Thank u sir, I've been Fighting with this 4s batteries for 2 days, and ur vid and 4s diagram have saved my sanity. U rock

You have found a lot of brains - I used to go to the same recipe for six months but no one had that much knowledge Muginambo was happy -

now this is a channel what deserves subscription! No bs hello youtube bla bla bla, just pure explanations, and DIY. got my sub man! Thanks for the vids!

The video is good but female power connectors should be used on battery side to avoid any chance of short circuit and also one thing is lacking that connections to the BMS should be in video for better understanding.

The best tutorial ever in making diy batteries. Thanks you

Great video, like it!👍 Thank you!

Thank you for sharing bro... Keep it up

I make the 3s battery pack in according with you video. Thank you my friend.😃 👏👏👏👏👏👏👏

Nice work on this video! Succinct, pleasant audio, and very informative! You’ve earned yaself a sub!!

That is amazing! Gee wee!

Good Job!

literally exactly what i needed

Can a poor spotweld cause a drone to brown out in flight? I got my nickel strips to stick to the battery cells, but I didn't see any sparks. I powered my spot welder circuit board from a jump box that's used for jump starting cars. The Molicel 18650 2800mah 35a discharge batteries should be plenty to power my 7 inch drone for a cruise flight.

What is the size of the heat shrinking tube you used there for the 3S pack please ?

Very good !

Thank you for sharing, good for your labor. Which (Volt and Ampere) adapter can we charge the serial group 18650 batteries with 4S and 5S BMS? For 4S to 16.8V - 5S to 21.0V, the min. and max. If I can learn how many Volt and Ampere values it should be, I can choose from the adapters I have.

So the same batteries I use for my vape and my laptop also power my RC car... badass 18650's run the world.

hello I would like to make a 12 v battery with 3 x 4.10 v batteries. - do they have to be mounted in series? - Which BMS do you recommend? thank you for your videos.

very very thanks for this video

Nice vid. Helpful!

très bien c'est excellent

What sockets do the T connectors plug in to? Do BMS boards come with the receiving connector to one shown?

Never put the male end of the connector to the battery. Always female end. Otherwise there is risk of short circuit and fire. VERY BASIC

Thanks!

Creative video, thanks :)

The best quality of batteries that this is bought

Nice video. Keep working. What is the heatgun you using?

Great vid

Nice video!

Excellent.

Thank you this is exactly what I needed to see.

I would like to make a 3S1P using 3 18650 batteries. The batteries are protected, do I need a PCB in this case?

Very nice 〰〰〰👍

C’est magnifique 👍

We can save a lot from these! the only cost a lot on this project aside from the batteries is the arc welder.

hy i've got some sony murata 3100 mah 35A curent cells to make a 6s2p pack , my concern i about how many nichel strips do i need to get 35A per series pack (35 per pack will lead to 70A discharge total 2p config), i have some 0.2x8 mm pure nichel strip that i've heard and tried that it doesn't like to stack multiple layers, and some nichel plated steel that weld better more buttery. Are 4 layers enough ? should i alter the strips to have steel nichel steel nichel ... also i think it is better to connect the cells in parallel using the strips, at each joint of 2 parallel cells instead of just at the end like if they were 2 separate packs, it should help with balance, but i ask just to be sure. Also even if i stack enough strips on top of each other, all of them will interact with the cell using the tiny spot welds of the first strip that conects all of them to the battery trough it, are they gonna be enough, those spot welds ?

what's the difference between Enhance and Balance version for bms ? thank you

GOOD ONE

El conector de la bateria es el otro ANIMAL!!!!

Nice 👌👌

female connector should be used to avoid short circuit between positive and negative

any alternatives for nickel strip and insulater ring. because I have all the things except both of them please help?

appreciate the video but you NEVER use the male end of a connector on a source, EVER

Sạc đó anh mua ở đâu vậy ạ

THANK....THANK.......!!!

I need a spot welder in my life right now

Do you have link where you buy your spot weld ? Thanks sir

Which jumper is better to use for assembling Molicell 21700 42A - 6S What thickness and width of the steel tape is suitable for peak loads of long-range quadcopters. I want to use metal tape and welding instead of soldering

You make the main port exposed it can short anytime

Nice install bro new frnd her

Nice

excellent

The t-connector is the wrong one, May cause a short circuit because the poles are exposed. Regards

Can 3s may be usefully be used in drones?

I been looking for a lipo cell holder like THAT! Where can we find/buy them? Thank YOU!

Good job🇮🇳👍👍 Kuki

needed to c this

Hi Lahis , great video , but now they have more advance BMS board in the market , is the 4cell suitable to use with the 40A board , due i need to change my Ni Cd battery to Li on for my drill, your advice please .. tks

Hi! Guys a question! what would be the proper way to charge these?

Which charger used for 2S

O cara simplesmente Juntou várias celulas, sem Controladoras, sem placas de proteção tsctsctsc

i can chargued with 13.5 V at the bms 3s? how many voltege used?

what is the purpose of those weird red connectors? are they necessary or can we just use the cells through the balance connector?

Do you know where buy 18650 Batteries for drone racers?

bravo

🔥👍

Exelente q berraquera

Can you use a 6S cable for a 3-battery pacl or a 4-battery pack please?

Whats the switch for?

بعض الاحيان نحتاج زوم. لمعرفة الربط او الفهم شكرا يا مبدع

Good morning Bhai

question, when I charge the power bank, can I charger it using a regular USB wall charger? output 5v 1 amp or 5v 2.1 amp? please let me know.

Bro make a door lock hole mortise kit

建議 電池輸出端子使用母接頭，主要原因是電池輸出端有常態性直流電輸出，因此使用母接頭可避免與金屬碰觸而產生短路(火花)。

Where to purchase the orange battery holder?

haii how to use 3s with 3 pin cable for remote control car??

Nice install the connector 😂

10.03.21 Thanks!!

I built a desk fan with 5volt motor using 2 18650 batteries in parallel, one charge lasts 17 hours continuos.

Bro, make a professional BMS using TP4056 module,,

Super 👌 👌 pokazane pozdrawiam

Excelente video . Dónde puedo conseguir el cargador bro

hola que tal ... para poder alimentar un autoestéreo de 12 v pero no se de cuantos amperes, trae un fusible de 10 amp como protección, podrías instruirme con un diagrama y todo lo demás como una bms y para que cargue etc. de antemano gracias

Sir please give the link of your cutting mat

Can the same connections be made for Parallel?

Did you also made simple spot welders with that male T plugs?.. Lol.

Good I need your advise Can you recommend this spot welder In local electronics market Sunkko 709A with 18k no warranty available I just need to start battery making small business in home What is your suggestion Thanks

Bro make a ripsaw tank

Hi Why you connected the connector? What's the reason?

Thank you, dear people 🙏💕

wow

3s how many amps does it have ???

Life can be tough at times.

Y si la de 2 sueldas lo necesito para un taladro de 7.2 volts ? ( porque veo que lleva un BMS

Why does it bring connection break in imax b6???????

What about discharge protection?

What is the use of balance cable connection

tès bien

Top

What's their volts, 2s, 3s and 4s?