KNX Home Assistant - Step By Step Tutorial

Рет қаралды 74,187

3 жыл бұрын

In today's episode "KNX Home Assistant - Step By Step Tutorial"
In this episode i will show you how to add your KNX devices in Home Assistant!
Home Assistant is an open source home automation platform. It supports many smart devices and of course KNX.
For this tutorial you will need :
1) a KNX IP Interface or Router
2) a Raspberry Pi
3) An SD Card at least 32 GB
In order to install Home Assistant please watch our step by step tutorial : • Home Assistant getting...
Home Assistant Official Web Site : www.home-assistant.io
Home Assistant KNX Integration : www.home-assistant.io/integra...
Please have in mind that in order to work on a KNX project you need to be certified.
You can find Certified KNX Training Centres in the link below.
www.knx.org/knx-en/for-profes...
Poseidwn Tech on Social Media:
www.poseidwn.tech
/ poseidwn_tech
/ poseidwn.tech
/ poseidwn.tech
/ poseidwntech
KNX Tutorials Playlist : • KNX Tutorials
KNX Web Page : www.knx.org/knx-en/index.php
ETS Software : www.knx.org/knx-en/software/e...
KNX Training : my.knx.org/
KNX Basic Course Documentation : amzn.to/2pASDCM
KNX Advanced Course Documentation : amzn.to/2I1mw68

Пікірлер: 96

@acronce 3 жыл бұрын

Thanks so much for the video! I’m planning to migrate our custom automation system to KNX, then use Home Assistant as the server. This video is a great introduction to the process. And perfect timing for me.

@PoseidwnTech 3 жыл бұрын

We are glad that it could help!

@Utking3 Жыл бұрын

Amazing video, simple, well explained, straight to the point. Thanks for making KZfaq a better place for these types of videos :) Also thank you for not putting video ads inbetween! :)

@gbemigameduoye3400 2 жыл бұрын

Thankyou so much for this. I was ab le to setup home assist within a few hours with my KNX system thanks to you. Excellent tutorial .. easy to follow .. Subscribed !!!

@PoseidwnTech 2 жыл бұрын

You're welcome! Thank you for your comment!

@maxmaurin277 2 жыл бұрын

Excellent tutorial. Thank you very much!

@PoseidwnTech 2 жыл бұрын

You're welcome! Thank you for your comment!

@sotirispiskitzis3462 10 ай бұрын

Μπράβο, πολύ ωραιο tutorial....

@lionel4565 3 жыл бұрын

excellent video! my first on hass and I quickly integrated my first KNX lights. Complete video is accurate in every way! well done and thank you !

@PoseidwnTech 3 жыл бұрын

You are welcome! Thank you for your comment!

@herbi1966 3 жыл бұрын

Superb tutorial, thanks alot!

@PoseidwnTech 3 жыл бұрын

You are welcome! Thank you for your comment!

@grandmabetty2411 3 жыл бұрын

Dude, how cool is that video!

@PoseidwnTech 3 жыл бұрын

Thank you for your comment!

@abdallah2243 2 жыл бұрын

Thanks for the useful video

@PoseidwnTech 2 жыл бұрын

You are welcome!

@arnoutdevos3601 3 жыл бұрын

Great video! I've tried to run HA on different RPi's and with different SD cards but it always runs slow and crashes often. Ordered another new SD card and a new power supply. I hope it works this time so I can finally get my KNX devices in HA! Your tutorial will help!

@armando08011971 3 жыл бұрын

The same hapened to me, then i change to an usb of 32 gb and all problems go away

@arnoutdevos3601 3 жыл бұрын

@@armando08011971 Thanks for the tip! I'll try that next!

@PoseidwnTech 3 жыл бұрын

We didn't face any problem so far. We have tried HA in several Raspberries Pi 3B and we are using SD Cards from Sandisk.

@teroronkanen603 2 жыл бұрын

Looks cool, ty. I'm planning to integrate my KNX modules to Home Assistant soon. One question though. I'd like to use a laptop instead of RPi. Is it possible to integrate KNX to Home Assistant Container or do I need to have Home Assistant Supervised?

@m.mavrogiannos6755 10 ай бұрын

Indeed excellent tutorial to the point! Good job. Which KNX IP gateway would you recommend besides the WEINZIERL that is compatible with Home Assistant and also other automation hubs like Homey ?

@zakariaezdi2382 2 жыл бұрын

good evening, congratulations for the explanation and for the time dedicated, I watched and re-watched the video to try to connect my KNX equipment with home assistant as you specified .... but I still can't complete the job ... has by chance an email to be able to forward my problem and the various messages on the log. Thanks in advance

@alexiseduardomarquezramos8913 3 жыл бұрын

dude its the most complete video than i ever see.

@PoseidwnTech 3 жыл бұрын

Thank you for your comment! We are trying hard to make detailed and easy to follow tutorials!

@wolphiekun Жыл бұрын

Nice!

@PoseidwnTech Жыл бұрын

Thank you!

@kennethgevaert9041 2 жыл бұрын

Hi, thanks for this great video. I'm following these steps to go to the next level with my home automation project. The core of my house is KNX. 2 questions I had: 1) I didn't get why there are different group addresses for the switches... Are these power plugs? 2) Where do I find the IP address of my KNX IP interface? thanks for the help!

@PoseidwnTech 2 жыл бұрын

1) These are the Group Addresses from ETS. From more details check this video : kzfaq.info/get/bejne/jd50a7eEyKulgGg.html 2) From ETS5 you will be able to find the IP address of the KNX IP interface. Otherwise you could use an IP Network scanner like Advanced IP Scanner.

@PragashMurugasu 2 жыл бұрын

Great Tutorial, but somehow, my home assistant cannot recognize. I am using the thinknx . Do you have any idea why Thanks for your help

@sangagodfrey5077 3 жыл бұрын

Thank you so much ，Can you publish a video of knx access to homkit?

@PoseidwnTech 3 жыл бұрын

We have 2 videos with integration between KNX and Apple Home Kit using : 1Home : kzfaq.info/get/bejne/ft2BhM2GrtLHg6M.html Thinka : kzfaq.info/get/bejne/fbmDhpd0scexmHU.html Later this year we will make also for Home Assistant.

@bartdetre8851 2 жыл бұрын

I loved your video and found it very useful connecting my KNX to Home Assistant, but do you have an example of how to connect/configure a KNX RGBW (MDT) controller?

@PoseidwnTech 2 жыл бұрын

Thank you for your comment! Unfortunately i haven't tried it yet. I will try to make a video about it.

@bartdetre8851 2 жыл бұрын

@@PoseidwnTech Thanks, I'm looking forward to it as I have two RGBW controllers to integrate in HA.

@narutoscarletXxx 3 жыл бұрын

Great video, very informative. Just wondering would the 1Home be able to integrate with HomeAssistant too?

@PoseidwnTech 3 жыл бұрын

If you mean to use 1Home as KNX IP interface and then make a visualisation for your KNX installation in Home Assistant then the answer is Yes!

@lovelyboy990 3 жыл бұрын

Thanks for the useful video, could you please share with us the rest API's of knx ip router if we would like to access it from our own mobile app (to integrate our mobile app with knx system), thanks in advance

@PoseidwnTech 3 жыл бұрын

Thank you for your comment! For this information please visit www.knx.org

@oskarma1801 3 жыл бұрын

Is it possible to ad Philips Hue lights in the config to be able to control? I ha e a older Master Link Gateway from Bang&olufsen. It has not support for Philips Hue natively but it has support for KNX. And I have Home Assistant running as well.

@PoseidwnTech 3 жыл бұрын

Home Assistant can auto discover Philips Hue so it is very easy to add them in Home Assistant.

@user-vc2ss2bd7n Жыл бұрын

Hello. Is Raspberry+KNX Home Assistant = alternative of Control4 ?

@dsmviper Жыл бұрын

Congrats, excelent. I´d just like to know, if i wanted to connect to apple home kit how would i do ? I only install home kit in home assistant ?

@PoseidwnTech Жыл бұрын

Go to Settings --> Devices and Services and configure HomeKit! Maybe we have to make a video about it!

@richardjanssen4659 3 жыл бұрын

Hi there, brilliant video, thanks ! Just ordered Weinzierl 773 and a new SD card to take up KNX integration. Would Visual Code Studio have any benefits as an (config file) editor over File Manager?

@PoseidwnTech 3 жыл бұрын

Thank you for your comment! Visual Studio Code is awesome but unfortunatelly Raspberry Pi cannot run this add-on.

@richardjanssen4659 3 жыл бұрын

Thanks! But I could run it on windows pc and then samba to the config files?

@PoseidwnTech 3 жыл бұрын

@@richardjanssen4659 yes you can!

@catalinpascal 3 жыл бұрын

Hi, if you use Phillips hue, do you still need a switch aktuator for lights in order to set the individual adresses? Thx

@PoseidwnTech 3 жыл бұрын

The group addresses are required in order to integrate KNX in Home Assistant. Philips Hue are auto discovered in Home Assistant so there is no need to edit the yaml file.

@catalinpascal 3 жыл бұрын

@@PoseidwnTech thx

@bavosaldien4497 2 жыл бұрын

I have two knx interfaces. one for my home and one for my workplace each with a different ip address. Can I combine there into one homeassitant setup?

@PoseidwnTech 2 жыл бұрын

I don't have an answer for that. I will have to try it first.

@acmedia63 Ай бұрын

Thank you so much, good tutorial. When installing a KNX system, can a system be installed with Home Assistant or OpenHAB without ESP software? Can you make a video about the KNX system with OpenHAB? Thanks.

@PoseidwnTech Ай бұрын

KNX devices require ETS Software for programming and configuration. Open Hub video is in our plans, so stay tuned!

@acmedia63 29 күн бұрын

@@PoseidwnTech Can we programming or using KNX devices with openhab or Home Assistant, without ETS software?

@salehalharthy830 3 жыл бұрын

I have followed your wonderful video until I reached the restart of server. I got a message”connection lost.restarting” after few seconds homeassistant war restarted but when I pressed the overview button, nothing was displayed, although I had yalm file for lights

@PoseidwnTech 3 жыл бұрын

Please send us more details at info@poseidwn.tech along with screenshots in order to be able to help you.

@moshiko2312 11 ай бұрын

Hi we miss you😊 can you do New vido about New knx security 2023.7.1 Thanks

@petraviii 2 жыл бұрын

Λατρευω τα βιντεο απο οταν μου βγηκε ενα office network setup και θελω απο τοτε να ρωτησω σχετικα με την αλλαγη router γιατι θελω να κανω host στον παλιο μου υπολογιστη αλλα με προβληματιζει η αξιοπιστια του router απο τον isp οταν βρισκονται ολοι στο σπιτι . Επισης το router χειριζεται και το τηλεφωνο υπαρχει κατι που πρεπει να προσεξω ή καποιο recommendation ;

@PoseidwnTech 2 жыл бұрын

Εμείς αυτό που κάνουμε συνήθως είναι να αφήνουμε το modem του ISP για το Internet και την Τηλεφωνία αλλά και για να είναι εύκολη η βλαβοληψία, (δηλαδή σε περίπτωση βλάβης βγαίνει άκρη μόνο όταν υπάρχει το modem του ISP!!!) και μετά χρησιμοποιούμε ένα Router που όπως έχεις δει από τα video μας είναι συνήθως UniFi χρησιμοποιώντας PPPoE pass through για να αποφύγουμε το double nat (διπλά port forward κτλ).

@63jeah 5 ай бұрын

hi, great video but i still don't understand were and why you used the raspberry???

@PoseidwnTech 5 ай бұрын

I used the raspberry to install Home Assistant. The raspberry will act as a server for the KNX installation.

@63jeah 5 ай бұрын

@@PoseidwnTech Uau!!!!! so whith this, you do not need to spend a lot of money in an 1home knx!!!!!!!! congratulations!!!!!!!!!!!

@nagyCurtainsmotor 4 ай бұрын

Can we use USB Interface instead of IP Interfac?

@PoseidwnTech 4 ай бұрын

I haven't tried yet, but it seems more complicated.

@piyushkumarjha1111 2 жыл бұрын

can we attach this home assistant over ALEXA or GOOGLE Assistant (voice control)

@PoseidwnTech 2 жыл бұрын

Yes you can but you will need a subscription to Nabucasa : www.nabucasa.com

@TheJonathanch 3 ай бұрын

Εχεις μηπως χρησιμοποιησει το baos module της wienzierl για επεκταση σε raspberry pi για να δεις πως λειτουργει?

@PoseidwnTech 3 ай бұрын

Δυστυχώς δεν έχουμε προλάβει να το δοκιμάσουμε!

@TheJonathanch 3 ай бұрын

Αν στο μελλον εχεις χρονο κανε ενα βιντεακι!

@SmatoIndia Жыл бұрын

only last enrty of KNX in yaml is working total and showing that every devices is unavaliable

@PoseidwnTech Жыл бұрын

Please check my last tutorial : kzfaq.info/get/bejne/qLtzpc2p17eooJc.html

@sakki25 3 жыл бұрын

Would it be possible to interface your Raspberry Pi directly to the KNX network without a KNX IP Interface or Router?

@PoseidwnTech 3 жыл бұрын

Maybe you can do it by using something like that : www.weinzierl.de/index.php/en/all-knx/knx-module-en/knx-baos-module-838-en We are testing it at the moment and when we are ready we will make a video about it!

@tamino8966 3 жыл бұрын

@@PoseidwnTech I got it up and running, if you have any questions feel free to contact me!

@Alex-ot8dz 2 жыл бұрын

Hi, thank you for the great video👍 Do you have a timelag between switching the light in HA and the light go on in real? Did you have complex scene's which you switch over HA? Here any timelags? Greetings from Germany ☺️

@PoseidwnTech 2 жыл бұрын

Hi! Thank you for your comment! I haven't noticed any time lag. Everything works smoothly!

@user-zx9tf4ei2g Жыл бұрын

是否可以有中文方式

@zejnowsky 3 жыл бұрын

Hi. Do you know something about possibility to use home assistnat with knx integration and voice control from google? It could be the cheapest way to use it together.

@PoseidwnTech 3 жыл бұрын

Google Assistant is supported by Home Assistant : www.home-assistant.io/integrations/google_assistant/ I haven't tried it yet with KNX but i will try it and maybe i will make a video for it!

@zejnowsky 3 жыл бұрын

@@PoseidwnTech i will be grateful.

@zejnowsky 3 жыл бұрын

@@PoseidwnTech did you try it yet?

@PoseidwnTech 3 жыл бұрын

We haven't found time to test it yet...

@jannibarchen4504 2 жыл бұрын

Hey, very good video and very helpful, but my code gives a error: -name: "example" address: "1/1/1" state_address: "1/1/1". "Bad identation of a mapping entry in line Example, column: Example" Can somebody help me?

@PoseidwnTech 2 жыл бұрын

Thank you for your comment! Do you want to send us the yaml file to info@poseidwn.tech to take a look?

@gbmwp 3 жыл бұрын

Ti raspberry πρεπει να το βαλω μαζι με το IP Router μεσα στον πινακα; Δεν εχω μεγαλο πινακα αλλα εχω 1-2 σημεια που εχω εξοδο ΚΝΧ καλωδιο. Μηπως μπορουσα να το βαλω εκει;

@gbmwp 3 жыл бұрын

Και δεν εχω καταλαβει πως συνδεεις το rasberry me to IP Router

@PoseidwnTech 3 жыл бұрын

Το Raspberry δεν χρειάζεται να είναι μέσα στον πίνακα το συνδέεις απλά στο τοπικό σου δίκτυο με ένα καλώδιο UTP. π.χ. σε ένα Switch ή απ'ευθείας στο Router σου. Οπότε το Raspberry και το KNX IP Interface/Router συνδέονται μεταξύ τους μέσω δικτύου.

@gbmwp 3 жыл бұрын

Εγω εχω ηδη στο σπιτι μου το IP Router της MDT. Οποτε δεν χρειαζομαι ακομα Ενα σωστα;

@PoseidwnTech 3 жыл бұрын

@@gbmwp πολύ σωστά! Δεν χρειάζεσαι κάτι άλλο.

@NetvoiceGreece 3 жыл бұрын

Θα έχεις προβλήματα με το PI, αν θες να ασχοληθεις κάνε το Setup σε nuke.