Рет қаралды 23,330
The climate control fan motor stopped blowing on several of the switch settings - this is usually the blower motor resistor that goes bad. The resistor unit is located behind the glove compartment and is attached with two 5/16” hex screws.
This job is extremely easy and only requires a few common hand tools to do.
1/4" drive ratchet, 5/16” Socket, Pry Tool.
Motorcraft YH-27 A/C Blower Motor Resistor
Part #: 7L2Z-19A706-A 4827930
Part from Amazon: amzn.to/3nUa8dY
As an Amazon Associate, I earn from qualifying purchases.
@0:59: Blower Motor Resistor Location
@1:54: Blower Motor Resistor
@2:52: Making some room to remove the part
@4:21: Pulling it out
#fordexplorer #autorepair #blowermotor
Music: "Chiefs" by Jahzzar
Licensed under a Creative Commons Attribution (4.0) license
Under CC License creativecommons.org/licenses/...
Available at: freemusicarchive.org/music/Jah...