Airsoft Krytac Trident mk2 Disassembly - Internal/External
Рет қаралды 22,699
3 жыл бұрынStay tuned for the follow up assembly video.
let me know if you have any questions.
subscribe ;)
@oysterboi3652 3 жыл бұрын
Nice video! Straight to the point and has a good flow. Keep it up!
@NickCornwell 3 жыл бұрын
Thank you!
@andreasdersch76 Жыл бұрын
Hi. Are there any problems with gearjams without the Gate Aster? Thanx 👋
@djklermundable 9 ай бұрын
PERFECT thanks
@Nick-bp5ir 2 жыл бұрын
Is it even possible to remove the forward assist? I want to replace my current one... No luck unless I'm doing it wrong? Any help?
@derickdarvin1572 Жыл бұрын
is mk2 has a r hop patch inside its stock inner barrel?
@nikhillingem 2 жыл бұрын
do the gears come stock with auto-shims?
@Isaiah32Gaming Жыл бұрын
I took off the safety, but now the right side won't screw in, it looks like there is not even a spot where the screw would fit, any idea why?
@josiahtaylor8669 2 жыл бұрын
Hey what gears and piston were stock in your Krytac? I’m looking to buy one and installing an ultra speed warhead brushless motor because I want to build an ssg high rof aeg.
@NickCornwell 2 жыл бұрын
Stock gears will do just fine! The krytac shell is not good with aftermarket gears
@MegaChickenPunch 2 жыл бұрын
waste of cash. Just get ASG Custom 40k
@Bruh-gv6zt 2 жыл бұрын
Is this disassembly the same as the krytac pdw m mk2?
@NickCornwell 2 жыл бұрын
Yes! Exactly the same!
@AZ-FPV 2 жыл бұрын
Is that a MAXX Nozzle? if so *what size" please? 21.25 or 21.50 mm? Thanks.
@NickCornwell 2 жыл бұрын
Hi! It is actually a shs red nozzle 21.4mm! Please subscribe if you haven't already! Let me know if you have any other questions!
@jackdiston7768 3 жыл бұрын
How do I take off the side door to access the hop up
@NickCornwell 3 жыл бұрын
Hi! I'm not sure I understand your question. In order to access the hopup you must separate the upper receiver from the lower receiver (shown in the vid) Once separated you simply pull the hopup/innerbarrel out The inner barrel/hopup are located in the upper receiver. Let me know if this helped.
@jackdiston7768 3 жыл бұрын
@@NickCornwell it’s all good mate, thanks for the response tho. I needed to remove the dust cover so I could respray it, I found out there was a little C clamp I needed to remove.
@NickCornwell 3 жыл бұрын
@@jackdiston7768 Awesome! Glad you figured it out! Thanks for watching.
@sgtdomimixedcontent6384 2 жыл бұрын
M8, i have a question: i let a airsoft shop build in a gate aster into my krytac, now the anti reversal locks after a few shots, i think they forgot the small plastic piece of the anti reversal, could this be the reason?
@NickCornwell 2 жыл бұрын
Yes. A peice could be missing. Or it wasn't installed correctly. How does it sound? How does it lock up? Could you explain a little more? Thanks for watching my video! Subscribe if you haven't!
@sgtdomimixedcontent6384 2 жыл бұрын
@@NickCornwell well, it runs fine for about 20 rounds, and then the anti reversal latch engages and i only hear some gear spinning or maybe the motor trying to spin, then i just need to unjam the anti reversal latch, and then it runs again for about 20 rounds
@sgtdomimixedcontent6384 2 жыл бұрын
I also found the small plastic piece of the anti reversal latch in a small bag of old parts
@NickCornwell 2 жыл бұрын
@@sgtdomimixedcontent6384 what does the peice look like? Is it like a small white donut looking?
@sgtdomimixedcontent6384 2 жыл бұрын
@@NickCornwell yep, exactly like that
@fosterbessette9080 2 жыл бұрын
My pin won't come out so it won't come out from the upper how to fix?
@NickCornwell 2 жыл бұрын
Which pin exactly?
@fosterbessette9080 2 жыл бұрын
Nvm I got it but thank you anyway. Sorry
@NickCornwell 2 жыл бұрын
No problem! Glad you got it!
@Beforethecitadel 2 жыл бұрын
i can't for the life of me get the mag release screw out i've tried 5 different screw drivers none seem to work
@DavidRProductions172 2 жыл бұрын
Looking to upgrade my krytac and I know very little. what is the name of your mosfet? Aster something?
@NickCornwell 2 жыл бұрын
Yes. Gate Aster. I would recommend keeping the stock gears and using lonex or Maxx compression parts!
@DavidRProductions172 2 жыл бұрын
@@NickCornwell awesome thanks. Can you further elaborate on the compression parts? (What they do) Would you happen to have a link for that as well?
@DavidRProductions172 2 жыл бұрын
@@NickCornwell also I’m looking at the gate aster and do you have a front or rear wired module?
@NickCornwell 2 жыл бұрын
@@DavidRProductions172 rear wire. And the compression parts are the cylinder, piston head, cylinder head, and piston. I get my parts from Evike.com Brillarmory.com Ampedairsoft.com
@DavidRProductions172 2 жыл бұрын
@@NickCornwell great. Thanks!
@nicholasperez4969 2 жыл бұрын
I don’t understand how you slide the stock off so easily. I can’t take it off to save my life
@NickCornwell 2 жыл бұрын
You have to pull ALL the way down on the lever. Not just enough to adjust it, but all the way so that it slides off
@uncleowen7918 2 жыл бұрын
bruh do exactly what you do and my stock will not come off its blocked by something
@franklinmateo9994 2 жыл бұрын
Catjam
@MegaChickenPunch 2 жыл бұрын
Dude it's not even stock krytac...
@NickCornwell 2 жыл бұрын
Literally the same parts tho... nothing changes
@MegaChickenPunch 2 жыл бұрын
@@NickCornwell well the stock piston doesn't have full metal teeth.
Лаборатория Страйкбольного Тюнинга
Рет қаралды 1,7 М.
Surreal Reviews
Рет қаралды 6 М.