That is incorrect. The motor IS a Neodymium. Material is a Bonded NdFeB which doesn't require Chrome coated process. Please look it up.

Nice review man. This is the best one on krytac I've seen so far!

9:20 I believe I can put into words what you're trying to convey: "I'd fuck these gears".

What you were saying about lipo ready surprised me as I went to a KRISS USA form to see if I could run a 11.1v in mine and I was told that that’s what they use to test their guns

Thanks for the great review. As with most people, I would like to maximize range and accuracy on my Krytac SPR. Do you have any personal upgrade recommendations? Thanks.

Could you do a review on the ARES amoeba internals? I would love to see your opinion on it.

Any upgrades you’d recommend? I may do a piston upgrade (SHS High Strength Polycarbonate Piston w/ Steel Teeth for Airsoft AEG Gearboxes (Type: High Speed Lightened / 15 Teeth) I want to make sure the lmg when I get one has all it needs and make sure it won’t break on me or anything

Which gearbox is more reliable. The vfc avalon series or the krytac mk2s

I have a krytac and I'm also having a feeding problem on full auto. So I'm taking your advice and getting a delay chip. But their are some made different, which delay chip do you recommend me buying?

Great review, man. How did the Sector Gear Delayer Chip work out?

Can you comment on the spring on the spur gear? I have heard that those selfshimming gears are pretty bad.

would this gearbox and motor work in a hk 416?

TheAirsoftTech can this type of hop up be flat hopped? If it can, is the procedure the same as described in your flat hop tutorial? Would it be worth flat hopping? Thanks in advance and nice vids btw. They're very helpful and informative. They're especially helpful to people that don't know anything about airsoft tech such as myself but I'm starting to get a good grasp on it now. SUBBED

Awesome video my man.. Thank you very much!! Very well done..

I've been shooting .32s through my krytac with a stock hopup and stock bucking. No problems at all. I have the mk2

Quick question! I wanted to put a longer barrel on it. stock the spr comes with a 380mm barrel, i wanted to put a Edgi 455mm barrel on it, either 6.04 or 6.05 inner diam. Will there be enough air volume in the chamber for that? I know the air ratio is important for accuracy. If im changing The barrel by 100 mm or so, will I have to tweak something else?

TheAirsoftTech how did you fix the feeding problem or round skipping on full auto? Mine still does it.

So I just got mine on Friday. I'm new to airsoft so I don't know too much yet. I used it Saturday and was having some issues. If I fired too fast in single fire mode, the bbs would just start to drop a few feet ahead of me instead of firing in a normal straight path. I adjusted the hop up and switched to. 28 bbs and it did a little bit better.

Would you or should i upgrade an Alpha CRB with a "Maxx Model CNC Aluminum Hopup Chamber for M4 / M16 Series Airsoft AEG Rifles (Model: ME - PRO w/ LED / Limited Edition Red)"?

First off love your videos they have been a great guide for me. So I picked up the krytac SPR with PDW Upper bundle. Greatest deal on the market by the way for anyone looking to buy new gun. So I'm looking to maybe start upgrading them. So the PDW right now shoots 335fps with stock 155mm gonna upgrade that to 185mm 6.03 which will hopefully put me closer to 350fps and hopefully get tighter groupings. That one is fine think that will do what I want. Real question is on my SPR setup. It is shooting right at 398fps and is stock with a 383mm 6.05 inner barrel. Now I don't want to go above 400fps to stay in field limits but want to increase my groupings and accuracy at further range. My best guess is to get this 370mm 6.03 and that will hopefully get me what I want and still keep the fps as close to 400fps without going over. The next size up is 407mm which would make it more accurate and better groupings but feel I would definitely end up over 400fps. So there's that then next thing is can all the stick krytac internals handle putting in a lonex a1 at 45k?Please let me know your amazing insight on this and sorry for long in depth comment

Mine is perfect in full auto. Mind you I have the mk2

The Krytac 30k motor is a neodymium magnet motor that can pull m150 spring with ease. When using a m120 spring is even more easier to use. So you don't need a strong battery to turn the motor. Normally a 15c - 20c will work just fine. When you use 25c, you are giving a lot more power to the motor to spin. Hence the stock m120 spring aren't enough resistance to stop spinning. If you want to use 25c, pair it with a m130 spring or m140 spring. Then again, when you use high tension spring, you have OTHER concerns like using solid bushing instead of the bearing. I know this because an official staff member of KRYTAC told me. (Kriss Allen told me)

Hey I'm a simple guy looking to fully understand all the nuts and bolts of all the parts and functions of airsoft rifles, it would help if u made a entire series of tutorials of going over different parts of the gun and fully go through like what's the function is, and how they will change your build, and also a full understanding between all these sector gears and mosfets, and everything because I'm looking to make a perfectly function rifle that will last long, fees rounds without a hick up, and know how to fix a problem when I need to

background music on point samurai shampoo

so, other than a way cooler MosFET, maybe correcting a bit of the AOE and shimming, what exactly do Umbrella do to the ones that are being sold by Evike for 1G?

I have a trident series spr 47..no auto issues..I just bought it tho. Test fired in house..I have 11.1 Lipo 1100 mih. Would it have same gearbox as video?

Dude can you take a picture or just highlight the areas that need to dremeled in the krytac lvoa gearbox. I cannot seem to find this info anywhere. Also can the hop unit be switched out to a non rotary style hop unit without mods? If not what are the mods

Hi. Does the mosfet protect lipo battery from fully discharging?

2 years later, feedback on krytac?

I have Lvoa S, what is max spring power for it? Want update only spring first.

If I change the inner barrel to 500mm, for better compression, would you suggest changing the cylinder to an unported one? @TheAirsoftTech

Una pregunta amigo por que se me queda el pistón colapsado atrás y el muelle recogido después de un disparo en semiautomático entiendo que en full auto suele pasar y lo cambias a semiautomático y das dos disparos y se libera el muelle pero en mi caso no??gracias

i have this in my crb Wolverine Airsoft SMP HPA Airsoft Unit for Ver. 2 Gearboxes The Wolverine Single Moving Part (SMP) is a drop-in HPA cylinder replacement unit that combines the intrinsically powerful performance of an HPA system with a smart, simple design that provides unsurpassed convenience and versatility. By removing unnecessary complexity, the Wolverine SMP offers all the advantages of a high-performance HPA system but without the headache. This is what truly sets us apart from our competitors. Features: Fits virtually any Ver. 2 gearbox (ver. 3 kit not included) One moving part provides increased reliability Adjustable velocity, rate of fire, and burst settings Instant trigger response with no first round dry fire Superior air efficiency FCU full time sleep mode The SMP includes a custom made and exceptionally compact 500mah 7.4V lipo with built in PCM (protection circuit module) to prevent over-charging and discharging the battery. Length:6.5 inched Weight: .5 pounds Fire Modes: Semi/Full-Auto, Safety Package Includes: Gun, battery, manual, wiring, buffer tube adapter, V2 trigger board Manufacturer: Wolverine Airsoft

I totally agree. the stock air nozzle that Krytacs have aren't very good.. what kind of Air nozzle would you recommend? was thinking of a SHS Air nozzle.

Compared to the krytac, the ics transform-4 is a good one?

i believe the gold color is actually because of a nitrite coating. Extremely impressive. Dont quote me though.

I had the same issue with the feeding issues. I got some decent G&P mags and now they feed perfectly. :) Is there an high-speed motor upgrade you can recommend, or would you say that the one it comes with is just fine?

if you put a dsg in a krytac would it run it well or would i need to modify the motor or spring?

Good review love this Gun

Newer lrytacs have orings in there nozzels but i bought 2 new keytacs both had low fps issues under 320 fps bpon both out the box and 1 was semi locking and i was useing 7.4 and 11.1 titans but the low fps wasent a spring or compressions and air seal issue it was the gearbox was dry like cylender piston head the tracks on tne piston and gearboxs shells were the piston rides on and gears also dry once i oiled and greased it fps is at 400 to 405 on both my guns and one issue was the motor on both would heat up with light supressing onnsemi auto so swapped them for warhead motors other then that the inner barrel motor and trigger comtacts/mosfet were replaced with titan warhead and perun v2 hybrid and promi 6.3 275mm inner barrels befor i got my new ones in spring of 2023 but i do like my krytacs as i have 3 of them

you should do a review on the 2014+ Colt Classic Army M4 Carbine

the bearings are Japanese steel an you can get replacements for $35 on evoke (more than modify ceramics($30))

Hey dud. What are engine TPAs? If the number is high, would the engine be better? Thanks👍🏻

Any updates on this exact gearbox or any of your guns in terms of how they've held up?

I have a question. As i was pulling my innerbarrel out, i noticed there was a 2 CM little spring falling out of my gun. It is NOT the longer spring wich goes over your innerbarrel. Anyone knows where that little spring belongs since i totally do not have a clue whatsoever

Did you end up upgrading this one and to what effect?

Is the krytac SBR good? Not SPR, SBR. The $275 Ish one

ive heard the word "mosfet" so much recently and im curious. im extremely new to airsofting and am saving up for a gun at the moment, but i was wandering, what are the benefits of a mosfet unit?

Did the sector delayer chip fix the round skipping? Thats the only thing keeping me from buying the krytac...

How would you compare this to the Avalon ?

Does not having all metal teeth on the piston shorten the life of the gun tho?

You are not the only one with problems with full auto feeding. mine does the same thing. its almost like you have to burst fire it.

Like the music - nujabes

good music

The motor does have neodymium magnets but they have a different manufacturing process then other magnets thus making them black.

What is a sector delay switch and how do you install it? (If you have a video a link would be appreciated) I noticed mine stops feeding often with my LiPos in it.

What spring would u recommend to get your fps up to 350. I am personally going with an m100 but I am worried that it might be to low.

I am not sure, but I believe that the gold may be the result of a specific kind of treatment. I have seen some parts on military vehicles with the same appearance, and I have also seen it on starters in cars.

Do a review on the A & K S-System

will a aftermarket v2 gearbox fit in a krytac

Completely detailed video, congratulations ... I have a question, what is the original spring of this gearbox? (M90, M100, M110 ...) Does this kit of both motor and gearbox support spring 130 in a good way? Any recommended upgrades for this gearbox? Thanks in advance for your attention! One more subscriber!!!

My SPR doesnt feed well on full auto either, im using a 11.1v 20C Valken lipo and KWA K120 mags. It never misses a beat on semi though. Its not a huge neccesity but itd be nice to have it if your cut off chip fixed it lemme know.

What sector delays chip are you using

hey just so you know when you said the gun doesnt feed right on full auto, im honestly not sure what shitty mag u used because mine worked no problemo on full auto with a 11.1 lipo

what dsg ratio gear can i drop in this

The background song is nujabes arunian dance

How did you become so knowledgeable in the theory and functions of airsoft internals?

Some times mine won't feed on full with a 9.6

well i got a problem. i rhop the hop up and but 6.03 madbull berrol and now my hop up can t be set up well. i set hop up on 7 and it felt like i put hop up on but when i put it on 8 bbs going sky high. i think to swap the hop up. Can you guys help me

subscribed btw!

When you add the delay sector switch and if it works let us youtube viewers know with a video.

what is the song after the intro?

I'm trying to upgrade my krytac lvoa how should I up grade the gear box?

So judging form the video you would choose bushings over bearings?

Dig the classic ASTkilo23 music ;)

Can I use a WARFET?

Would a ProWin, prommy purple bucking and a Black python 6.03 increase the range and accuracy of a Krytac?

Is the 11.1 ur running a 20c ?

The Krytac pro shop as well as employees of Kriss/Krytac have said they are neodymium. While I want to believe you I don't think they would blatantly lie. How can you tell that they are ferrus and not neo? Not saying you are wrong but I am just very skeptical. Great video though BTW my crb and my 2 friends gun's feeds full auto

im prob going to aim for 410 with .25s i have a fully stock crb and was wondering what all id have to upgrade i use a 9.6 NimH battery please help thanks!

Cool.. Hey that's cool... It's really cool... It's kinda cool.. A really cool touch... It's a cool color... That's cool... That's really really cool!... It's just really cool... Really cool plus... Pretty cool stuff... But it's cool... It's pretty cool... It's really cool... Ok, now I'll finish watching the last half of the video

Deose anyone know how heavy the gun is?

Im going for trident mk2 whit short and long upper

Can anyone tell me if the piston has a ball bearing inside to keep spring from binding?

What's the heaviest spring a spr can pull stock?

Bruh, that nujabes vibes in the background :3

Could i run an m170 on this with an upgraded motor, i would be using semi only.

My gearbox do have the KRYTAC logo in it but not the goldish color on it. Why?? :S

What is the name of the song in the beginning of the video?

I dont get it why not full metal piston teeth? wont the plastic teeth it wear over time?

so I have a question.... in the first part of the video you said you need to reshim and correct angle of engagement. then you said they were near perfect. then you said they need to be fixed. then you said they were perfect.... so... which is it?

aim has a gold aluminum gearbox

My CRB pulls my M130 spring just fine, with a flat hop and .38 it hits 275ft pretty easily.

hi , is this gearbox 11.1 lipo ready???

So, they're not quite as extraordinary as people say. I'm not saying it has bad internals, those are definitely good internals, but at the same time I don't really see anything extraordinary. The most interesting feature is the in-gearbox 3034 mosfet.

So, is this THE BEST stock gun i can buy

The gear box shell is coated with an anodized layer to prevent rusting of the shell prolonging longevity

So I have an spr and I want to drop in a DSG in there. Do you think that I will have to buy a new bevel and spur gear or can I run the dsg off of the ones in the krytac?

well.. kwa gets beat cause only the mosfet? other than that kwa doesnt need shims, brass 6.03 and the thickest gearbox on the market

id just like to say that by the look of it that gearbox is hex chromium plated and not Rohs compliant , illegal for sale in any country where Rohs applies