Koch Chemie Orange pads review

Рет қаралды 9,911

Forensic Detailing Channel

Жыл бұрын

get them here
tinyurl.com/bdfxsudp
discount code forensic

Пікірлер: 61

@AVSVALETINGDETAILING Жыл бұрын

Slims detailing 2” pads official Koch uk distributor. Love the vids keep Them coming, learnt so much from you over the years. And also you’ve saved me a fortune on products 😁🙏

@paulquickmire4140 Жыл бұрын

What a coincident Jon, I've just bought M3.02 and the purple pads (5" & 3") from in2detailing, to give the new car a proper clean and polish and not the dealership special. Your review of the whole Koch Chemie range is what made me go for this. I previously bought the yellow pads with the corresponding polish on your video and it's fantastic. So if it's good enough for the Forensic Detailer then quite frankly it's far too good for little old me. Again Jon this is why I love your channel, good honest reviews 👏👏👏

@heinvanbuuren8761 Жыл бұрын

In the Netherlands and Germany we call it “Kog”, that’s the way it’s spoken.

@01123581321341 Жыл бұрын

Nice to see these orange pads reviewed - top job ! I noticed how stiff/dense the whole range was when i used them but they’re top pads no doubt. Recently I’ve really become a fan of the Rupes pad/polish range - it’s epic and lots of choic and simple to understand and the abrasives are such a joy to use.

@crimsonpirate1710 Жыл бұрын

Defo rupes are the best

@andrewgibb8846 2 ай бұрын

I have a 2006 Ford F150 truck, the scratches were about 3/10 so 10 being destroyed clear coat, 0 being flawless. I used the orange pad and two full sets over the hood. It turned out just fine, I’d say I got it to 1/10 which was except able to me. No heavy pressure just let the pad and compound do the work. The speed was 5/6 on a Meguiars polisher and my movement was about a 2 inches per second under hot outside conditions about 28degrees Celsius. 👍

@owensteele1645 Жыл бұрын

We call it Crotch Kelly in my garage. The P3 is a great finishing paste.

@Mdetailing Жыл бұрын

Great video again sir

@dacdri Жыл бұрын

I've tried them, they are very good, but lake country for me to this day are the ones that make a great job and the most durable HDO pads.

@tomassmith1450 Ай бұрын

Another good informative video Jon iv learnt alot, microfibre cloths do you use in this video to buff of polish?

@ForensicDetailing Ай бұрын

you cant buy them mate they came direct from a mill. But something like the Rag Company Edgeless 300 or the Wax is Dead Buff cloths are very close to it.

@decker0373 Жыл бұрын

Nice little video! Just had the 3" and 5" delivered, will be used with the DAS-6 I've also just had delivered. I'm a weekend warrior and never used a machine before, I thought the one cut pad would be a good place to start, and with a good brand. I've only got Megs UC Jon, do you think that'll be a good combo? Thanks for yet more good work Jon.

@ImranAli-rp4kd Жыл бұрын

The pad will work with what you got , it is designed for there AIO polish which is for medium swirls and there one cut and finish which is basically a AIO has some protection in it , it’s going to work with any polish or even compound but you can’t expect it to remove heavy swirls or defects

@decker0373 Жыл бұрын

@@ImranAli-rp4kd thank you Imran

@matthewmanners8248 Жыл бұрын

Just bought the polish system and pads from slims detailing, Heavy cut was great but found the fine cut was leaving a strange residue on the surface, not sure about the pads they are very stiff to use

@404notfound..... Жыл бұрын

Interesting video, do you like these pads a lot better than the lake country pads for something like the flex 3401? Tks Jon

@ForensicDetailing Жыл бұрын

3401 has weird non standard sized plates. I've not used these much on the xce but should be fine

@bryanjordan4262 11 ай бұрын

Great channel - I’ve just subscribed. Would this pad be ok to use with Scholl Concepts S20 Black for a single stage paint correction?

@ForensicDetailing 11 ай бұрын

Yes m8.

@bryanjordan4262 11 ай бұрын

@@ForensicDetailing Thank you Sir!

@imprezaworks Жыл бұрын

Funny. Just bought h9.02 and red koch pad today from clean and shiny :)

@berniejrsotelo Жыл бұрын

What are those containers at the beginning of the video on the shelf. Can you put any bulk products in them?

@ForensicDetailing Жыл бұрын

Lab unlimited m8

@DandyNun Жыл бұрын

Which pads do you use with the APS 50mm backing plate Jon? Bought the PXE kit after watching your videos on it. Wondering what will work alongside the Flex pads but in this size, as the plate and extn bars are on offer on in2detailing atm.

@ForensicDetailing Жыл бұрын

I think rupes and zvizzer do pads that size. but I use flex and rupes.

@DandyNun Жыл бұрын

@@ForensicDetailing Thanks. I’ll take a look at the Rupes pads to go with the Flex ones then 👍🏻

@anonimushbosh Жыл бұрын

Hey John, I want to enrol on your open academy course but need to wait till Jan when I’m getting some bodywork jobs done. If I join now the 60 days will be up before I can use it so do you know if the £39 price will be the same in Jan? Or if I’d be able to save the vids to watch later? Cheers!

@ForensicDetailing Жыл бұрын

You cant save them as such m8. So I would wait untill closer to January. It will always have some code that gives it for 39 pounds. Sometimes even cheaper

@anonimushbosh Жыл бұрын

Nice one 👍👍

@dotjpegg4905 Жыл бұрын

Please could you share the make of the microfibre cloth you are using to buff the polish residue off?

@ForensicDetailing Жыл бұрын

It come direct from mill you can't buy

@seabrew1 Жыл бұрын

Those machines really are loud it seems. I would probably wear ear protection. My corded 15mm seems much quieter. Those pads are expensive, even in canada. I tried griots garage, lake country, rupes, shinemate, carpro and even some buff and shine pads. My favorite polishing pad is the orange lake country CCS/HDO pad - they "float" over the paint. I think the rupes yellow might last longer however.

@orthodox1717 Жыл бұрын

Do they float over the paint more so than the non-CCS HDO orane pad?

@seabrew1 Жыл бұрын

@@orthodox1717 never tried the regular HDO just the orange SDO, it's frankly my 2nd favorite pad. It still runs better than the rupes yelllow and even white. I'm not a fan of rupes pads anymore. They work but i think they are just a tad too stiff and tend to skip. Machine washing breaks them in a little better. If i started this as a side gig i would load up on the orange and blue HDO/CCS for 1 steps.

@Giannakhs1313 Жыл бұрын

Hello m8. You think using P6.01 with rupes yellow wool pad will do a good combo o cut some swirls and holograms and give a nice gloss or should use the orange pad instead ? Cheers!

@ForensicDetailing Жыл бұрын

Hmm ruoes yellow wool will out cut this for swirl removal. Foam tends to finish better but will cut less. So depends m8. Buy both and try.

@Giannakhs1313 Жыл бұрын

@@ForensicDetailing Im going an other road to use yellow wool with F6 from Koch and then finish an protect with P3.01 with finishing pad . I think thats the right way !

@owensteele1645 Жыл бұрын

MyCarCleaning still supplies Koch Chemie H8.02, £35 a litre.

@Rimtasveikejas 2 ай бұрын

P6 vs F6 wich one paste is better?

@tucker68red Жыл бұрын

where can you buy these pads at the price shown in the video ? seem to be far more expensive on Amazon and Ebay ...

@ForensicDetailing Жыл бұрын

In2detailing or slims m8

@tucker68red Жыл бұрын

@@ForensicDetailing thanks dude..

@jonnyb4271 Жыл бұрын

Hi John- given the choice would you use this over M.U.C?

@ForensicDetailing Жыл бұрын

Muc?

@jonnyb4271 Жыл бұрын

@@ForensicDetailing meguiars ultimate compound

@mbrunskill 2 ай бұрын

Does this orange pad sit between red and yellow or yellow and purple @forensicdetailing

@ForensicDetailing 2 ай бұрын

Hmm red and yellow

@waynegodwin7929 Жыл бұрын

Can I only use fine cut f6 01 then wax to finish ...

@ForensicDetailing Жыл бұрын

Yes m8

@dougmoonshine Жыл бұрын

They do a pack of 5 2" pads (1.78) about £26

@ForensicDetailing Жыл бұрын

Where from doug

@dougmoonshine Жыл бұрын

@@ForensicDetailing Slims detailing. I've seen them somewhere else online. I bought the whole set, haven't had a chance to use them properly.

@georgehibbert392 Жыл бұрын

Would you say the one cut and p601 is ok for first timers? Had the car 2 years and think it’s time for a good polish a lot of swirls around the whole car (nothing too deep)

@ForensicDetailing Жыл бұрын

yes mate.

@georgehibbert392 Жыл бұрын

@@ForensicDetailing nice one do you think 1 pad will be alright for the whole car or worth getting 2?