Knife Sharpening Made EASY! // Wicked Edge Gen 3 Pro Review

Рет қаралды 31,810

Күн бұрын

In this video, I review the Wicked Edge Gen 3 Pro knife sharpener and compare it to two other sharpening systems. As a custom knife maker, I've used many different sharpeners, but the ‪@WickedEdgePrecisionSharpeners‬ Gen 3 Pro stood out as the clear winner. Its precision and consistency make it a great investment for anyone looking to sharpen their knives. In this video, I'll show you how the Wicked Edge performed and why it's become my go-to sharpener.
⭐ Buy Wicked Edge Direct - wickededgeusa.com/collections...
⭐ Buy Wicked Edge on Amazon - amzn.to/3RbpQlZ
🔸 Become a RBO Patron - / redbeardops
🔸 Knives For Sale - redbeardops.square.site/s/shop
🗡 Knife Builds:
Twist Damascus Bowie - • "That's TWISTED!" -- L...
Fantasy Challenge Knife - • "This is Madness!" -- ...
Bitcoin Knife - • The Most VALUABLE Knif...
⭐ How To Videos:
Homemade 30 Ton Press - • Homemade Hydraulic FOR...
DIY Heat Treat Oven - • How to Build a Heat Tr...
Instagram: / redbeardops
Twitter: / redbeardops
Facebook: / redbeardops
#redbeardops #knifesharpener #knifesharpening
00:00 - Intro / Outline
02:52 - Section 1: Initial Set Up / Testing
06:39 - Section 2: Wheel VS Wicked Edge
11:39 - Section 3: Belts VS Wicked Edge
15:15 - Section 4: Spyderco
16:49 - Section 5: Zero Edge To Sharp Custom
20:44 - Section 6: Final Thoughts (Pros/Cons)
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Пікірлер: 99

@RedBeardOps Жыл бұрын

⭐ Buy Wicked Edge on Amazon - amzn.to/3RbpQlZ ⭐ Buy Wicked Edge Direct - wickededgeusa.com/collections/sharpeners 00:00 - Intro / Outline 02:52 - Section 1: Initial Set Up / Testing 06:39 - Section 2: Wheel VS Wicked Edge 11:39 - Section 3: Belts VS Wicked Edge 15:15 - Section 4: Spyderco 16:49 - Section 5: Zero Edge To Sharp Custom 20:44 - Section 6: Final Thoughts (Pros/Cons)

@JohnDoeTheTroll Жыл бұрын

No discount code? Get Clay on the line and tell him we want 20% off! 😁

@RedBeardOps Жыл бұрын

@@JohnDoeTheTroll I'll tell em John The Troll sent me!

@RoarIsaksen1959 Жыл бұрын

I just bought a Tormek double rotary wet grindstone machine with rotary leather stropper from Sweden. The machine comes with a lot of different angle jigs for knifes axes and chisels. In addition, I bought an extra 4000 grit rotating Japanese polishing whet stone for this machine. All of this was a few hundred dollars cheaper than the Wicked Edge Gen 3 pro pack. The Wicked edge is just a small sharpening jig for the table. And it is just an insane rip-off all together, compared to the more professional machine with all those accessories from Sweden. The price of Wicked Edge products is complete madness.

@RedBeardOps Жыл бұрын

The Tormek is a nice machine!

@vaughnmilburn6966 Жыл бұрын

That sharpening system is awesome and while the price is a bit steep, you get what you pay for! I have used many different systems in the past, and after watching your video I am confident, this system is the best I have seen. I will be purchasing one! Thank you for the excellent video.

@RedBeardOps Жыл бұрын

Thank you for the comment sir! It's a well made machine for sure... the results speak for themselves on the edge. Cheers!

@RoarIsaksen1959 Жыл бұрын

The more professional Tormek swedish rotating whetstone machine with rotating leatherstropper is less than half the price of the Wicked Edge III pro pack. And it can do the job in a fraction of the time and effort.

@abrahamkalichman6845 3 ай бұрын

@@RoarIsaksen1959 There are wet rotating grinding machines that are %10 the cost of this wicked edge contraption that blow It away in any which way possible. The Tormek machine duplicates are as low as $200.

@diyfireking Жыл бұрын

Great review, thank you for sharing this 😀😀

@RedBeardOps Жыл бұрын

Cheers!

@TyrellKnifeworks Жыл бұрын

Great review. Personally, I no longer use the WE system, it's just too slow. I'm strictly sharpening with the 2x72 with my new sharpening attachment. Stay tuned, I'll have a video of it next month. Maybe I'll send you one. 😉

@RedBeardOps Жыл бұрын

I’ll stay tuned for sure!

@1fasttoad 6 ай бұрын

Great information, and straight forward vid. Thanks for that

@RedBeardOps 6 ай бұрын

Glad it was helpful!

@jamesstoffel6835 Жыл бұрын

We have a 2x72 in the shop, but I like how this can 'tweak' the end result enough to make a difference. Thank you for posting this vid!

@RedBeardOps Жыл бұрын

Cheers sir! I agree, starting with the 2x72 and then finishing with the WE is a workflow I'll probably do frequently in the future now.

@seansmart3440 6 ай бұрын

Great review. Thank you!

@RedBeardOps 6 ай бұрын

Glad it was helpful!

@VW999 Жыл бұрын

Great review. Thanks.

@RedBeardOps Жыл бұрын

Glad you liked it sir; cheers

@mapperdba Жыл бұрын

Great through video from someone who knows their way around a knife, being a knife maker, and knife sharping. Very good content and video quality. Would be interested on more in depth process od using lapping films.

@RedBeardOps Жыл бұрын

Thank you greatly for the comment and request! Cheers

@spurs3483 Жыл бұрын

Really enjoy your videos! Nice job. You totally freaked me out for a second. I have whiskers that don't quite make the ZZ Top cut, but get close. It would take a lot to convince me to shave it. Ya done good, real good. 😂

@RedBeardOps Жыл бұрын

LOL, thank you sir! Cheers - Glad you enjoyed this one.

@JeremyClow 3 ай бұрын

Great review...thanks. I own the WE130 and the biggest upgrade, to prevent scratching the blade on tall knives, is a set of clamping two-piece shaft collars from McMaster-Carr. With them on the guide rods, you can prevent the sharpening stone from dropping below the edge of the blade and causing scratches from contacting the face of the blade.

@RedBeardOps 3 ай бұрын

Nice! Good idea

@garyarrington7225 Жыл бұрын

You do great work I like you knifes.

@RedBeardOps Жыл бұрын

Thank you greatly Gary!

@donny6363 Жыл бұрын

Thats my go to sharpener! Love it

@RedBeardOps Жыл бұрын

Thanks Donny! It's pretty awesome... gotta say

@donny6363 Жыл бұрын

@@RedBeardOps It's not the fastest... but can't argue with the results! Great video man!!

@RedBeardOps Жыл бұрын

@@donny6363 Agreed! and thank you

@MASI_forging Жыл бұрын

You did a great work. 😃😃

@RedBeardOps Жыл бұрын

Thank you!

@astaschak 11 ай бұрын

Very nice video. Over the years ive acquired a few systems and a handful of hand stones of different types chasing my preffered way of sharpening. Normally i hand sharpen with a dmt fine plate or spyderco ceramic bench stone then strop. Over time my technique shows its imperfections and the secondary gets all buggered so ill use my kme for small slipjoints and stuff or the wicked edge go deluxe for everything else to properly reset the edge. I started with a lansky, used belts, water stones, oil stones, ken onion sharpener and what i mentioned above seems to work the best for me. I'd love the pro system or one of the others but for how much my WE go gets used I couldnt justify the cost for personal use. Diamond and ceramic bench stones plus a strop for a quick touch up once you get the hang of it is so much faster in my opinion.

@RedBeardOps 11 ай бұрын

Thanks for the notes sir!

@thefishrustler3893 Жыл бұрын

What’s up Red, good video. Was awesome to see the Siren make a cameo in there! I enjoyed seeing the before and after stropping bit too. One thing that would be cool to test is the difference between stropping and micro beveling. I’m a huge fan of using microbevels. I feel like it always gives me the maximum level of sharpness with the least amount of work and the least steel removal. I also believe that it provides a longer lasting edge than stropping but I’ve never rigorously tested that. What would be interesting to me is to take two equally sharp knives that tested at very similar levels (say 200) and then strop one and VERY lightly micro bevel the other, maybe with a 1200 or 2000 stone. I personally believe the microbevel would be more agressive and last longer but it would be interesting to compare the final sharpness between the two techniques. Anyway, just my ramblings. Thanks for the video!

@RedBeardOps Жыл бұрын

Glad you enjoyed it! I'll have to try that, I agree... probably would yield a heck of a robust edge.

@interrogationfiles 11 ай бұрын

You got a sub buddy I just got wicked edge can't wait to came

@RedBeardOps 11 ай бұрын

Hope you enjoy the system!

@aaronnoffsinger5922 Жыл бұрын

One major Pro is no power needed. Thanks for the excellent show

@RedBeardOps Жыл бұрын

Good point! Didn't think about that one. Cheers sir

@neilingram1994 7 ай бұрын

had one of these for a few years now and once you have the original bur using the 100 grit it is litrally 10 swipe with each grit

@edanpino-xt1ph Жыл бұрын

I think this might come in handy, but honestly, I think I’ll stick with my Spyderco stones. The medium is awesome for everyday use, and the other two are great for kitchen knives. I love the hell out of those stones, put a nice edge on everything

@RedBeardOps Жыл бұрын

Thanks for the comment!

@-I-Use-Punctuation Жыл бұрын

Tip: use your entire stone front to back... your filling away w/ 50 grit & only using an inch of your stone.

@gibsonjk4 Жыл бұрын

Ive been using wicked edge for about 4 years now and nothing has came out that beats it my opinion the mirror finish you can get with those lapping films are excellent better then any others system ive seen and i have lapping films and also strops and you can get kangaroo leather with diamond. 10 micron spray to make it just stupid sharp good review the stones work better as they break in and yeah its not cheap but its quality sharpener that will lasts for years

@RedBeardOps Жыл бұрын

Thanks for your comment sir!

@harleyd2900 Жыл бұрын

That system looks amazing... will investigate my budget... lol

@RedBeardOps Жыл бұрын

Hahaha, good luck with your budget! I can say the machine is solid.

@mcm4point2o Жыл бұрын

cool upload dude. have you had any experience with the Spyderco sharp maker?

@RedBeardOps Жыл бұрын

Thanks man. I do not have experience with that system, sorry!

@richardbranton190 Жыл бұрын

I've been looking at one of these but damn they are so expensive. I use my 1×30 and they turn out sharp enough to cut paper and hair. Im sure it's nowhere as sharp as you can get it on that system 👍 great video

@RedBeardOps Жыл бұрын

Thanks for the comment Richard! Glad you enjoyed the video.

@TheDmurphyar Жыл бұрын

If they gave me one I'd use it too! I'm certainly not in line to buy one for that price though. Hahahahahaha

@RedBeardOps Жыл бұрын

I feel you sir! The good news is that they do make a budget model that will achieve very similar if not just as good results... just a little less user friendly (more timing consuming). I totally get it though.

@interrogationfiles 3 ай бұрын

Need some help when I trying to find the right sweet spot like you said when I think I found it with the black pen one one side is different from the other side not a same I don't no what I am doing wrong I got gen 3

@RedBeardOps 3 ай бұрын

Well I think it could come down to the knifes you're working with not having perfectly exact secondary bevels? Sounds like a good use of the fine adjustments.

@sganet_ 7 ай бұрын

Don’t use WE because it’s not only harder to use than most systems, the big elephant in the room is their use of their own stones, and not the more standardized 6” stones. TSPROF K03 or Kadet Pro can reach much better results with more stone options, and ability to run more clamp types, and better built quality with use of 7075-T6. I got a Kadet Pro for $368 new on Black Friday, came with 5 Diamond stones. It’s much easier to setup, adjust angles, and has stone thickness compensator which allow you to quickly change stones from different makers. There’s no going back for me, I’ve already reached higher results on the Bess with the same para 3 rex45.

@RedBeardOps 7 ай бұрын

Thanks for your comment and experience!

@NOFX0890 Жыл бұрын

Very cool with great results. Next vid: James "Red Beard" How to shave a spiders R Sole.

@RedBeardOps Жыл бұрын

LOL, thank you

@michaelvanbuskirk8845 7 ай бұрын

I'm happy with my Edge Pro Apex 4. The Wicked Edge system is nice but for too expensive in my opinion.

@brianbaumgartner7223 Ай бұрын

I know it's kinda off-topic, but where can I get Texas Flag buckets like in the background?

@RedBeardOps Ай бұрын

www.homedepot.com/p/Leaktite-5-gallon-Texas-Flag-Bucket-with-Foam-Grip-60-Pack-05GLGTX/307919812

@rhecyeeyeejake7184 6 ай бұрын

I would get a we system but thats a relaly high price i like the angle adjustable rods and the stone grits but i need something hopefully cheaper that does that sharp of bevels for my knives i carry or use

@RedBeardOps 6 ай бұрын

They do offer cheaper models than the pro system that could be worth looking into. Cheers!

@bhamneurad1 Жыл бұрын

I own the Gen 3 Pro. I've had some problems with it with small (e.g. paring) knives. Even on larger knives, In my hands it's not quite as easy to get a good result as is shown on many KZfaq videos. I realize that may be "on me".

@RedBeardOps Жыл бұрын

Interesting! I haven't tried it on paring knives, but have been able to do pretty good with it on everything else so far. Cheers sir

@Huttify Жыл бұрын

Do we always want the edge to be in the middle of the blade? If not, when or which blades does not?

@RedBeardOps Жыл бұрын

I'd say for all the knives I've made I've wanted the edge to be centered in the blade. It think there are some chisel ground blades out there that this would not be the case.

@patrik4561 6 ай бұрын

How long does it take you to sharpen kitchen knives and pocket knives? With the we System …

@RedBeardOps 6 ай бұрын

Well it depends on if it's a knife I'm making or if it's one I'm re-sharpening. re-sharpening not that long at all. I think I timed a custom knife in this video.

@vinnym5095 Жыл бұрын

When you say stropping down what exactly do you mean? If you’re sharpening at 17 degrees, are you stropping at 16 or 18 degrees?

@RedBeardOps Жыл бұрын

I go down a 1/2 degree... not a pro, but that's been working for me. So if I'm at 18 degrees I'll bring it down to 17.5 to strop. This is because the leather "smushes" a little bit and you don't want to round over the edge you just worked on.

@vinnym5095 Жыл бұрын

@@RedBeardOps but why don’t you stay at the same degree?

@RedBeardOps Жыл бұрын

@@vinnym5095 This is because the leather "smushes" a little bit and you don't want to round over the edge you just worked on.

@interrogationfiles 11 ай бұрын

Just got wicked edge with all stone cost me a sh!t load😂😂

@RedBeardOps 11 ай бұрын

Yep, there is no denying it's expensive... I'm a big fan of the results though!

@ClenioBuilder Жыл бұрын

👏👏👏👏🤜🤛

@RoyRoger-xq5zu 10 ай бұрын

Dude show some love to Victorinox and review a Hunter Pro

@RedBeardOps 10 ай бұрын

Interesting, never heard of those

@Liljoozy 4 ай бұрын

12:39 whoch knife is this

@RedBeardOps 4 ай бұрын

This one - kzfaq.info/get/bejne/hJt3fKd1z8WYnqs.html

@willw7595 Жыл бұрын

well if you shave your beard off then there goes red beard ops. lolol

@RedBeardOps Жыл бұрын

LOL, I know right?! I'm pot committed

@Sensorama2000 3 ай бұрын

Something to dream about... Extreme Monking 😅

@RedBeardOps 3 ай бұрын

Haven't heard that phrase before... lol

@SergZatochka124 5 ай бұрын

Очень неудобная штука

@RedBeardOps 5 ай бұрын

Извините, что вы так думаете!

@abrahamkalichman6845 3 ай бұрын

I dont know if this comment is too obvious as for anyone watching this video , but you said nothing about any finishing compounds that are used on your 2 other comparison systems. There are many diamond compounds available to strop with that would be much more effective in than the wicked edge system. Diamond compounds in paste form, water and oil based,spray, and emulsions. and others. Besides the multitude of diamond sizes. There are CBN compounds that act differently. There are ceramic compounds. There are green chromium oxides, there are aluminum oxide, and much more. All of these can be e utilized with or without the wicked edge system, at a extremely fast pace. And might i add a way lower price structure than any thing similar to what wicked edge had to offer. Not an opinion.fact. all of the degree of final sharpness was related directly to the finishing steps that you used.

@RedBeardOps 3 ай бұрын

interesting, thanks for the notes