Excellent vid. I did the install but added an 11 oz flywheel weight and the up-graded Ricky Stator 70W Stator. The White map is XCW-like now but the Green map did not change.
@CrashHardEnduroАй бұрын
Thanks for this! I’m obsessing over next years bike, and I want a mix of xc and XCW.
@memphis28571 Жыл бұрын
I have the 11oz and I’m super happy. It eliminated all the low rpm stalls that plagued these bikes. Also makes the power much more manageable like you said.
@jdhart111 Жыл бұрын
absolutely outstanding how to vid!!!clear and consice, great stuff! thank you!
@jeremyslatton54438 ай бұрын
Great video! Appreciate the conciseness, humor, and video framing. I would note somewhere in your description that the flywheel puller needs to be an m28. I stupidly followed the rmatv recommended size for a 2024 te300 and they sent me a M26. Also noted that they don't have a drop-down for 23 or 24 xc nor tx. So jokes on me I guess. I figured the flywheels would at least mount the same on the motor.
@lostinpa-dadenduro7555 Жыл бұрын
Woah. That was a lot easier than I thought. I expected there to be epoxy and all kinds of weird stuff. 😂👍
@TechEnduro Жыл бұрын
You and me both!
@brettc43875 ай бұрын
fantastic review mate
@darinvanderpol3351 Жыл бұрын
Thanks, that's a great install video and review.
@rx2ride25911 ай бұрын
30 min install. Thanks for the video.
@philipsmith61528 ай бұрын
Much better way to install than the TPI which had to be heated up and bashed on. I went for the 13oz on the 300
@TechEnduro8 ай бұрын
I’ve heard. Thankfully, I never had to experience that!
@rx2ride259 Жыл бұрын
Great Video. I'll order mine today at work.
@PNWEnduro Жыл бұрын
I heard this guy was recently caught riding Sherco and now is searching for that Blue Bike feeling! 😉
@TechEnduro Жыл бұрын
Don’t you dare share that picture again!!🤣
@PNWEnduro Жыл бұрын
@@TechEnduro Pitcures*
@racesla Жыл бұрын
Thanks for the video, this will be my next project. Did you have your stator rewound by Ricky's or purchase a new one, if available? Thanks.
@TechEnduro Жыл бұрын
I got it from True North Motos. He bought a bunch of OEM stators and got them rewound from Ricky. That way I didn't have any down time with my stator being sent off. Once I got the true North one I sent mine back to him for $100 off. Worked out to be a touch more $ then direct from Ricky, but I didn't have to wait.
@racesla Жыл бұрын
@@TechEnduro Thanks I'll see if they have any left.
@grutzmac10 ай бұрын
Nice vid! How much is the Ricky stator rewind in the xc?
@TechEnduro10 ай бұрын
Works as advertised👍 70w is plenty for a fan on all the time and a light if you want.
@grutzmac10 ай бұрын
@@TechEnduro how Much money does it cost to have done?
@TechEnduro10 ай бұрын
Oh $ wise it’s $165
@aaronmcelhinney14362 ай бұрын
How did you get those graphics? I'd love a set of RB graphics!
@TechEnduro2 ай бұрын
Have a whole video about it. Check my channel 👍
@66AGW8 ай бұрын
My bike is slalling more often after i install the weight on my flywheel and it starts harder than before...
@TechEnduro8 ай бұрын
Strange. Never heard of that before
@MXJEFF944 ай бұрын
4:00 min mark...Did you say 60 NM or 16?
@TechEnduro4 ай бұрын
60
@Moto619films2 ай бұрын
Would the stock xcw flywheel fit on this I think it's heavier
@TechEnduro2 ай бұрын
No. Design is different because the stator is different too.
@gcally111 ай бұрын
Are you using a Rekluse? Wondering if the flywheel weight is needed with a rekluse? Also I am torn between a 11 and 9 oz. I do the same type of riding as you. Do you feel the 9 oz is spot on?
@TechEnduro11 ай бұрын
Not sure as I don’t run a rekluse. 9 does feel great though.
@gcally110 ай бұрын
@@TechEnduro Do you think the 7 oz or 9 oz might be better for the type of riding you do? I basicly do the same type of riding and don't know if I should go with 7 oz or 9 oz.
@TechEnduro10 ай бұрын
I’m really happy with the 9 ounce. That makes the flywheel weight slightly less than an XCW. I have a riding buddy that has the 7 ounce and he’s also happy so I think you can’t go wrong. I personally would go for the 9 though.
@railduke68 Жыл бұрын
Have you changed the stock gearing as well? Thanks
@TechEnduro Жыл бұрын
No, I like it the way it is.
@MXJEFF944 ай бұрын
Also what size fly wheel removal tool did you use?
@TechEnduro4 ай бұрын
Shoot, can’t remember.
@MXJEFF944 ай бұрын
@@TechEnduro Last question! Is stock a 7oz, and you installed the 9? The video is awesome!
@brettc43875 ай бұрын
anyone fitted to a 250 xc?? im thinking a 9 oz as well
@josephflaherty39184 ай бұрын
I put a 9 oz on my 23 250 XC. Hated it and pulled it off immediately after the first ride. It killed the bike. No snap dead feeling. Tons of engine breaking, screaming at cruising speeds so you have to shift up then can’t pull the gear so back to down shifting and screaming. It ruined my ride. I’m curious what the 7 oz would do
@speedtoad616710 ай бұрын
Why are pedal bikers so angry?
@TechEnduro10 ай бұрын
🤣
@user-vy7fh8lo6kКүн бұрын
Haha, i was wondering the same thing lol. They must not like 2-strokes. Make America 2-stroke again!