Klein Tools Ratcheting Impact 11-in-1 32500HDRT & KNECT Pass Through Socket Set 65300

Рет қаралды 193,035

Күн бұрын

Klein Tools 11-in-1 Ratcheting Screwdriver 32500HDRT: amzn.to/3ToO3Vb
Klein Tools Socket Set 65300: amzn.to/4a1keAj
Gearwrench Pass Through Socket set (Craftsman is no longer available): amzn.to/4bB8g2u
Klein Tools 11-in-1 32500HD: amzn.to/3E3cAIk
Klein Tools 11-in-1: amzn.to/3VuNMiA
Malco Bit: amzn.to/3I5LVhh
DeWalt Bit Holder: amzn.to/3GqtrXC
Klein Tools Ratcheting 11-in-1 Impact Rated Screwdriver & Nut Driver (32500HDRT)
Klein Tools 32-Piece Standard (SAE) 1/4-in Drive 6-point Set Pass Through Socket Set (65300)
Ratcheting 11-in-1:
-1/4" Quick-connect on power nut drivers to easily switch from screwdriver handle to impact driver.
-Includes impact rated 1/4-Inch, 5/16-Inch and 3/8-Inch power nut drivers, 1/2-Inch standard nut driver, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, #1 and #2 square recess, and T25 TORX.
Socket Set:
-Klein KNECT Small Pass-Through Socket Wrench Set with 7 sockets, 21 screwdriver bits, extension, impact adapter, 1/4-Inch square adapter, and handle
-1/4" Quick-connect on power nut drivers to easily switch from screwdriver handle to impact driver.
00:00 Intro
00:37 Comparison to Original 11-in-1
01:34 11-in-1 Ratchet Feature
04:13 11-in-1 Walk Through
06:47 Ratcheting Feature
07:40 New Features
09:32 KNECT Socket System
14:50 Drawbacks of pass-through
16:24 KNECT Mod Case
19:56 Back Drag Test
20:55 Closing
#kleintools #tools #maintenance

Пікірлер: 230

@gasparmora5070 5 ай бұрын

Wow, great explanation of how you can use both of the tools together. I have the original 11 in 1 impact but you’ve convinced me on getting both 😁

@projectpinehills 5 ай бұрын

Glad it was helpful and thanks for watching! 👍

@geoffap0 6 ай бұрын

Great video! I’ll be buying both the 11 in 1 ratchet and Knect pass thru set. I like the flexibility the 11 in 1 gives for custom setups using other bits and adapters. First time seeing one of your videos and look forward to watching more!

@projectpinehills 6 ай бұрын

Thanks for watching!

@lohikarhu734 5 ай бұрын

I have a pass-through socket set, which spends a lot of time on the shelf...BUT, when you spot problem, it's an incredible time and effort saver!

@projectpinehills 5 ай бұрын

Yes it can be. Thanks for watching! 👍

@Agent_G_33 4 ай бұрын

I always hated multi-bit screwdrivers because you couldn't use standard 1/4" bits, and none of them were ratcheting. So, now I guess I have no choice but to buy this screwdriver. Simply no choice. Surely my wife will see the logic, and understand that my hands are tied...

@projectpinehills 4 ай бұрын

Yes it’s the first time I have carried a ratcheting screwdriver. I really like how the ratcheting works on this driver as well. Thanks for watching! 👍

@fishysnowman9082 7 ай бұрын

Really good video. 👍

@projectpinehills 7 ай бұрын

Thanks for watching and commenting! 👍

@patrickboyle7092 3 ай бұрын

i like how informative this was

@projectpinehills 3 ай бұрын

Thanks for the feedback, much appreciated. Thanks for watching! 👍

@m.t.v.7934 Ай бұрын

It is a great tool, I bought one to use at work and I love it. I wish my job would buy these, they currently buy the 11-1 screwdriver, and all the different nut drivers but not this. So I just went out and bought it and have not regrated it once.

@projectpinehills Ай бұрын

Thanks for the feedback. It’s a good combo. Thanks for watching!

@SuperMIKevin 6 ай бұрын

yesss! finally, believe it or not i've thought of this years ago when i first bought one of their drivers, every year we get closer to a sonic screwdriver!

@projectpinehills 6 ай бұрын

Good deal! Thanks for watching and posting!

@annanmanpaul101 6 ай бұрын

you are so right about the turning direction

@projectpinehills 6 ай бұрын

I must say after it was pointed out to me that if I changed my perspective to which way I turned the handle and not the ring, it would seem more initiative. I've been doing that and that did make it more intuitive. Thanks for watching!

@CPurdiePlays 5 ай бұрын

Really wish that pass through set was offered in metric. Guess I'm on the hunt now. First time watcher. Great video!

@projectpinehills 5 ай бұрын

Thanks for watching and posting... consider subscribing! I think Klein should make it in metric. I see an overwhelming amount of comments requesting metric.

@cashisgreen6383 4 ай бұрын

Wish the set wasn’t 50$ for non metric, would’ve been much tempting if it had both together.

@projectpinehills 3 ай бұрын

That would be a nice option.

@RB-be4yf Ай бұрын

My suggestion on your comment about no contrast markings in the socket set. Remove all the tools, and with a black wax marker, rub it into the recessed areas. Wipe off excess. Put tools back in.

@projectpinehills Ай бұрын

Good idea. Thanks for watching!

@Albertcortes66 6 ай бұрын

Great video

@projectpinehills 6 ай бұрын

Thanks for watching and commenting!

@nismo2070 3 ай бұрын

I have never been let down by the Klein tools I own. They make good stuff IMO. Made in the USA still means something to this old tech.

@projectpinehills 3 ай бұрын

The made in the USA products are the best quality. Thanks for watching! 👍

@andyh1227 7 ай бұрын

I think the direction you turn the ratcheting impact 11/1 screwdriver is a matter of perspective. You mentioned if you turn the collar right it makes it loosen fasteners. But if you decide to hold the collar instead of the handle, then you are turning the handle right to set it to tighten fasteners.

@projectpinehills 7 ай бұрын

That’s a great point actually. I still think that having it go in the direction you are applying force would engineer out changing the ratcheting mode by accident. Thanks for watching and commenting! 👍

@ynnhoj912 22 күн бұрын

Great review! Ive subbed

@projectpinehills 22 күн бұрын

Awesome, Thank You!

@Albertcortes66 6 ай бұрын

I have the icon one too that one is great too

@progression_decibel 5 ай бұрын

The new 11-in-1 is nice - my local Lowe's has it I believe. I'm debating this Klein one or one of the multi-function ratcheting sets from Wera.

@projectpinehills 5 ай бұрын

The Wera tools are nice. Thanks for watching!

@phillipmoody710 5 ай бұрын

I swapped out the square for an ECX and paired it with the slotted, then changed the torx to a PH3 so I have PH 1,2,&3 on the other end. The Craftsman pass through was made by gearwrench and is compatible with that and huskies pass through.

@projectpinehills 5 ай бұрын

I knew Gearwrench had the patent, didn’t know if they actually made it or just licensed the design.

@yes_man212 3 ай бұрын

I actually have the 11-1 it’s amazing, and surprisingly good with impacts

@projectpinehills 3 ай бұрын

I really like the ratcheting version of the 11 in 1. Thanks for watching! 👍

@yes_man212 3 ай бұрын

@@projectpinehills I have the regular impact rated one, I might have to buy the ratcheting one when I go for a tool run again

@projectpinehills 3 ай бұрын

It’s the best ratcheting driver I’ve used and I’m not a ratcheting screwdriver fan.

@lorenrickey5481 2 ай бұрын

Then why doesn’t Klein include the ratcheting screwdriver in their kit?? It only available with the fixed 11-1. I don’t want to have to buy versions to get the ratcheting one.

@myerereynolds3752 5 ай бұрын

Got the 3/8 knect. Pretty good use it at work. Wouldnt get too crazy in high torque situations as the sockets tend to slip out of the extension. Other than that not bad. They really need a metric version

@projectpinehills 5 ай бұрын

Thanks for the feedback on the 3/8. Definitely need a metric version. Thanks for watching! 👍

@DKMendez 6 ай бұрын

The impact 11 in 1 is the best, it's become a staple in my tool bag

@projectpinehills 6 ай бұрын

Same here, it’s the first ratcheting driver I have had that can turn anything. Thanks for watching and commenting! 👍

@bretts7694 5 ай бұрын

Yep I use it almost every day.

@edgarrodriguez-xs5wv 6 ай бұрын

Thanks for this video, I too have have the craftsman set, it was my junk yard carry since it has every size Metric and SAE, i immediately thought about getting the impact adapter for my set, but now know it won't work .

@projectpinehills 6 ай бұрын

Good deal! The Craftsman set was a nice set with a really well indexed space saving case. Thanks for watching and commenting! 👍

@nmmj3253 23 күн бұрын

buen video

@projectpinehills 23 күн бұрын

Thanks and muchas gracias for watching!

@JC_1095 7 ай бұрын

Thanks for the video. since the klein pass through socket set is pretty new, I havent seen a lot of videos on them online yet. Do you know if that magnetic bit adapter is compatible with double sided wiha bits? Also I don’t think they feature any flex adapter options, right? I’m always thinking about that because I’ve had a few times when flex adapters have saved the day. I’ll probably have to go third party for a back up option just in case.

@projectpinehills 7 ай бұрын

It can take one of the double ended bits that come with the 11 in 1 but not very securely. I’d need more info on the flex bit question. Thanks for watching and commenting! 👍

@asherdie 6 ай бұрын

Adapters are available on their website. They got some interesting offerings.

@projectpinehills 6 ай бұрын

Thanks, I’ll check it out.

@jessjessup2361 Ай бұрын

Great overview. Is there a standalone or integrated box for the 11 in 1?

@projectpinehills Ай бұрын

You can buy the 11-in-1 by itself, I have a link in the description. Lowes sells the 11-in-1 with some extra bits as a set. Thanks for watching!

@arsgamer 6 ай бұрын

It looks like Home Depot has a Crescent pass-thru socket set as well as an adjustable wrench/ratchet that compete with this.

@projectpinehills 6 ай бұрын

I’ll have to check it out. Do you have a Home Depot link?

@markkempton4579 6 ай бұрын

I get the nut drivers only coming in SAE, but that awesome socket set is useless to me without metric. LOL

@projectpinehills 6 ай бұрын

That’s good feedback for Klein. Thanks for watching! 👍

@hardtymz2517 6 ай бұрын

Yea at this point, schools in the US only teach metric now. No point at all for SAE. That stopped in 1966.

@AdamHillikerLikesRobots 5 ай бұрын

Same here, just about to add to cart ... no metric? Back to the search.

@projectpinehills 5 ай бұрын

Yeah need metric as well.

@WarriorKidd06 6 ай бұрын

Just left Lowe’s looking for this and I couldn’t find it any where.

@projectpinehills 6 ай бұрын

Yes they’ve been hard to find in the store. Some not put out until a store reset. Thanks for commenting and watching!

@bretts7694 5 ай бұрын

I really want this since I have the 11 in 1 ratchet screwdriver.. $50 just seems like a lot for a 7 socket set. I'll probably end up getting it as portability and carrying the least amount things as possible is very important in my profession.

@projectpinehills 5 ай бұрын

Yeah I think the price is a little high. Thanks for watching! 👍

@Phil-Lemon 5 ай бұрын

Will the Klein 3/8 pass through socket set fit the new ratcheting handle?

@projectpinehills 5 ай бұрын

No, the 3/8ths pass through has a larger inner diameter to allow for larger work to pass through the socket. Thanks for watching! 👍

@Albertcortes66 6 ай бұрын

I still like it I've used everyday since I got last month but I shouldn't put impact on it

@Set_your_handle77 6 ай бұрын

11:30 I was eying your Craftsman set. I have the same set and another one that uses the opposite lid to hold more tools. Don't know where the second is at the moment after my move. They Still fetch a high dollar value on eBay even if incomplete.

@projectpinehills 6 ай бұрын

I’m surprised they sell on eBay. I’m also surprised how many people own that craftsman set. Thanks for watching and commenting! 👍

@hardtymz2517 6 ай бұрын

Harbor Freight makes a great one

@tonelljohndejesus6847 7 ай бұрын

Can you attach the 1/4” hex bit adapter directly to the ratcheting screwdriver to create a stubby screwdriver?

@projectpinehills 7 ай бұрын

Thanks a great question. Yes, any socket can be ran without the extension in the ratcheting screwdriver. They all have the same 12 point pass through connection. Thanks for watching and commenting! 👍

@BigMoe1010 7 ай бұрын

Klein tools has been releasing a lot of new tools lately and almost all of them are no longer made in the USA.

@projectpinehills 7 ай бұрын

I’m prefer their USA 🇺🇸 made tools. I’d like to see more. Thanks for watching! 👍

@qsm1334 6 ай бұрын

I'm assuming that's got something to do with their partnership with Lowes and not home depot anymore

@projectpinehills 6 ай бұрын

Best I can tell, new non standard tools are not made in USA. 🇺🇸

@morganmerritt8846 6 ай бұрын

Americans prefer China prices.

@corkacola 6 ай бұрын

Milwaukee is a Chinese company and no one says a word about it

@TheDobbermn 5 ай бұрын

So there's the 32500HDRT version which has the ball detent. There's (at Lowe's) also the 32500HDRTG version that has just the 'line' detent. So I think what your saying is you need the HDRTG version if you want to interchange the socket set with the ratcheting handle?

@projectpinehills 5 ай бұрын

You would need 32500HDRT to work with the pass through sockets. Thanks for watching! 👍

@ericbrenenstuhl6039 6 ай бұрын

Klein warranties and sells replacement parts for nearly everything they sell, you just have to wait for it. Otherwise, find an electrical supplier near you who carries some of them in stock granted, I'm fortunate enough to live near half a dozen supply houses who carry tools and some replacement parts in stock. Thanks to Lowe's now having a contract with Klein, I've taken a broken tool bought at another store and direct replaced the tool as they warranty Klein products.

@projectpinehills 6 ай бұрын

That’s an excellent point regarding electrical suppliers and warranty. How was the Lowes warranty process?

@kobie4238 7 ай бұрын

I have the og impact 11 in one. But my coworker broke my phillips bit recently and i cant find replacement bits 🤦🏽‍♂️

@projectpinehills 7 ай бұрын

That’s no good. They have replacement bits for the original none impact 11 in 1.

@luke50469 5 ай бұрын

I have the original 11 in 1 and i keep it on my back pocket while working. Is this new one too big to comfortably have in my back pocket while working all day?

@projectpinehills 5 ай бұрын

I think it would work fine. It’s about the same size as the original. Thanks for watching! 👍

@SomeGuy-yu4vn 4 ай бұрын

A Pass through set would be perfect to have in the storage compartment of the four-wheeler, cuz it's nice and compact.

@projectpinehills 4 ай бұрын

It’s nice to have a compact set. I keep a small DeWalt set on my UTV. Thanks for posting and thanks for watching! 👍

@TrailBoundco 6 ай бұрын

Do they have a metric version?

@projectpinehills 6 ай бұрын

No, not yet. Thanks for watching and commenting! 👍

@greedygringoprospecting6941 5 ай бұрын

as long as klien still carries a lifetime warranty. thats all i want. 👍👍👍👍👍

@projectpinehills 5 ай бұрын

Good point, I have not done a warranty yet.

@dannytango36 6 ай бұрын

Love this set But is it available in metric?

@projectpinehills 6 ай бұрын

Not yet, but it should be. Hoping Klein makes it. Thanks for watching! 👍

@Jonathan-mn9wk 3 ай бұрын

Wow - I have to travel (fly) with tools. I would buy this in a heartbeat if it was metric.

@projectpinehills 3 ай бұрын

That would be nice. Check out the new Klein videos we have. Thanks for watching! 👍

@larrylacostjr.2075 6 ай бұрын

Hold the collar and turn the handle in the direction you want the screwdriver to turn to set the ratchet direction and then let go. You almost have it right, but the concept is in the collar

@projectpinehills 6 ай бұрын

That’s a great point and I’ve started doing that which has made it much more intuitive. I also have not bumped the collar unintentionally yet. Thanks for watching and commenting! 👍

@davidmurray3504 5 ай бұрын

Could this be a low cost replacement to a Wera Tool Check +?

@projectpinehills 5 ай бұрын

Not enough bits and it cost as much. I thinking the icon flex head mini ratchet is a better replacement. Thanks for watching! 👍

@Albertcortes66 6 ай бұрын

I have the rachet set I put impact to it once and now it doesn't work so great. It has a hard time going from on to off. It gets stuck

@hardtymz2517 6 ай бұрын

It’s not made for impact and a better question no one seems to be asking for this is “wtf part of it can fit on an impact gun any way?!”

@briankleinschmidt3664 6 ай бұрын

That's the first time I ever heard of a "pass-through" ratchet. You have two. I'm going to throw away all my deep well sockets.

@projectpinehills 6 ай бұрын

Sounds like a plan. Thanks for watching! 👍

@ShiryouOni 5 ай бұрын

That's why I just prefer my old craftsmen ratcheting screw driver. All it does is let you ratchet in the opposite direction. I like those sockets though!

@projectpinehills 5 ай бұрын

I’d like to see that one. Thanks for watching! 👍

@vader10308 6 ай бұрын

Great video too bad you can’t buy them yet, not sure how you got yours. I searched Lowes online in store and Amazon no where to be found.

@projectpinehills 6 ай бұрын

I have links in the video description and check the electrical isle. One store had a couple of the socket sets out but the Ratcheting 11 in 1 showed in stock on the Lowes app but was not out. Turned out it was in top stock (in one of the pallet racks in an isle). I was told that items will remain in top stock until the do a store reset. I've since seen it in the electrical Isle. Thanks for watching and commenting.

@alanmichaelmaciel196 6 ай бұрын

Just went to Lowe’s this morning and I was going to pick up this socket set and I was at the self check out and it wouldn’t let me buy it so I had to then go to the helpdesk to pay for it and then they couldn’t sell it to me because ultimately there has been a recall on this product

@projectpinehills 6 ай бұрын

@alanmichaelmaciel196 a recall on the screwdriver or socket set?

@vader10308 6 ай бұрын

Ok update….. I did find the screwdriver and got one. I had the 11 in 1 non ratcheting and got the ratcheting one. I also found the peg that the socket set should be on but it was empty. Still not sure why it’s not showing up on the Lowes app I have on my phone.

@projectpinehills 6 ай бұрын

That’s odd, should show in the app. Thanks for the feedback!

@jaysondamian1117 6 ай бұрын

do they sell the ratchet handle by itself?

@projectpinehills 6 ай бұрын

No, just the ratcheting 11-in-1. Thanks for watching! 👍

@saeklin 6 ай бұрын

I'm too afraid to risk using the supposedly impact-rated nutdrivers from the 11in1 in a power tool. I'm certain they will crack or snap and leave me with a 5in1 or worse.

@projectpinehills 6 ай бұрын

Yeah they aren’t as easy to replace as a standard nut driver. Thanks for watching! 👍

@ironsmith9769 4 ай бұрын

the passthrough should be triple square or spline drive to make it standard. maybe they are.

@projectpinehills 4 ай бұрын

Got it. Thanks for watching!

@Peter-yn8uy 6 ай бұрын

So it should be in Canada 🇨🇦 in 2 or 3 years then ?

@projectpinehills 6 ай бұрын

Is that usually the case for Klein in Canada? 🇨🇦

@sal.m2A 6 ай бұрын

Isn't it standard 1/2 inch? Isn't that the 11th tool?

@projectpinehills 6 ай бұрын

That’s correct. Thanks for watching! 👍

@craiggrudnik1729 6 ай бұрын

Looks like you would have clearance issues and would still need a deep socket and extension.

@projectpinehills 6 ай бұрын

Yes, I guess this set is focused on all-thread. Thanks for watching! 👍

@brucecleland9220 2 ай бұрын

Got the 65400 socket set (because amazon did not have the 65300) ,but, it's not compatible(too large for The 11-1) . Also my 11-1 has a ball bearing lock (not ring). I noticed the your packaging show a ball bearing( 32500HDRT) PS Lowes seems to be the only source for the 65300 set.

@projectpinehills 2 ай бұрын

Right. KNECT S is the small and KNECT M is the larger. Have to match those up.

@brucecleland9220 2 ай бұрын

@@projectpinehills Still not sure why the center connect on the32500HDRT is a ball bearing that needs to be lined up in order to seat. going to Lowes today to see if theirs uses the ring. (and pick up the 65300 set)

@brucecleland9220 2 ай бұрын

Notice at the 23 second mark of your video, the packaging shows the ball bearing connect .

@projectpinehills 2 ай бұрын

You are right, the packaging mistakenly shows the ball bearing. At 08:17 in the video there is a comparison of the shafts. Clearly the original has ball bearing and the new one does but. Thanks for watching! 👍

@brucecleland9220 2 ай бұрын

@@projectpinehills The saga continues. Lowes has an 11-1 with a model # of 32500 HDRTG. The packaging shows a "ballbearingless" ring at the center axis. However it has a single ball and no ring. It does except the 65300 socket ends into the handle, so, I am going to content with that and move on(I have a microwave to install)

@summersol5 6 ай бұрын

All that lube will raise flags with tsa. Be sure to clean all that and store in check bags when flying.

@projectpinehills 6 ай бұрын

Didn’t know the lube would raise alarm bells. Thanks for watching!

@summersol5 6 ай бұрын

@projectpinehills Jeff Dunham has a tsa joke questioning him about residue on his puppet.

@rodneyfields4081 7 ай бұрын

Use a sharpie on the size and then it will contrast.

@projectpinehills 7 ай бұрын

That might work. Thanks for watching and commenting. 👍

@paulroupas9723 5 ай бұрын

Wish it was metric. Hopefully Klein pays attention to the comments and adds metric versions

@projectpinehills 5 ай бұрын

There is a lot of interest in metric. Thanks for watching! 👍

@chesty1369 5 ай бұрын

The pass thru? I sthere a metric set?

@projectpinehills 5 ай бұрын

Not yet. Thanks for watching!

@stevestadinko6045 6 ай бұрын

I have never liked ratcheting screwdrivers. If I have to use one, I lock it in manual mode. Do any of you who work for a living actually use them?

@projectpinehills 6 ай бұрын

I don't like ratcheting screwdrivers either, I guess because you are constantly fiddling with changing the ratcheting feature between 3 modes. But I have enjoyed using this one and even used it recently with a 1/4" socket adapter. I'm still trying it out, but it appears to be the first ratcheting screwdriver that I will use regularly because you can use the handle to ratchet any kind of bit. Thanks for Watching! 👍

@rustycoones9452 3 ай бұрын

I can not find this product anywhere

@projectpinehills 3 ай бұрын

It’s new coming soon. They are supposed to be in the store by the end of March. It may be in stock above the shelf and not brought down yet. Thanks for watching! 👍

@bizzfo 5 ай бұрын

When will they realize they need to make metric versions of these kits as well?

@projectpinehills 5 ай бұрын

I’ve seen that question a lot. They respond to feedback so time will tell. Thanks for the feedback!

@nf4833 6 ай бұрын

Does it come in metric?

@projectpinehills 6 ай бұрын

No, but it should. Thanks for watching and commenting! 👍

@lowlyp0p 3 ай бұрын

I am not sure but isn't it a "Ratcheting" tool which implies when you turn it a certain way, that is the way is going to "ratchet" ?

@projectpinehills 3 ай бұрын

I know what you mean... that make sense. I took one commenters advice and I just hold the ratchet setting ring and then turn the handle the direction I want to go. So now it's more intuitive to me. Thanks for watching!

@strongislandautoenthusiast841 5 ай бұрын

How much did you pay for the Craftsman set?

@projectpinehills 5 ай бұрын

It’s been a while, I think it was around $60. Thanks for watching! 👍

@strongislandautoenthusiast841 5 ай бұрын

@@projectpinehills Can you put in a link for that craftsman set?

@projectpinehills 4 ай бұрын

Craftsman licensed the pass through socket idea from Gearwrench. The Craftsman is no longer available but here is a link to a Gearwrench set: amzn.to/4bB8g2u

@strongislandautoenthusiast841 4 ай бұрын

@@projectpinehills I really Craftsman and I like Gear Wrench. Thank you for the link.

@projectpinehills 4 ай бұрын

Thanks!

@ruimenor7264 3 ай бұрын

Id love they had more metric stufg

@projectpinehills 3 ай бұрын

More coming out soon. Thanks for watching!

@stephenmaschefzky5945 6 ай бұрын

I do like this set, but one dilemma I’ve always came across. When bolting down unistrut the sockets are to wide to fit between the strut to get to the nut, that’s where you standard deep socket pulls through. So I won’t buy this because then I need both sets, so because these sockets are so wide, they don’t fit between unistrut. Big flaw in my opinion.

@projectpinehills 6 ай бұрын

That’s the challenge with pass through sockets. Sometimes they don’t fit as well as standard. Thanks for sharing and watching! 👍

@stephenmaschefzky5945 6 ай бұрын

Great video btw! Seems like a great set minus my dilemma

@projectpinehills 6 ай бұрын

Thanks!

@nos5718 7 ай бұрын

You forgot the 1/2in nut driver in the handle hole.

@projectpinehills 7 ай бұрын

You are right, driver is 1/2”. Thanks for watching and commenting! 👍

@Aimsport-video 17 күн бұрын

Ratcheting on mine stopped working on the first day.

@projectpinehills 17 күн бұрын

That’s odd, how did the replacement work for you?

@Aimsport-video 17 күн бұрын

@@projectpinehills well, fidgeting with the handle alone, changing the setting to forward and reverse repeatedly with no effect for 10min, ended up just working again. Still don’t know what the magic combo was to get it working. First fail of a Klien tool that wasn’t due to an absurdely severe use case.

@potterportraits 6 ай бұрын

the problem with klein tool pass through is no metric so I can't put it in my motorcycle tool kit.

@projectpinehills 6 ай бұрын

Yes, a lot of people need a metric option. Thanks for watching and posting! 👍

@potterportraits 6 ай бұрын

@projectpinehills thanks for the reply and video. If they did this and the driver in metric I'd have one on every bike I own.

@appleblows1 13 күн бұрын

I thought Klein tools were made here in the US of A.

@projectpinehills 13 күн бұрын

Some are, like lineman pliers and diagonal cutters. Thanks for watching!

@centurionhomeinspectionsin2253 6 ай бұрын

It’s the way you turn the handle, not the ring. Hold the ring and turn the handle.

@projectpinehills 6 ай бұрын

That’s right, I’ve since learned that, makes all the difference lol. Thanks for watching and commenting! 👍

@joeyansley7277 3 ай бұрын

After I get my Mac bit driver kit I can never go back to any bit driver

@projectpinehills 3 ай бұрын

I’ll have to check it out. Thanks for watching!

@jjr902 6 ай бұрын

Bring back American manufacturing for the love of God!

@projectpinehills 6 ай бұрын

Yes Klein USA made tools are the best. Thanks for watching! 🇺🇸

@Nick-jc6mx 6 ай бұрын

The idea is that the key difference here is okay?

@projectpinehills 6 ай бұрын

Well said, thanks for watching!

@BSTatonka 3 ай бұрын

Most things I work on are metric. Any rumors of a metric in the future

@projectpinehills 3 ай бұрын

Klein seems to be coming out with more metric. We’ll see. Thanks for watching!

@JuanLanda-sk1iy 3 ай бұрын

Texas

@projectpinehills 3 ай бұрын

Is this a real post?

@JuanLanda-sk1iy 3 ай бұрын

@@projectpinehills sorry I meant to put that on another post

@projectpinehills 3 ай бұрын

Thanks! You looking for the tool at Lowes?

@JuanLanda-sk1iy 3 ай бұрын

@@projectpinehills yes I’m new to the trade and looking at different tools

@projectpinehills 3 ай бұрын

Well the 11 in 1 is a good start. Thanks for watching! 👍

@davidsteinfeld9123 7 ай бұрын

I have the very same thing from craftsman i got to years ago then i found another from husky i truely like em both till ifound out gear wrench makes em and any thing pass through can still be gotten craftsman dont make that kit nomore since sears dont exist and the home depot dont run the pass through thing nomore either it wasaround Christmas time a promo they called it any hoo i did a bit of searching for the replacement part i broke out of the craftman kit andthats what i found now the other thing was the husky and the craftmen share inter changeablity i can use any part of either in any manor and be ok did not know this at that time of purchase i found it out later the craftman is all the smaller sizes while the husky is all the bigger sizes gear wrench makes them and nolonger for either but one can still find them if you look in the right places i found a replacement handle from gear wrench on Amazon for my craftsman kit it sucks how something this good did not catch on i have had both kits in use for many years there great to have nice idea I can see its still on the come back the idea is still not dead yet

@projectpinehills 7 ай бұрын

Thanks, this is good information about what's compatible with the Craftsman set! It appears that Gearwrench and Crescent still offer pass through sets on Amazon (maybe it's all actually Gearwrench?) The Craftsman had a great, space saving case that was well indexed. Thanks for watching and thanks for the feedback! 👍

@davidsteinfeld9123 7 ай бұрын

@@projectpinehills your very welcome These tools are a welcome leap over many things that I have encountered over the years Asa matter on fact when I bought the first seti thought of it as a gimmick till I tried it was I most impressed true to the facts to this day great idea Gear wrench did licence out to a company by the name of apex tools they make stuff for other people and stamp a name on it oh yeah Stanley uses em to Someplace in all that it's supposed to be cost effective as we do know sears don't make a thing for them selfs any more neither does the home Depot or Lowe's they hire out to resource Gear wrench is here to stay even professional mechanics use gear wrench I trucks in town all the time To you my friend have to you and yours have a safe and happy holiday

@projectpinehills 7 ай бұрын

Good deal, I’m checking out the Grearwrench. Thank You! 👍

@cyberlunacy 2 ай бұрын

It’s called ratchet wrenches…. Been around for ages and are sad and metric This is neat and 100% use but I would usually grab my ratchet wrench, this is really only good for low torque or preloosened nuts/bolts

@projectpinehills 2 ай бұрын

Thanks for watching!

@Mike_from_Canmore 5 ай бұрын

Its a versatile piece but all the connecting parts make for a sloppy feeling driver.

@projectpinehills 5 ай бұрын

I see your point, it takes some getting used to. I do really like this for adding a general use ratcheting screwdriver. Thanks for watching and the feedback! 👍

@greedygringoprospecting6941 5 ай бұрын

i use snap-on ratcheting screwdrivers. i traded work for tools.

@projectpinehills 5 ай бұрын

Nice 👍

@j.p.1576 6 ай бұрын

I sent them a message a few weeks ago asking why their JIS#2 bit is identical to their PH#2. No reply. I’m done with Taiwan Klein.

@projectpinehills 6 ай бұрын

That JIS # 2 bit sold separately?

@rickvigil5847 6 ай бұрын

If it was made in the USA i would buy it even if i didn't need it

@projectpinehills 6 ай бұрын

Thanks for watching and commenting!

@Ensirum 6 ай бұрын

You're looking at the ratcheting mechanism wrong. You're seeing it as you turning the mechanism right, but if you step back from the picture, you could see it as the screwdriver turning left.. the way you're going to be screwing.

@projectpinehills 6 ай бұрын

lol, you are 100% right. I’ve been doing that and it makes it much more intuitive. I do still think the ring could get turned unintentionally but it hasn’t happened yet. Thanks for watching and posting! 👍