Klipper Timelapse is EASY Now - Updated Setup Tutorial

Рет қаралды 34,938

Жыл бұрын

Klipper now includes built in Timelapse support. I'll step you though Fluidd setup and calibration, Mainsail is a similar process.
Webcam I am using: amzn.to/3sxzwdg
Patreon Support: / jjshankles
Support me on KZfaq: / @jjshankles
Written Steps I used: github.com/mainsail-crew/moon...
With the new Moonraker plugin and integration with Fluidd and Mainsail you no longer need to mess with writing any custom macros since they are all adjusted in the user interface now.
The gear I use:
3D Printer: amzn.to/3mpSBeZ
Polymaker Filaments: us.polymaker.com/products/pol...
Main Camera: amzn.to/2RNpEbV
Nifty 50 Lens: amzn.to/2Ls60ky
Sharpest Wide Lens: amzn.to/2XOj1v8
Telephoto Nikon Beast: amzn.to/2xqSUvz
Favorite Not RODE Mic: amzn.to/2C4W0se
Perfectly Smooth Gimbal: amzn.to/2MXBCgr
Camera Strap: amzn.to/2rvGtMd
Atomos Ninja V Recorder: amzn.to/2FL03LO
Affordable Studio Light: amzn.to/2rzdAic
Chapters:
Intro - 00:00

Пікірлер: 46

@happytodd Жыл бұрын

Thanks for the step by step instructions, I've been running Klipper for over 6 months now and missed having timelapses when I had octoprint. I know it was quite involved getting it up and running previously, which I never attempted to do. This made it super easy and worked first time!

@JJShankles Жыл бұрын

Glad it helped! Yeah I was super surprised as well with how easy it was!

@mancaveprinting Жыл бұрын

Really nice tutorial. Timelapse is working finally!

@3D_Print_Machine 5 ай бұрын

GREAT VIDEO, Thank you for sharing this knowledge, can't wait to see the results!

@GuysShop Жыл бұрын

Thanks for postiung this. Looking forward to getting it working on my machines

@jkepps 3 ай бұрын

The exact video I was looking for. Thanks a ton!

@EsotericArctos 4 ай бұрын

This is a great tutorial. Taking time lapse photos getting the head out of the way would cause the print to take a lot longer than a normal print, so definitely not something you want on all the time, but those time lapse photos are absolutely amazing for KZfaq videos and the like. :) I was even considering running OctoKlipper plugin and using Octoprint for timelapse as it just seemed difficult in Klipper to get it running. So glad it has been made a lot easier now

@malcolm4k270 11 ай бұрын

How would I do this on my Neptune 4 pro?

@scratcherfpv9746 Жыл бұрын

Hey JJ, thx for this video! Awesome stuff! Do you know how to rotate the time lapse. In the fluidd settings is an option for rotating and it works for the live viewer but the timelapse needs also to be rotated. Any hints?

@beauregardslim1914 Жыл бұрын

Awesome! Just this morning I decided I need to do some timelapses.

@JJShankles Жыл бұрын

They are so much fun when you get it set up. And it's nice with the new Klipper interface buttons you can turn it on and off whenever.

@ajo.5476 Жыл бұрын

Hi JJ. I already have klipper with mainsail and use a webcam for my Timelapse. Is there a way to hook up a digital camera to get clean crisp Timelapse?

@stephenratliff486 Жыл бұрын

Great tutorial thanks!

@JJShankles Жыл бұрын

Glad you enjoyed it!

@Nameless_rat Жыл бұрын

How well does coasting in Cura reduce the stringing of the layer option when running a Timelapse?

@madorax251 Жыл бұрын

does the firmware retraction on the prusaslicer & superslicer have to be activated if the firmware retraction on the timelapse setting is activated?

@six1free Жыл бұрын

I'm using creality slicer and have added the TIMELAPSE_TAKE_FRAME both before and after the layer change, as well as under timelaps (900 seconds) - and when I save the gcode, TIMELAPSE isn't anywhere in the file any ideas? I feel like there must be a setting to enable the extra gcode, or mark layers - I also figure this is why it didn't pause at X layer when I tried that too (unrelated) ... and perhaps why klipper always says 0/0 layers?

@Civic_Esq Жыл бұрын

I've set up exactly as you have, the new tab and the setting show up, webcam is super laggy but working and I've added the post process in cura. However, when it prints, it just says "unknown command TIMELAPSE_TAKE_FRAME" at the beginning of each layer? I've googled and can't seen to find anyone else with this issue

@allanmartinez6097 Жыл бұрын

Great video! I'd like to know if the setting up of the camera focus is the same way that you showed in the former tutorial

@JJShankles Жыл бұрын

Yes, I forgot to mention it since I didn't change anything for that. It is still the same

@ChazBword Жыл бұрын

How do you do that intro the SAME every time! Another great video JJ.

@kristiankeshel5414 7 ай бұрын

do you have rasperry pi motherboard connected for this to work?

@alexvikingo6676 Жыл бұрын

how you change camera autofocus?

@eduardocardenasmass9385 11 ай бұрын

Hello, how do I start the session with the raspberry? I know that in the console I enter pi and then it asks me for the password, what I have read is that for the first time it is raspberry but it tells me access denied

@dennismurphy3076 Жыл бұрын

hi great video, did miss something out.....? Klipper is giving me this error message:- Include file '/home/pi/printer_data/config/macros.cfg' does not exist

@Armor3dprinting Жыл бұрын

Just did the install, however, a timelapse.cfg never populated.

@beechFPV Жыл бұрын

Does this also work for fluidd?

@georgedunn7573 Жыл бұрын

Is there a way to access more camera features such as zoom in and out? I would like to zoom in on smaller prints.

@BultiZ Жыл бұрын

Does your webcam have such optics? else zoom wouldnt actually zoom more then you could do in any video editing software

@georgedunn7573 Жыл бұрын

@@BultiZ Yes, my camera has these features. I have a Logitech C930e 1080P HD Video Webcam. I use these features in OctoPrint all the time. I zoom in and out of small and large prints all the time. I don't have the ability to do this in Fluidd or Mainsail. I would love to have or know of these features in Mainsail as I like the interface and other features more than OctoPrint but I also do timelapse videos.

@toddcoello6461 Жыл бұрын

I just updated my klipper and now timelapse is broken again. Have you had this happen? this is what it says. Moonraker warnings found. [update_manager timelapse]: Moonraker is not permitted to restart service 'timelapse'. To enable management of this service add timelapse to the bottom of the file /home/pi/printer_data/moonraker.asvc. To disable management for this service set 'is_system_service: False' in the configuration for this section. any suggestions?

@toddcoello6461 Жыл бұрын

I got it figured out.

@halsaresnowpaw522 Жыл бұрын

What happened to the output directory setting that was in the old way?

@halsaresnowpaw522 Жыл бұрын

So I was able to create a symbolic link from the local directory to the network drive I want them saved on. Storage is somewhat limited on my Pi and I didn't want it filling up with time lapse videos.

@mrgadget28 8 ай бұрын

Hi why would i be getting this error Include file '/home/mks/klipper_config/timelapse.cfg' does not exist.Thanks

@kindu5166 2 ай бұрын

you need to copy it from from moonraker-timelapse/klipper-macro to the root directory

@radiant9230 Жыл бұрын

The tab doesn't seem to show up for me after activating it on Mainsail

@JJShankles Жыл бұрын

Did you try restarting the raspberry pi? That might fix the install.

@radiant9230 Жыл бұрын

@@JJShankles I'm running on a thinkcentre converted to a Linux machine

@mascot4950 Жыл бұрын

As usual, I seem to have an issue no one else has ever had. Or, at least not that google is able to find for me. The setup appears to go smoothly, timelapse settings and tab shows up as expected in fluidd, but the moment I actually start a print (technically, the moment when the first frame would have been captured) the video feed on the timelapse tab changes to a broken image icon and nothing is captured. Hyperlapse or via layer change macro makes no difference. I verified the folders in the config exists, as well as ffmpeg. If anyone popping by here should have any tips, I'm all ears.

@hawsroy Жыл бұрын

just realized this is 6 months old but i’ll leave this anyway in case. so if my understanding is correct those are just the frames being captured in the timelapse tab. the whole file will be accessible there when the print completes successfully and the video renders (automatically if you let it, along with the other settings you specify). in your config you specify an output folder that you should be able to access easily using FTP through something like FileZilla (similar to how you ssh in, if you’re not familiar) and then you could find the video there. i don’t think the timelapse tab ever has anything but still images.

@mascot4950 Жыл бұрын

@@hawsroy I did get this sorted way back when. The issue was that it wasn't actually capturing any valid frames. I don't remember exactly but I believe the solution was that the timelapse settings in Fluidd had two cameras available for selection, "default" which I originally had it at, and the name of my actual camera. I switched it over when I noticed the option and everything started working fine. If that wasn't the solution then some config file fiddling was involved as well. Either way, is all good now. Well, the printer turned out to be crappy but at least the timelapses work. :) I appreciate you trying to help.

@madorax251 Жыл бұрын

can you make a tutorial how to Backup klipper Configuration to GitHub

@JJShankles Жыл бұрын

Yeah I can do that, you mean an automated method. I just manually upload it, but I can cover the basics if that would be useful.

@madorax251 Жыл бұрын

@@JJShankles yes i would really like to be able to back up klipper configuration files to github automatically using gcode. but no one has made a tutorial video yet