipping times promised.
@KissAnalog3 жыл бұрын
Thank you for that feedback! Wow! Great to hear from our friends in Hungary!
@surfreadjumpsleep3 жыл бұрын
@@KissAnalog Just one friend, but I'll mention it to other geeks I may find. Only problem, I can't speak Hungarian!
@surfreadjumpsleep3 жыл бұрын
@@KissAnalog I'd guess it'll do fine for most things. The inrush DC current is what I'm curious about. If it works as well as the 208D then I'd buy it as it's cheaper.
@ericgee6585 Жыл бұрын
Please remove the protective film from the displays, it can make a difference.
@KissAnalog Жыл бұрын
Thank you!
@Kilgorebass73 жыл бұрын
Codes used up ☹️
@KissAnalog3 жыл бұрын
Thanks for letting me know, I'm checking to see if I can get more...I'll post on this video if I get them;)