That magic corner disappeared and reappeared it's magic!

Lovely job Del Boy … Great tip with the 50 mm timer blocks for fixing back the base units , beats fiddling about with those L brackets & a much more solid fix .. 👍🏼 Looking forward to seeing it completed. Keep em coming del 🔨

You make it look effortless

Genuinely love seeing other carpenters like myself who love our trade, great job del!

Driers when full weigh a fair bit, I'd put the angle support on three sides with two 15mm shelves, lovely job and I can see you're enjoying the install 🪚👍

Fantastic work !!! Del youre doing a beautiful job cant wait to see the finished job !!!!

This is the kind of step by step series I really like to watch from yourself, everything from magic - corner , keep up the good work big guy. 👏👏🙌🙌👍

You should be called the Tall Humble carpenter thank you for your great work which helps us diyers cheers mate

Some good practices there big man 👏👏 Our manufacturer also do the separate solid sink panel but I remove it now (fortunately they make the unit with vertical front and rear rails) as I had two bad experiences with undermount sinks that required removing to either be resealed or replaced and it was a nightmare getting them out because of that panel. I now set up a frame with 25x50 to support the undermount sink and make sure it can all be accessed from inside the unit, just in case🤞

Lovely looking kitchen good quality looking forward to seeing it finished Thanks del 👍

love the kitchen fitting videos

another great piece of work...loved the idea with the top unit great when working solo, its those little things that are so pleasing..

Great work Del, you make it look easy. 👍🏻

😎

I feel your pain with the damaged door. I fitted my neices kitchen recently and went through the same drama. Eventually got it sorted out. It's the inconvenience that's annoying. Keep the vids coming del. Brill as always. Cheers

Beautiful job as always Del

Nice One Del 👏, no back door 😂☘️🇮🇪👍

Excellent job mate 👍

Love your work. Your tips about scribing has helped no-end. Those scribe jigs, I bought the set and so glad that I did. Currently fitting my own kitchen and loving it. 😇

I used to do the exact same thing with those above fridge type cabs, probably most of us one man band do I guess! Some of them will still be there to one the ones where I did a full bulkhead and cornice to ceiling 😜 Stan the Stan stands for wall cabs above worktops 👍🏻. And some home made jigs for holding doors and panels. I used to do that same trick too with the Integrated D/w and fridge panels 👍🏻 Give it a real good smack off the concrete on the corner in the box… you get your money and the snagging / odd job man can fit it later…. I’m on to you Delboy! 😜😂

Great vid and god tips, thanks. That broken door at the end is what makes me cry about these pre made kitchens. No way you can repair that.

As always T.C. A great watch you’re a top lad keep the great work up 👍👍

19:23 put some angle limiters over the hinges to prevent doot slapping.

Nice neat job dell👍👌

Lovely work as usual del 👌🏻

Hi tanks a lot for teaching us Bu why you don’t show us anything!!?? I have problem to fitting back side washing machine dishwasher and sink Exactly for water mechanism ❤❤❤❤

Great work mate, I must admit as a plumber I was feeling a bit of pain in the utility wondering where the supplies and waste were for the washer.

Good video cracking work one I like to do is put in rails above appliances just make a 150mm by 602 Rail normally just use a offcut from end panel so it's matching in with kitchen and kreg screw it in just find it keeps the gap consistent

👍👍👍

Top job Del

Hiya TTC great video with so many instructions on how to put a kitchen together ...so please keep them coming GL&HC (GOOD LUCK & HAPPY CARPENTRY) (✌ peace✌) coming from Dulwich London England👍

Love that

thanks bud!

Great job I was wondering if you are putting a door on the washing machine and tumble dryer you should do a video just on that 😉

Fitted dishwasher always a worry. All dishwashers seem to last about as long as it takes to fit them. Mine is just a free standing 600. Good job because I am on my third in 15 years. I get lots of calls to pull out and replace the things. The fitted ones never seem to be direct replacements.

Hi Del. If you were buying a kitchen, what makes would you avoid and which ones would you recommend? Brilliant content by the way.

Del, liked the block tip, have you used the orange ‘space plugs’? I think they are really good

14:36 MAKITA RULES ✊

Thanks for another fantastic video. A question if I may? The electrician has fitted the sockets behind the integrated appliance. I’m worried the appliance may not fit as I’ve been told that the sockets should never go behind an integrated appliance as this doesn’t allow the appliance to go all the way to the back. Is this correct?

The camera work is pretty good but your carpentry is bang on

It's better than EastEnders!

Shame the kitchen supplier didn't provide enough height on tall end panels. Be nice if the cornice could butt in between rather that run round.

I don’t know how you keep on top of the innovations that are introduced over the years since you did your apprenticeship. Do the kitchen manufacturers offer training/workshops or do you have to work everything out for yourself?

Hi Del, just found your channel courtesy of Gosforth Handyman and love what you're doing. Kitchen fitting seems like witchcraft but you make it seem so easy. One thing I noticed was the dishwasher being only 450? Seems like a rather large kitchen for a slimline washer 😳 I do wonder whether the owner will wish they swapped the 150 pullout for a full size dishwasher (or maybe they like washing up)!

Looks great Del. Bit of nifty camera work as well.

🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

Hi Del just found your channel via gosforth handyman, now subscribed to yours also. Great work pleasure to watch, who is the manufacturer of that kitchen it looks a very nice build etc.

You seem to know every trick of the trade....

We have just started watching you after Andy's mention. Where do you buy the mitre mate.

Question for you, cupboard doors with soft close. They are supplied with rubber bumpers on the inside to cushion the close to the carcass - but they always come off. Do you fit specific ones, or glue them to the doors (or to the carcass itself?). Thought it might be something you've seen lots and might have some perspective on.

Just bought the Fischer gun after your review on it. Should have found out earlier really but does the gun take paslode gas and nails too? Thanks

Love your hammer loop, is it plastic pipe?

what would you recommend for fixing upper units to brick walls. My units have metal hanging brackets. What length of screw? Bricks are only so big. I wander why 2.5 inch is used? Overkill? Would a 5 mm screw in a red plug be ok?

How to fit a ceramic sink

Weird question of the week, bin ‘unit’, same make as corner unit? Any good in your opinion? Cheers Del 👍🏻

I know you said there's a tumble dryer going in that space is there a vent in the wall or is it a condensing dryer? I thought most condensing dryers now were piped up to the sink or a separate drain?

Which kitchen manufacturer Del?

no back door??? i hope they've got a massive DOG!

Are your walls there perfectly plumb?

where is the kitchen from?

Del chucking the camera up and hoping for the best is what we want from these videos, rough and rugged, it’s what we are as tradesmen!😂 Chippy videos don’t suit the high end production

Gloss? No handles? Finger-mark nightmare.

I fitted kitchens for ten years, it makes me depressed just watching it now. I'm off.