Kubota l295 l295dt l245 l245dt tractor basic information and buyers guide

No video

Kubota l295 l295dt l245 l245dt tractor basic information and buyers guide

Рет қаралды 41,446

mikes random videos

Күн бұрын

best deal on goodyear air hose check this out amzn.to/3b5cJvy

Пікірлер: 30

@burtreynolds3143 6 жыл бұрын

I have a L245DT and I tore down the loader, after breaking one of the mount bolts, and painted each component. P.S. The Valspar tractor paint went pink on me too. Anyway, unless they made a larger loader an exact scaled up version then the L245DT runs the same loader. It is labeled L1730 and has a single control stick on the valve with a float function.

@mikesrandomvideos 5 жыл бұрын

thanks for the info not much out there on these.

@burtreynolds3143 5 жыл бұрын

@@mikesrandomvideos kzfaq.info/get/bejne/ppyYrNWEs9TUnYU.html p.s. That bit you are pointing to looks more like a differential lock. I think if you step on it you will notice that both back wheels turn together and you will have difficulty steering but it will get you out of a slippery mud patch. The 245DT has a diff lock there.

@TwisterNuts642 3 жыл бұрын

That pedal on your right side underneath the pto controls is a diff lock. At least it is on my l225dt. Incase you didnt know

@katzdad1962 Жыл бұрын

the little small round peddle on the right is a throttle on my L285

@josephjohnson1161 4 жыл бұрын

Great video. Very informative. Looking at purchasing one soon

@joelirwin9782 5 ай бұрын

nice video. looking at buying at L245DT. Seller states front bearing issue?? Haven't worked on one of these before, wondering if that's a big or expensive job for a DIYer?

@mikesrandomvideos 5 ай бұрын

see if the front pump flex shaft is rubbing on the radiator support if so. easy fix. just get some shock bushings and replace the bushings that hold up the radiator support. dont know of a front bearing only that. happens all the time on these L tractors.

@brettpettinger9200 4 ай бұрын

@@mikesrandomvideosWhat in the world is a front pump flex shaft? Sounds like a Chris Farley line asking to check the specs on the rotogirter. The posed question was not specific but a front wheel bearing is likely. I can't say as to the cost of the wheel bearing but it should be a fairly easy fix.

@brittlinton8764 Жыл бұрын

You can put a steering box from the 245 onto the l295 i been researching cause i bought a 1980 l295

@laurienesbitt5232 2 жыл бұрын

I've got a L295DT, 1985. It's a good tractor. Lately, I have a leak at the bottom of the cannister that holds the hydraulic oil filter cartridge. I cannot tighten the bolts any more than they already are. I'm wondering how to check the level of my hydraulic fluid (on this model, it is together in the same case as the transmission fluid). I have an old manual that says it has a hydraulic fluid "level plug" on the left side (opposite side from filter cannister), but I don't see it. The cap doesn't have a stick on it. How can I see how much hydraulic fluid I've got in there?

@BarbnGeneVideos 3 күн бұрын

I have a 1980 L285 and can't find where to check and fill the hydraulic fluid. Help!

@mikesrandomvideos 3 күн бұрын

THere is a video from a guy who has a l245 who does an transmission oil change. and he does shows how to check it. I cant remember but there is a set screw in the side of the case and you fill until it comes out there. Tractor fluid or Hydraulic oil from what I understand is OK. I used tractor fluid. Changed it and it was super sludgy. held a lot of fluid too like over 5 gallons. Took a couple days to drain it.

@dand33911 5 жыл бұрын

Cool old kubota.

@mikesrandomvideos 5 жыл бұрын

thanks I did a mini restoration and put videos up on that. rebuilt the motor. Ran it out of oil otherwise it would have lasted forever. That is one of my guys did that.

@douglasdunn6684 4 жыл бұрын

I bought a L245dt about 1 year ago and have had to replace the steering gearbox twice already. I am very conscience to only steer when the tractor is moving but the steering gearbox seems to be a weak link. I was told that the loader might be too heavy. Anyway, I thought that I might try and install some type of power steering. If anyone has any tips please let me know. Thanks

@mikesrandomvideos 2 жыл бұрын

I put a l245 steering box on mine. the original one is not available anymore. little short and a Knuckle buster but it works.

@lancekramer5844 7 жыл бұрын

I have a L295 and my bucket controls are the same

@mikesrandomvideos 5 жыл бұрын

oh that is good to know i wasnt sure on that

@bbrut3332 3 жыл бұрын

Mine are to sensitive also. And the shaft rods leak. Looking to get a rebuild kit for my LT 295.front end loader controller.

@mikesrandomvideos 2 жыл бұрын

@@bbrut3332 yea the cylinder kits are available at places like Burnell Hydraulics and Orings and things. you just take the Rod ir piston with you and they will match up what you have. cost about 50 to 70 each for the parts. Total no brainer to install them. Guys charge from 250 to 500 each to rebuild them on the bench. Best to DIY.

@mcleod22 6 жыл бұрын

is the pto still running if it engage and your depresse the clutch pedal all the way down? i think they have a single disk dry clutch im wondering if it could be a good snow blower or not

@mikesrandomvideos 6 жыл бұрын

rear pto is activated with clutch. there is one on the front of the engine that runs the loader. I think one for the front woud run a snow blower. the blower would need a shut off. check to see if the blower is available for the tractor just so you know.

@mcleod22 6 жыл бұрын

thanks for the reply, tractor data stated that is was a live pto and in the shop manual i see a dry clutch, so i was a bit confused, there is one cheap for sale in my city and i was thinking about a front reversible snow bucket and rear snow blower but without 2 stage clutch it would be a pain in the ass !

@comanchetexas 5 жыл бұрын

Where is the safety starter switch located?

@mikesrandomvideos 5 жыл бұрын

Look up my l295 cold start video. I show right where it is.

@comanchetexas 5 жыл бұрын

@@mikesrandomvideos Thank you for your prompt reply. I really didn't ask the correct question. I have a L295DT that looks just like yours. You are the most knowledgeable person that I have found on KZfaq. My electrical schematic shows a safety switch between the starter switch that you show in your video and the starter. When I engage the starter switch, all I get is one click. No more. If I disconnect the battery and try the start again, it will click one time again. Would you object to sending me your email so that I can ask you some questions about my problem?

@brittlinton8764 Жыл бұрын

@@mikesrandomvideos going to check tgat out i just bought a l295