Build a Drill Press Table for PBD 40 / DIY

Рет қаралды 43,228

3 ай бұрын

I enjoy using the drill press of the Bosch Company called PBD 40.
It is an attractive product with a circular handle.
The bottom plate was made of aluminum, so it looked pretty but it was a little uncomfortable.
So I upgraded the PBD 40.
The table was enlarged and other equipment could be installed.
If you use this drill press, I think it's something to consider at least once.
Recently, I continue to focus on upgrading the drill press.
In the next video, I'm planning to make a beautiful dust collection equipment using acrylic for this work.
Please keep an interested eye on how this product evolves.
Thank you.
#DIY #Bosch #DrillPress #Woodworking

Пікірлер: 46

@Kynosys_ 3 ай бұрын

I enjoy using the drill press of the Bosch Company called PBD 40. It is an attractive product with a circular handle. The bottom plate was made of aluminum, so it looked pretty but it was a little uncomfortable. So I upgraded the PBD 40. The table was enlarged and other equipment could be installed. If you use this drill press, I think it's something to consider at least once. Recently, I continue to focus on upgrading the drill press. In the next video, I'm planning to make a beautiful dust collection equipment using acrylic for this work. Please keep an interested eye on how this product evolves. Thank you.

@bradleytuckwell4881 3 ай бұрын

You’ve out done yourself on this one it’s a beautiful design I love the storage area for your replacement plates and those drawer pulls are great. I’m looking forward to part two

@efektmurowany 3 ай бұрын

Man, this is what i needed for my bosch 40 🎉🎉🎉❤❤❤

@VastCNC 3 ай бұрын

Really wish these drills were more common in the US

@user-xn1yg3ie9p 3 ай бұрын

드릴링 테이블은 주물로 제작한다는 고정관념을 갖는 1인데요 훌륭합니다. 우드로 만든 테이블이 수납함 등 다재다능한 역할을 하는 것에 놀랍습니다. 항상 응원합니다~

@Kynosys_ 3 ай бұрын

드릴프레스 작업테이블이 너무 고정관념에 사로잡힌듯 모양들이 똑같습니다. 동그란 테이블에 위아래로 움직이고, 기둥에 조여서 고정하는 형태지요. 형님도 발명인이니 잘 아시지만, 저희는 그런 고정관념 바꾸는걸 워낙 좋아하잖아요^^ 성원에 감사드립니다.

@PJ1R 3 ай бұрын

Brilliant, as ever very inspiring, especially now as I am about to start fitting out my newly extended workshop

@Kynosys_ 3 ай бұрын

It is a very happy experience to hear that I have given someone a little inspiration and hint. Thank you very much. I will support and encourage you to create a wonderful workshop.

@jelias9247 3 ай бұрын

Wow! It really looks great!!! Very nice job! Can’t wait to see the next video!

@seyoung_nusu 3 ай бұрын

멋진 작품이네요... 따라서 한번 만들어 보고 싶네요... 항상 잘 보고 있습니다... 좋은 영상 감사합니다.

@stephenzello3519 3 ай бұрын

Very nice. I wish they sold the PBD 40 in the USA.

@Lucagricole 3 ай бұрын

Unbelievable 🤩

@jimrosson6702 3 ай бұрын

Wow absolutely amazing as always.great job amazing idea. Can’t wait to see what you do next.

@Kynosys_ 3 ай бұрын

The next video is also about a new type of dust collection method, so I think you'll find it interesting. Thank you for your continued support.

@arthurheijmen9517 3 ай бұрын

Nice work.

@Kynosys_ 3 ай бұрын

Thanks for your interest!!!

@PedroAlves-ee8vk 3 ай бұрын

Hello, very good 😮😮, salutations de Suisse 🇨🇭, à bientôt 😊😊

@user-ce7on9ts9t 3 ай бұрын

Très intéressant surtout que j'ai la même perceuse à colonne Bosch , je vais m'en inspirer .

@Kynosys_ 3 ай бұрын

Nous pouvons ressentir un sentiment de parenté et de camaraderie simplement en ayant la même machine. C'est notre devoir et notre plaisir de partager comment mettre à niveau ces machines. merci We can feel a sense of kinship and fellowship just by having the same machine. It's our duty and pleasure to share how to upgrade those machines. thank you

@onkelmaane 3 ай бұрын

Great idea, would love to build this for my pbd40, where do you buy the Nice drawerhandels that pop out, they are really cool👏🏻👍🏻

@jameslovering9158 Ай бұрын

If I only had the room :-) my drill is stored under the bench when not in use due to constraints.

@Kynosys_ Ай бұрын

The question is, do you want it? Or maybe not. Seeing that you're interested in my videos, I think you'll want to create your own workshop. I guarantee that if you continue to pay attention, one day you will have a much better and more beautiful workshop than mine. I will wholeheartedly support you. thank you!

@patbird9694 3 ай бұрын

You sure think outside the box. Yes. I will be happy to borrow your idea once again. Good job designing it sir

@Kynosys_ 3 ай бұрын

If my work can be a small hint for your work, I would be very happy. thank you!

@crayonbleu844 3 ай бұрын

Bravo

@NeNNoPromo 4 күн бұрын

Nice one. How do you have make you automatic opening and closing drawer (at 13:41)

@Sugarfoot108 4 күн бұрын

What is the chamfer tool? What is to bit you used to ream the holes?

@GiancarloFiorelli 3 ай бұрын

Eccellente, com'è il tuo solito. CHAPEAU

@TTAJ 3 ай бұрын

Like168 영상 잘 봤습니다!! 또 오겠습니다!!

@Kynosys_ 3 ай бұрын

좋은말씀 감사드립니다.

@DTAWorx 3 ай бұрын

Very nice indeed. Do you have plans available for this design.

@Kynosys_ 3 ай бұрын

I usually work with rough sketches. However, there are many people who want drawings, so I am planning to draw drawings through reverse engineering when I have time. Please refer to the channel. thank you!

@erikcramer 3 ай бұрын

I have the same drill, I wish it had a reverse for tapping, and I've never used that clamp that comes with it 😂

@Kynosys_ 3 ай бұрын

I am also very disappointed that there is no tapping function. And, if you try the clamp, you will be very satisfied. This is a well-made part. thank you!

@erikcramer 3 ай бұрын

@@Kynosys_ perhaps a nice video making a reverse option for the motor.

@Kynosys_ 3 ай бұрын

Very good suggestion. I want to tear off the drill body right now. Reverse rotation of the motor to install the tapping function. Let's research it. thank you!

@erikcramer 3 ай бұрын

@@Kynosys_ hope it's just reversing polarity

@wthorwirth 3 ай бұрын

Your router table needs an dust extraction! (Hole or table end collector)

@Kynosys_ 3 ай бұрын

You are right. Next time, I am planning a router dust collection system. The space where the router table is currently located is entirely ventilated, so I'm still putting it off. thank you!

@TheBenibriliant 3 ай бұрын

👏🏻👏🏻👏🏻👍🏻👍🏻👍🏻✊🏻✊🏻✊🏻

@Kynosys_ 3 ай бұрын

Thanks for your praise!🫡🫡🫡

@PeterNetped 3 ай бұрын

@Sparky_Mark 3 ай бұрын

Keep up the videos man, you’re an inspiration for my channel. 🥲

@Kynosys_ 3 ай бұрын

Thank you for your kind words. I will also enjoy your works a lot.

@b2yes 3 ай бұрын

How to remove the wooden chips provided during drilling processes from the top panel？

@Kynosys_ 3 ай бұрын

The next video is about adding a new type of dust collection equipment. To blow out the wood chips, a long, single-shaped groove was made on the back. thank you!