Kyosho Inferno MP10 1/8 Nitro Buggy - Comparison with MP9 TKI4

Kyosho Inferno MP10 1/8 Nitro Buggy - Comparison with MP9 TKI4 - Best Nitro Buggy

Рет қаралды 15,354

Күн бұрын

Affiliate links:
Kyosho Inferno MP10 Readyset: alnk.to/a42izJY
Kyosho Inferno MP9 TKI4: alnk.to/28QW3Ia
Protek 1800mAh LiFe pack: bit.ly/3Q18mWc
First look at the Kyosho MP10 Readyset 1/8 Nitro Buggy and a side-by-side comparison with the MP9 TKI4 Readyset.
#kyosho

Пікірлер: 45

@Ls3Atomicvette 7 ай бұрын

Great review! Love the Kyosho nitros

@mitsuman5555 7 ай бұрын

You are the best-informed guy to do this comparison. Happy to see it!

@RazorRC 7 ай бұрын

thanks

@evil14life 7 ай бұрын

You'd think by now Kyosho would get with modern times and ditch those damn phillips head screws. They make maintenance way more tedious than it needs to be.

@RazorRC 7 ай бұрын

riiiight?

@mini-z_me 6 ай бұрын

They are more likely to be JIS screws, which are relatively easily stripped by Phillips Head screwdrivers. A JIS screwdriver works fine on JIS screws. A Phillips Head screwdriver doesn't fit correctly in a JIS screw head, and risks stripping the screw head.

@RazorRC 6 ай бұрын

@@mini-z_me true, having built a few Tamiya kits with a JIS screwdriver, still not a fan of them.

@evil14life 6 ай бұрын

@@mini-z_me I thought the same and use my JIS drivers on them for most of my kyosho builds. Most JIS screws have a little dimple in the head of the screw to identify it, but the kyosho screws do not have them like every other JIS screw I’ve come across. It also didn’t seem to matter if I used the JIS drivers or Phillips drivers on them, I wasn’t able to get a bite on them very well at all, haven’t stripped any heads yet but have come close. Hex is definitely the way to go here.

@magicalframe9441 Ай бұрын

I would definitely buy a better hardware set with it.

@kyronrc 7 ай бұрын

Love the nitro content! You should really try a racing kit next…

@craigmac1516 6 ай бұрын

great video got me wanting the new mp 10... love my mp 9...

@TruggyDriver69 7 ай бұрын

Great comparison vid.

@fredrik-cm4kl 2 ай бұрын

Hi m8, i must say your videos are great! I have a question, i have plans to change the reciver battery, witch reciver packs fit, or what do you recommend? Keep up the great work with this videos i like em so much, i have a MP10 to now 😊 take care and have a great day.

@OhNoItsPaul 7 ай бұрын

Probably the best rtr buggy out there. But I will never but a kit that uses phillips hardware.

@curtisaustin4535 7 ай бұрын

Great job 👍

@LawrenceTimme 7 ай бұрын

Another solid option for the nitrogang

@kiethpederson7558 4 ай бұрын

Nice video I was wondering what the difference between the MP nine and MP 10 were

@electricnitrorc 7 ай бұрын

Wonder if you will notice some improvements. Maybe if you drive one after the other. Probably better diffs, ball bearings and pipe. I am looking forward to your running experience with the mp10. I think for bashing I stay with the Neo.

@BASSstarlet 7 ай бұрын

For priming i prefer using a syringe (without the needle!)

@curtisaustin4535 7 ай бұрын

I like to take the line of the pipe and blow on it works every time

@malsmith2012 7 ай бұрын

No rear mud/rock guards on the 10 mate?

@yellowfinendurance Ай бұрын

what glow plug comes in kit? what replacement do you recomend

@SuperFastRc 7 ай бұрын

So cool! Any chance you will clubrace this one and report back?

@RazorRC 7 ай бұрын

as soon as there is a track closer than 4 hours away... 😩

@keithphillips1234 2 ай бұрын

Not one to usually order older stuff, but Amazon hiked up the price on the mp10 to $685 this evening, I was like oh heck no. So wound up getting the mp9 nitro for $499. I’m sure I’ll be happy with it.

@mzondi1970 7 ай бұрын

Would love to have a nitro but I haven't tuned a nitro since the mid-80s and I think it was a offna Pirate. I don't think these old eyes can mess with those small Jets and needles anymore

@RustybeltRC 7 ай бұрын

I have the Mp9 RTR, and I am transforming it into a racing kit.

@RazorRC 7 ай бұрын

nice, I'd recommend the kit chassis and front shock tower

@andy19seventysix70 7 ай бұрын

Going to retire my mp9 tki3 when these become available in the UK

@Harvz78 5 ай бұрын

Can the shell interchange to both?

@JohnBurrell-73 7 ай бұрын

👍

@DavidVidaurri 7 ай бұрын

❤❤❤❤ Can you please enter a race with it. Whee did you buy it and how much

@RazorRC 7 ай бұрын

I bought it at Amain, link in the description

@user-ub4yu3vy7g 7 ай бұрын

❤❤❤

@langer532 2 ай бұрын

Is the body orange or red MP10?

@RazorRC 2 ай бұрын

Kyosho calls it red, but it's more of a reddish-orange to me.

@redblue40rc33 6 ай бұрын

I got a brand new protek nitro starter box and protek 4s lipo if anybody wants it..used very little..converted my nitro to brushless

@jaciel85 6 ай бұрын

Where you located?

@redblue40rc33 2 ай бұрын

@@jaciel85Arkansas, sorry for late reply

@redblue40rc33 2 ай бұрын

@@jaciel85Arkansas

@RickyD1968 4 ай бұрын

It looks like the MP10 is a cheaper version ???

@RazorRC 4 ай бұрын

of what?

@RickyD1968 4 ай бұрын

@@RazorRCMP9

@martinbielby334 Күн бұрын

Erm have you run it in? Oh you did lol

@curtisaustin4535 7 ай бұрын

Nitros rule electric drool😂😢