Kubota Excavator Maintenance - Final Drive Lube, Hydraulic & Fuel Filter | KX71-3

  Рет қаралды 33,028

Piney Grove Homestead

Piney Grove Homestead

2 жыл бұрын

How to perform excavator 500 hour service: Final drive lube, Fuel Filter and Hydraulic Filter change on Kubota KX71-3 excavator. Bonus 15
This is our Amazon store with affiliate links to products we use on the channel. It doesn't cost you anymore and it helps support the channel, THANKS!
www.amazon.com/shop/pineygrov...
Some of our favorite products on Amazon (affiliate links):
QC-Mate X-Boom Hydraulic Coupler Clamp: amzn.to/3MlLBfy
Proven Industries Trailer Lock: amzn.to/3WVzytv
Flex Tape: amzn.to/3R4MdWm
Mechanix Leather Gloves: amzn.to/3HjoZZf
Titan Post Hole Auger: amzn.to/3toHEx2
Ratcheting Fence Tensioner: amzn.to/3aEfSX0
Pope and Pipe Level: amzn.to/3tqUhHX
Fence Post Puller: amzn.to/3QbcNhy
T Post Manual driver: amzn.to/39dwt3J
Come Along Winch: amzn.to/3aQMqND
Clip bending tool: amzn.to/3xlqrG0
Mechanix Leather Gloves: amzn.to/3HjoZZf
6’ Digging and Pry bar: amzn.to/3vH5Agx
Dewalt 20V ½” Impact Wrench: amzn.to/3UOcXNH
Dewalt 20V brushless Leaf blower: amzn.to/3zwJcYm
Dewalt 20V brushless ½” drill: amzn.to/3HGXJ7z
Welcome to our channel! 🎥 What to Watch Next:
Fixing Leaky Pond: • Sealing a Leaking Pond...
Transforming Our Property: • Starting a Homestead f...
Clearing Thick Brush with Mini Excavator: • Excavator clearing THI...
Mowing Large Acreage: • How to Setup a Brush H...
➤FOLLOW US on Social Media:
Facebook - / pineygrovehomesteadand...
Instagram - / pghomestead
TikTok - / pineygrovehomestead
Our Story:
We are six years into a seven year effort of transforming 20 acres of "Piney Grove" in Northwest Florida into our dream homestead/mini farm to be filled with animals and joy. We plan to have a variety of miniature critters on our pastures, raise free-range chickens, grow fish in our pond, garden, plant fruit and nut trees, and harvest wild game. Our goal is
to escape the stresses of corporate life and embrace all that country living
has to offer as we enter the next chapter of our lives. Follow along on our
journey!
Thanks for watching and please Like and Subscribe to help our channel!!
Brad & Deb

Пікірлер: 60
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
Part of owning land is learning how to service the machines you use to maintain it. It saves you money, but more importantly saves you time in transporting equipment and keeps your equipment where it's needed -- on the farm ready to work!! If you missed it, here's a link to the day our excavator "Precious" arrived at Piney Grove: kzfaq.info/get/bejne/iqp7ptGCtJ_dqI0.html
@michaelmactavish4445
@michaelmactavish4445 2 жыл бұрын
kubotas deffently sures nothe come on done on that tight lol
@mikelanglais7493
@mikelanglais7493 Жыл бұрын
Suction filter is at the bottom of the hydraulic tank. You’ll see once you drain the tank. You should also change the pilot control filter while your at it.
@PineyGroveHomestead
@PineyGroveHomestead Жыл бұрын
@@mikelanglais7493 I believe that's the 1000hr service. We're a couple years from that.
@shawnwelborn8483
@shawnwelborn8483 Жыл бұрын
😊
@thepragmatic6383
@thepragmatic6383 Жыл бұрын
A well-maintained machine will serve you well over the years. My excavator is an old KX61-2 from 2002, I bought it used in 2014 and the first thing I did was change all the fluids and filters. The previous owner didn't seem to be really interested in maintenance given the color of the oils and the obvious lack of grease. But despite its 20 years, its engine purrs like a kitten and despite the Siberian cold of Quebec, it starts right away.
@PineyGroveHomestead
@PineyGroveHomestead Жыл бұрын
Very true...can't be cheap with maintenance...it will cost you double in the long run.
@KillingItCountry
@KillingItCountry 2 жыл бұрын
I do my own maintenance too but I’m a ways away from the 500 hour service on our 2021 KX040-4. Thanks for the sneak preview 😉
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
Probably just grease for you for awhile. Kubota makes it easy to track with the sticker under the seat!! Thanks for watching. B&D
@robc6310
@robc6310 2 жыл бұрын
This is great info Brad. Going to come in handy for my 500 hour service!
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
I thought Precious would sputter a little with both fuel filters changed, but with the bleed vent open, she never skipped a beat! Thanks for watching. B&D
@michaelmactavish4445
@michaelmactavish4445 2 жыл бұрын
@@PineyGroveHomestead kubotas are my most easyist brand to work on deere and newholland is a night merrior takes 6 and a half hour change oil in a newholland and deere because have to tear everything off wich is a pain
@stuartrance277
@stuartrance277 8 ай бұрын
The 3rd hole on final drive which you didn’t take out , is to fill with oil , no plate to fight with at that hole , the oil then comes out the middle hole with plate , when up to level 😊👍
@PineyGroveHomestead
@PineyGroveHomestead 8 ай бұрын
Good tip. The manual didn't show it that way but it was hard to fill the way I did it!
@andreistancescu1669
@andreistancescu1669 Жыл бұрын
Bine prezentat, multumesc! Greatings from Brasov, Romania
@PineyGroveHomestead
@PineyGroveHomestead Жыл бұрын
Thank you. We have an excavator playlist here: kzfaq.info/sun/PLG5yS75HLzo0v6LnCFxPlQOxbi6tlXdB0
@PeeksPeakHobbyHomestead
@PeeksPeakHobbyHomestead 2 жыл бұрын
Nice job on doing your own maintenance! Lots of good information in this one!
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
It seems like something always needs servicing, doesn't it? If only someone had a lift in their shop.....hmmmmm. 🤔🤣😆 Thanks for stopping by Lucas. B&D
@JustCaidsDayFarm
@JustCaidsDayFarm 2 жыл бұрын
It definitely saves money and time doing those things yourself. Nice job! I need to get better at doing my maintenance. I have to get my 400-hour done on my tractor. I'm already 20 hours over.
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
Machines are nice, but something always needs something! Thanks for watching. B&D
@jamesscroggins3486
@jamesscroggins3486 2 жыл бұрын
Nice job, did not look to complicated and saved you time and money.
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
👍 The biggest thing is not towing it to the dealer and then dealing with the trailer and the downtime. And yes, it was simple although the final drive plugs not coming out on the first attempt had me worried! B&D
@curtisduncan4005
@curtisduncan4005 10 ай бұрын
Brad, new to your channel. But enjoy watching and have found you to be very helpful. In fact just bought a Kx71-3 today with a lil over 100 hrs. So this video I'm glad I came across..Thanks partner
@PineyGroveHomestead
@PineyGroveHomestead 10 ай бұрын
We love our KX71...we have a whole playlist on what we do with it. Thanks for watching. kzfaq.info/sun/PLG5yS75HLzo0v6LnCFxPlQOxbi6tlXdB0
@Bellislawns
@Bellislawns 5 ай бұрын
I'd encourage you to get a torque wrench. You will not regret it, and you will need it now that you have that mini-x. I got one when I got my U17 for under 50 bucks. Use it to remove and tighten those drive-line hex bits. And yes, 90 degrees stop turn 4 times. You were correct. Thanks for the info. Came here for the hydro filter :)
@PineyGroveHomestead
@PineyGroveHomestead 5 ай бұрын
I do need a torque wrench!
@PaleHorseOutdoors
@PaleHorseOutdoors 2 жыл бұрын
Hey Brad, nice work getting the plugs out. Patience pays off for sure when working on your equipment. I have that same Dewalt. It's pretty decent for a battery powered tool.
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
I tried the 1/4" impact driver and they wouldn't come loose. The 1/2" drive is a boss though....I haven't put it on a lug nut yet that it wouldn't loosen. Bonus: I got more tools out of the deal! 🤣Take care. B&D.
@michaelmactavish4445
@michaelmactavish4445 2 жыл бұрын
@@PineyGroveHomestead thats the gear oil i use in my husqaverna snowblower gear box wich the kubota gear oil was cheaper
@michaelmactavish4445
@michaelmactavish4445 2 жыл бұрын
I have a kubota grease gun and kubota grease wich kubota is nice have a kubota grease gun wich comes with 2 free tubes of grease
@artk6177
@artk6177 8 ай бұрын
So, another channel did the final drive and rotated the drive so the other plug on the perimeter was down and being used as the drain hole. Then the other perimeter plug was the fill hole and the final one (more in the center) was the full indicator hole. IDK anything about this, but that dude didn't have any problem filling the drive, plus, you'd think they have 3 plugs for a reason. I'm a mechanical idiot so just a thought.
@PineyGroveHomestead
@PineyGroveHomestead 8 ай бұрын
I just followed the directions in the owners manual...maybe I read them wrong. It sure went in slow! Thanks for watching.
@salonecapitalllc2191
@salonecapitalllc2191 Жыл бұрын
Very helpful video bud
@PineyGroveHomestead
@PineyGroveHomestead Жыл бұрын
Thanks. I like that it all was pretty easy to get to as well!
@tylerb7795
@tylerb7795 Жыл бұрын
Thank you
@PineyGroveHomestead
@PineyGroveHomestead Жыл бұрын
thanks for watching
@HillsideAcres
@HillsideAcres 2 жыл бұрын
I’ve been in the market for a good mini, just missed out on a nice 161 that went for a good price but I was down south when it was posted, I also do all my maintaining my self.
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
Before I bought "Precious", I literally had my trailer loaded and cash in hand to buy one at a great deal 30 minutes away. Was waiting for a bad storm to pass through, and just as I was starting my truck, got a text -- "SOLD". So frustrating!!
@HillsideAcres
@HillsideAcres 2 жыл бұрын
@@PineyGroveHomestead that’s how it goes, I’m always buying and selling stuff, more buying than selling but to get the good deals you got to be on them instantly because they never last !
@Mil2Vet
@Mil2Vet 8 ай бұрын
Mil2Vet approved!
@PineyGroveHomestead
@PineyGroveHomestead 8 ай бұрын
Thanks for watching.
@troyr57
@troyr57 2 жыл бұрын
On my KX 033-4 I had to get a 24 inch breaker bar and sprayed the bolt. I also opened the top two plugs, fill from the top edge hole and wait for it to fill up watching the middle hole.
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
We were scared of breaking off the bolt. The vibrations of the impact wrench really helped. Hopefully the next time it comes out a little easier! Thanks for watching.
@jasvan4359
@jasvan4359 2 жыл бұрын
When I changed my gear lube for final drive I did it the same way I did it on my boat motor lower unit. Pull both plugs drain unit , insert a clear lube on end of bottle of oil cut tip small , (NOTE: buy about 12 to 18” clear tube that fits the hole of bottom plug)and insert in lower unit and squeeze until it comes out top hole then quickly inset bottom plug , you will loose a little bit of oil when inserting
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
Good idea! The fill hole on the final drive is a little challenging.
@jasvan4359
@jasvan4359 2 жыл бұрын
@@PineyGroveHomestead I enjoy your videos and your learning experiences keep them up
@jasvan4359
@jasvan4359 2 жыл бұрын
And yes the bottom hole is a challenge but it works
@antoniobravo6815
@antoniobravo6815 Жыл бұрын
I have a KX71-3 Super series and I can't find where to put the Fuel filter(RA211-51280) at
@PineyGroveHomestead
@PineyGroveHomestead Жыл бұрын
The spin on high pressure fuel filter, or the water separator? It only has 2 fuel filters.
@danchandler-lt8nl
@danchandler-lt8nl 3 ай бұрын
Do you have a part number for those filters please?
@robertd6925
@robertd6925 2 ай бұрын
Get a socket drive bit and an impact.
@PineyGroveHomestead
@PineyGroveHomestead 2 ай бұрын
That's what I used in the video
@KG1982UK
@KG1982UK 10 ай бұрын
Great video, ive just bought my first excavator, a kx61-3. Do you know why there are 2 oil filler points on the engine? Im just about to service mine and when i do the oild change i want to make sure ive done it right. Thanks Kiran
@PineyGroveHomestead
@PineyGroveHomestead 10 ай бұрын
Hmmmmm....I just made another video on changing the oil on this KX71 and we only have one engine oil fill point. And one hydraulic fill point. Our L3901 tractor is the same....one for the engine, one for the hydraulics. Your dealer can probably tell you! Thanks for watching. Here's our excavator videos: kzfaq.info/sun/PLG5yS75HLzo0v6LnCFxPlQOxbi6tlXdB0
@nixran
@nixran 8 ай бұрын
I know this is over a year old but the reason you had so much problems adding oil you were adding it in the wrong place. The top left plug is for fill and the top right is for you the check when it’s full.
@anthonyshaw7251
@anthonyshaw7251 Жыл бұрын
A little bit late to the party lol, but if you give the drain plugs a good hit with a hammer, you will be surprised how easy they come loose. This goes for bolts generally, hydraulic fittings etc.
@PineyGroveHomestead
@PineyGroveHomestead Жыл бұрын
Thanks....but I was too scared to try!!
@anthonyshaw7251
@anthonyshaw7251 Жыл бұрын
@@PineyGroveHomestead lol, couple of gentle ish taps with hammer is ok, impacting them out puts strain on the Allen key/bolt corners.
@MrClivelupo
@MrClivelupo 2 жыл бұрын
i will never spend 1 min. on my car to repair or do any maintenance. There are people outthere who have enough knowlege to do this, and i hate oil and grease etc.on my hands. I know it costs me, but i don´t care. As a brewmaster you need always clean hands and clean fingernails so this job must get outsourced 😂😂
@PineyGroveHomestead
@PineyGroveHomestead 2 жыл бұрын
I hear you!! Saving money is one factor, but the biggest factor is time....it's a two day evolution to get heavy equipment in for service and back home again. Plus the downtime while it's gone!! Thanks for watching. B&D
Kubota KX91 3 excavator Final drive & Hydraulic fluid change
23:29
Gate City Foundation Drainage
Рет қаралды 15 М.
HOW TO SERVICE A MINI EXCAVATOR!
15:17
Calamity Kim
Рет қаралды 21 М.
I CAN’T BELIEVE I LOST 😱
00:46
Topper Guild
Рет қаралды 104 МЛН
你们会选择哪一辆呢#short #angel #clown
00:20
Super Beauty team
Рет қаралды 36 МЛН
ОСКАР vs БАДАБУМЧИК БОЙ!  УВЕЗЛИ на СКОРОЙ!
13:45
Бадабумчик
Рет қаралды 4,3 МЛН
Вечный ДВИГАТЕЛЬ!⚙️ #shorts
00:27
Гараж 54
Рет қаралды 14 МЛН
The new Kubota KX 080 4 goes to work for the first time
21:33
Jeramy Reber Pure Dirt
Рет қаралды 14 М.
Micro Excavator Maintenance - Questions Answered
19:18
Our Life In Trees
Рет қаралды 11 М.
No one believes me but it really works! Incredible builder technique!
31:02
Populer WrldVideo
Рет қаралды 138 М.
Kubota Excavator Maintenance - Oil Fuel Air Hydraulic Filters Service
32:48
Sean Markee - SRM Contracting
Рет қаралды 44 М.
Recovering my tipped Kubota BX23s tractor
13:10
Nolan Klein
Рет қаралды 253 М.
Learn How to Change Your MINI EXCAVATOR Tracks in Minutes!
9:15
Mini Excavator Drive Unit Oil Change
8:57
DeHaven Family Farm
Рет қаралды 17 М.
Buying (and Fixing) My First Excavator.  Yanmar VIO-50
45:13
FarmCraft101
Рет қаралды 893 М.
Servis minibagra Kubota KX018-4
6:56
Kubota Slovakia
Рет қаралды 3,9 М.
Тот кто не коснется воды - получит приз
0:37
รถมีชีวิต #ตลกขำๆ
0:21
ขายขำ channel (มะพร้าวเงินล้าน)
Рет қаралды 12 МЛН
Рука застряла в заборе
0:27
RICARDO
Рет қаралды 1,5 МЛН
Лучшая краска для стен и потолков, которая не желтеет, не покроется грибком и не имеет запаха
0:22
БуСтройМаркет | Строительный склад-магазин СПб
Рет қаралды 4,3 МЛН
ОН МСТИТ ПРОДАВЦУ МОРОЖЕНОГО
0:32