KRX 1000 - mounting new tires on your beadlocks
Рет қаралды 11,427
3 жыл бұрынSorry it's so long! The biggest issue we see are people incorrectly mounting their beadlocks and dealing with leaks...so we wanted to cover as much as we could!
These are KRX torque values, so make sure to check your manufacturer for the right ones if you aren't wrenching on a krx
our site for weights/belts/etc
www.rightcoastoffroad.com
@boblaws9851 3 жыл бұрын
A couple of tips to add. Soapy water works as well for lubing the bead to put the tire on the rim, and then again when you are ready to air up and seat the bead. Also, set the bare rim on a 5 gallon bucket to install the tire, and when airing it up. If you have ever seen a tire blow off of a rim, you would never even think about straddling it to put pressure on the rim to seat the bead. If you set it on a bucket, the weight of the tire will seal it evenly to start taking air.
@rightcoastoffroad 3 жыл бұрын
I have seen tires blow off of beads, its scary! We never went over 20 psi seating these beads, so I wasn't too concerned.
@Boingdande 3 жыл бұрын
Great vid. Should have watched this before asking dumb questions today.
@peterkueffner747 3 жыл бұрын
Good info. I learned the hard way on my factory CanAm beadlocks that if you don't follow what you showed, the rings can crack. Those are my dream tires, please do a complete review on them. Looking forward to the tender springs. Btw, your links are not clickable.
@rightcoastoffroad 3 жыл бұрын
Will do on a full review! And thanks for the heads up on the links!
@OdysseyOffroad 3 жыл бұрын
Hey i noticed you have the factory springs on. Did you take off the bandits?
@rightcoastoffroad 3 жыл бұрын
We have factory lowers and our prototype tender springs. The bandits are great! But we also wanted to try out a tender spring only kit and offer that for people who don't want to spend the money on a full spring kit.
@martinwalkowe9298 Жыл бұрын
I wish that I saw this video before I paid $30 to mount one tire!
@rightcoastoffroad Жыл бұрын
I know a guy Mr Walkowe! 🤣
@donniecohrt3655 Жыл бұрын
Where did you get the tires from. Didn’t see it in description…
@shannonstiles8751 2 жыл бұрын
🇺🇸
@SpeeeedyG 3 жыл бұрын
How did you remove the tire? The video starts with the bare rim.
@rightcoastoffroad 3 жыл бұрын
Unbolt bead lock ring, then use a tire machine on the other side. They have cheap hand operated ones at harbor freight for like 40 bucks.
@easye0212 3 жыл бұрын
So I just got my new km3 tires to go on the factory krx beedlocks... Bolts seem to short or tire to thick.... Either way what's the fix?
@rightcoastoffroad 3 жыл бұрын
You can grab longer bolts. Dkd you get the truck version or the utv version?
@peadookie 3 жыл бұрын
Curious on this as well, as I'm considering the KM3s
@Th3Pnsh3r 3 жыл бұрын
Any updates on the km3 ? Strongly considering the tire too
@CarbonCountyBuilds406 Жыл бұрын
@@peadookie I just got done doing the truck km3 and all you need to do is the same thing he is but get 1/4 inch longer hardware from Tacoma screw it was 71 dollars for all 64 of them
@peadookie Жыл бұрын
@@CarbonCountyBuilds406 nice man, I appreciate the follow up and info! How you like the tires?