Making Brass Machinist Hammer

Рет қаралды 619,299

Күн бұрын

Making brass machinist hammer from brass bar with bog oak handle. There I try to show all steps how to make this hammer in the video.
00:00 - making the hammer
12:05 - assembling the hammer
Thanks for watching!
Leave like, dont forget to subscribe if you enjoy watching.
Please share this video with friends or anyone who might be interested!
12:50 - hammer overwiev
★You can buy all my works at my ETSY shop: www.etsy.com/shop/KossWorkshop
●Follow me ●
Twitter ▸ / koss_workshop
Facebook ▸ / kossworkshop
Instagram ▸ / kossworkshops

Пікірлер: 164

@diytoptricks 4 күн бұрын

This video is a masterpiece! The way you demonstrate the process of making a brass machinist hammer is both informative and captivating. Your attention to detail and skillful execution shine through every step. I'm truly grateful for the effort you put into sharing your expertise with the world

@andrejohnson6731 2 ай бұрын

This bog oak handle is phenomenal ❤

@dannirr 6 күн бұрын

Extraordinary timid cuts in brass. Great end result.

@jerryjohnson4618 2 ай бұрын

Very elegant brass hammer.👍👍

@kerlysproject 2 ай бұрын

excellent finish, great precision

@johnreid2837 Ай бұрын

It turned out beautiful .

@johnbradford9235 2 ай бұрын

What a treat to watch Mr. Koss make something just as beautifully finished as always, but not a sharp edge in sight 😁. 😎

@ProfessionalHokkaido Ай бұрын

制作工程は見ていて飽きませんね。

@billyfoster3223 Ай бұрын

Great work, Mr. Koss! Beautiful hammer! Cheers!👍😀🛠️🔧

@RonyVered Ай бұрын

What a beautiful job🙏🔨

@drucker03 2 ай бұрын

A really nice looking hammer! But working on a fast turning machine like a lathe wearing gloves can be pretty dangerous. It can cost you a finger.

@theajthomas Ай бұрын

Those are just nitrile gloves. They will rip if you look at them the wrong way. No real risk of them pulling your finger in if they get caught.

@aizel330stream Ай бұрын

@@theajthomasI wish you were right but these are not nitrile gloves unfortunately... are heavy duty rubber gloves 😅

@RedAreshan Ай бұрын

also making the entire head out of brass instead of having just the faces be brass inserts means your going to have to re machine a new head after 4ish months if you actually do a lot of work with it

@drucker03 Ай бұрын

@@RedAreshan It really depends on how much tapping you do. Maybe an insert would be better. But then I would avoid brass because brass bounces a little and that isn't anything you want while tapping pieces in with a machinist hammer. For an insert I would prefer copper. (Nevertheless: The hammer looks great.)

@thefreedomwarrior Ай бұрын

🙄

@ernestsabate56 Ай бұрын

Felicitats ! es una obra d'art👏👏👏

@husam_gray Ай бұрын

Amazing work

@angelremigiocardenasgutier2422 2 ай бұрын

Felicitaciones, muy hermoso y práctico. 👏👏

@LaraCroftCP Ай бұрын

New favourite Wood discovered!

@UlyssesDrax Ай бұрын

Cleanest work I've come across on KZfaq. I love the accuracy.

@Nashvillain10SE Ай бұрын

Beautiful!

@josetorres633 Ай бұрын

fora de série, parabéns

@SiTengoTiempo 2 ай бұрын

Neat! But I’m not understanding why you preferred to use a screw to fasten the handle to the hammer head rather than the more common technique of inserting a wedge. Was it for looks?

@hmsips9931 2 ай бұрын

Agreed with that… I’m guessing he’s making a hammer to set work in his milling machine. It’s not heavy use and wouldn’t need more than the bolt

@Gus0046 2 ай бұрын

Muy bonito, buen trabajo. Te felicito 👏👏😉

@wolfdiy 2 ай бұрын

Very beautiful congratulations 🎉

@pjhalchemy 2 ай бұрын

Nice Koss! Liked the socket head cap screw instead of the typical wedge. Quite the hunk of Bog oak @¿@...makes beautiful contrasts with brass and steel pieces. Thanks always for you great content and creativity.

@SimeonCogswell 2 ай бұрын

But the hole was drilled out, it doesn't spread the wood so it doesn't do any.

@pjhalchemy 2 ай бұрын

@@SimeonCogswell Good point. Agreed at some level but at 10:58 when he drills the counter bore with a drill bit (118°/135° countersink) it doesn't look like the depth is necessarily the same as the head height and at ~12:00 it looks like he may be cutting a taper ~2° on the head of the bolt?? Also my guess is the hammer head is maybe ~4oz and the press on fit he did should be enough to compress it enough for that small, light use. With all that said I may have put a bit of epoxy on it during assembly, just in case and it's still a pretty little light duty hammer.

@vinceianni4026 2 ай бұрын

Hello Koss beautiful hammer beautifully done

@mashurmunir Ай бұрын

Amazing work👍

@user-gp2px8kr5d 2 ай бұрын

Wow. I really admire your lathe and milling skills. The precision and attention to detail is outstanding. Well done Sir 👏

@merkyworks 2 ай бұрын

Super nice!

@user-gb6oy6mo6p Ай бұрын

Головки болтов забиваются цветной стружкой ,работа сверла без охлаждения тиски и станки большой лайк

@user-xd7zk1pw5y Ай бұрын

Love your use of the parting tool, if it works, do it

@raziel3726 2 ай бұрын

Amazing Craftsmanship 👍🏻👍🏽👍🇬🇧🇬🇧

@jakewhite6518 Ай бұрын

A piece of art😊

@mortem-tyrannis 2 ай бұрын

Fantastic.

@williamsschwakes9586 Ай бұрын

Your work is creative

@zadarik Ай бұрын

Отлично сделал!

@dominikrodler8010 Ай бұрын

Beau-ti-ful! 😯

@geraldstamour1312 Ай бұрын

It's hammer time, Koss!

@tariqkamil7853 2 ай бұрын

Gorgeous

@michaelandersen7535 Ай бұрын

What a beautiful wood, I've never come across it before

@ateeate Ай бұрын

It's not a different type of wood; it is oak, that was conditioned under bogs of rivers, lakes, swamps, etc. for long enough that it stains black and hardens.

@MCsCreations 2 ай бұрын

Stunning hammer, man! Really beautiful work!!! 😃 Stay safe there with your family! 🖖😊

@Koss-channel 2 ай бұрын

Thank you very much!

@user-yi2mc1lu3w Ай бұрын

Que barbaro. Eres Un titan.

@apistosig4173 2 ай бұрын

Wonderful

@user-xm9hf1fy2h 2 ай бұрын

Very nice👍

@blacksmithkh7274 Ай бұрын

It really good, thanks for your video Sir.

@karakairasa2161 Күн бұрын

Thanks

@Wattoist 27 күн бұрын

Looks great - a quality job! Is there any chance of getting a copy of the drawings for this? It would make a great school project.

@BALDA8511 2 ай бұрын

Безискровый инструмент очень нужная вещь в шахтном производстве, БРАВО!

@tedh.8356 Ай бұрын

Good Job !

@orlandosanfeliz2956 Ай бұрын

Exelent job.😊

@coleey00 2 ай бұрын

Very cool video

@Timber2Toothpicks Ай бұрын

I wish I was you! That was just too cool. Very Nice Work.

@stephaneneron Ай бұрын

That hammer turned very nice. Great work. The only thing I suggest you it to give a proper view of your work at the end to showcase your art.

@Jakob47recordermaker 2 ай бұрын

Very nice. I think I'll build it

@LYMDBearing Ай бұрын

Beautiful

@fidamuhammad5095 20 күн бұрын

Very nice

@RaulGonzalez-jg8ks Ай бұрын

Ke chingon es hacer ese tipo de trabajo, cuando c tienen todas esas herramientas. Muy bonito.

@skidadle2568 22 күн бұрын

Awesome

@yucelustun1578 Ай бұрын

beautiful

@dropkick127 Ай бұрын

Well done

@Zarbaft2 Ай бұрын

تماشای تولید وسایل بسیار لذت بخش است

@user-ul8oo1xk2k 2 ай бұрын

Привіт як завжди класна робота, маю маленьку пораду при роботі з цінними породами дерева краще клеїти до заготовки кусок простого дерева і за нього вже тримати в токарному патроні, щоб не пускати лишнє в стружку.

@kawasakiwhiptwo5821 Ай бұрын

Beautiful result. But is one side of the striking surface wood?

@joewhitney4097 2 ай бұрын

Beautiful Machinist Hammer. I would be hanging it on the wall, not beating anything with it! 🙂🙂🙂

@SimeonCogswell 2 ай бұрын

Wait, what does the screw going through the handle do?

@moehoward01 2 ай бұрын

Causes the wood to expand slightly, making the handle tighter in the head of the hammer.

@Sphendrana Ай бұрын

🖤 Black Wood is Best Wood 🖤

@JohnSmithi726 Ай бұрын

That's what she said.

@maxo9711 2 ай бұрын

Good job

@Koss-channel 2 ай бұрын

Thanks

@namerequired4881 2 ай бұрын

You have so many tools and machines in yor workshop. Can you give us a list of what you use?

@davidstout7846 14 күн бұрын

Beautiful!!! What is the Ebony wood?

@jellopuddingguy123 Ай бұрын

Great work but is wearing the gloves when machining on the lathe a safe idea? Be safe!

@_AvaGlass Ай бұрын

And a bandsaw too! Yikes!

@Fortunes.Fool. 2 ай бұрын

3:18 I was wondering how you'd get the curve. You don't need to lubricate tool head when cutting brass on a lathe?

@andreyt8949 4 күн бұрын

The wooden insert will crack at the first blow!

@crossgrainwoodproductsltd9230 Ай бұрын

Beautiful! That block of ebony must have cost you a small fortune!

@richardschneider4775 2 ай бұрын

beauty

@galaxiedance3135 Ай бұрын

I made a Copper Hammer as an apprentice. The Tool & Die Maker told me it looks like crap. I told him that I know it does, it's intentional. I made it not the most comfortable and definitely not the nicest because then nobody would want to borrow it from me :) That's the reason. It was heavy enough that it got the job done and that's all I cared about. I can make amazing looking tools if I want to but in this case... I didn't. hahaha

@strokerace5468 2 ай бұрын

Badass

@georgefokianos7729 2 ай бұрын

Thor must be jealous!!!!! Excellent work!!! Congratulations

@Voicesofjake 2 ай бұрын

Looks incredible as always! But I'm not understanding how that screw is doing anything to keep the hammer head on the handle.. It's just screwed into the handle below the eye of the hammer, so the head could just pull right off, and the screw would be left there in the handle right? Unless it somehow expanded when you drove it all the way down and acted like a typical wedge does and pushed the wood out into the sides of the eye of the hammer! (But didn't look like it did.) I'm an axe guy so I use wedges all the time and understand that, but can't wrap my head around this screw method. 😂 Sorry!

@Koss-channel 2 ай бұрын

As you may have noticed, I am turning this screw on a lathe to a taper. This way, when I screw it in, it wedges the top of the handle and holds the hammer head firmly in place. Perhaps it should have been filmed in a close-up to be more visible

@Voicesofjake 2 ай бұрын

@@Koss-channel I was thinking that! And you're incredibly talented so I figured you didn't overlook something like that. A cool and interesting way to "wedge" a tool!

@MS-bh7ok Ай бұрын

What is that amazing black wood called?

@kentcostello5286 2 ай бұрын

That's too pretty to use its a work of art. 😂

@themessenger8656 Ай бұрын

You can't have cake and eat it too

@Juan-op1pd Ай бұрын

@@themessenger8656😅

@user-nh3ep9ck4y Ай бұрын

@saini_sahab_g_blogs Ай бұрын

❤❤ Varry nice ❤❤

@madwilliamflint 2 ай бұрын

Awesome! God I hate machining brass. It's like trying to cut gum with a saw. But it looks so good.

@user-kl5iw8tn3f 2 ай бұрын

это, похоже, не латунь, а бронза сыпучка!.

@madwilliamflint 2 ай бұрын

@@user-kl5iw8tn3f That's what I always say. *blink blink*

@sims76 2 ай бұрын

Copper & bog oak, Nice color

@peterlesnicky9449 Ай бұрын

Aké drevo ste použil na výrobu násady?

@alexandernachnahme3132 Ай бұрын

I've already seen a lot of things. but I see the CNC file for the first time. I've already seen a lot of things. but I see the CNC file for the first time.

@paulmanhart4481 2 ай бұрын

What kind of wood? Ebony?

@xX_Gravity_Xx Ай бұрын

Am I thinking of another materal, or isn't Brass really soft for a hammer?

@MaxG628 Ай бұрын

What wood species is that?

@toumicarlos4037 19 күн бұрын

👍👍👍

@stephenfitts9750 Ай бұрын

Do you every work on commission?

@zinovyitskovich3578 Ай бұрын

Что делать, если такие молотки уже есть в продаже? Что делать, если дома уже есть такой молоток? В магазинах для ювелиров такие молотки навалом, что делать?