Land Rover 4.6L Bosch Full Engine Rebuild (Discovery 2)

Рет қаралды 18,239

3 жыл бұрын

In this video we rebuild a Land Rover Discovery 2 engine, specifically the 4.6L Bosch. We had to pull the engine due to a oil pump failure that destroyed all the bearings. We show all the steps in this video from the bottom end with pistons and bearings as well as top end with the heads and everything else. We also throw some custom bumpers on. Enjoy the video, if you have any questions or comments feel free to reach out! Vive Mas! More content is available on instagram via @xplormor_offroad and @errrry_outdoor

Пікірлер: 56

@ericgarner8050 3 жыл бұрын

Awesome video Jon, impressive stuff you guys!

@EverydayOutdoor 3 жыл бұрын

Thanks so much man! I really appreciate it

@coreyking5135 10 ай бұрын

Thank you very much for your video, very clean work!

@EverydayOutdoor 3 ай бұрын

Thank you brother!

@JustRovingAround_Disco 5 ай бұрын

Fantastic work mate, and video is really well put together. I enjoyed. I sorta of have the same rebuild to do on 2 of my 3 Discos. It's gonna be fun.

@EverydayOutdoor 3 ай бұрын

Thanks brother! Good luck on your rebuilds, fingers crossed it goes smoothly

@jonwelk2767 3 жыл бұрын

Fire video as always homies!

@EverydayOutdoor 3 жыл бұрын

Thanks fam!

@keeganhunt8560 3 жыл бұрын

This is super sick bro, love this video!

@EverydayOutdoor 3 жыл бұрын

Thanks brother! I appreciate you watching

@tbrinkley112 Жыл бұрын

You make it look soo easy. And Clean, lol.

@xtremeist9 3 жыл бұрын

That dang engine, I have heard many things about those 4.6's and not many of them have been good haha. Good video guys!

@EverydayOutdoor 3 жыл бұрын

They are known for some reliability issues thats for sure. Thanks for watching

@kennyh5083 3 ай бұрын

I need to contact you! concerning information about Rover alum V8 engines and a possible rebuild from you guys. and I need some expertise advice too! Where are you located?@@EverydayOutdoor

@theredneckpirate5792 2 жыл бұрын

Big hello from Northern Ireland dude….. I have this very engine in my V8 rover 👌🏼 nice work

@EverydayOutdoor 2 жыл бұрын

Hey big hello right back at ya from the South Eastern US. Thank you for the kind words and watching!

@MrArmandoPhotography 9 ай бұрын

Great 👍 video bro. Great job! Wish would sprained all details So I can fix mine. Thx

@danielmebane6639 3 жыл бұрын

Another banger, did not realize you guys did land rovers also thought only toyota stuff. 10/10 great video!

@EverydayOutdoor 3 жыл бұрын

We do a little bit of everything! Thanks for watching brother

@kennyh5083 3 ай бұрын

I need to contact you! concerning information about Rover alum V8 engines and a possible rebuild from you guys. and I need some expertise advice too! Where are you located?@@EverydayOutdoor

@EverydayOutdoor 3 ай бұрын

@@kennyh5083 We are in NC what issues are you having? Ill try my best to help

@JustRovingAround_Disco 2 ай бұрын

I just noticed there's an E38 in the background. So cool.. 740 or 750?

@billykhunkhun1997 Жыл бұрын

Great video!!! I just pulled the engine out of my wife’s 2001 the bell housing bolts sucked and I had the heads off, how did you get them torqued with the engine fully built?!?!?!?

@davidholdren8315 2 жыл бұрын

03 v8s had a flaw with dowl pins .oil pump will fail again .check it out

@TbsDltn 2 жыл бұрын

any stroker kits available for the rover 4.6 litre v8 in the states?

@adrianrivera9404 Жыл бұрын

Mine has the same problem yours had can you come and do what you did to mine in Grand Junction, CO.

@user-cy1zr2oi6f Жыл бұрын

are engine cylinder sleeves replaced?

@Bulletstop75 2 жыл бұрын

NIce! Did you pin the liners?

@EverydayOutdoor 2 жыл бұрын

We did eventually haha

@EverydayOutdoor 3 жыл бұрын

Had to re-upload due to some technical issues

@Triumph67825 2 жыл бұрын

Where are you guys located? I have a 2004 Disco 2 and need the same thing done. Can you help a brotha out?

@rupertomontalvo285 2 жыл бұрын

Great job guys. I have a 2000 discovery 2 looking to rebuilt the engine. I need guidance with this project. Was wondering do you have a contact number where you can reached ?

@guzulukonyi9316 6 ай бұрын

Can this engine work eith Defender 110 300 tdi

@davelocock Жыл бұрын

How much you spend on parts ?

@landiesgentlemen3902 11 ай бұрын

Nice job other than this engine takes Dex-cool antifreeze.

@tonye4176 2 жыл бұрын

Rtv sealant on the oil pans gaskets and valley pan 😬

@EverydayOutdoor 2 жыл бұрын

Gotta make sure shes sealed up. These things love to leak

@tonye4176 2 жыл бұрын

Newer Valley pan and later oil pan gaskets are specifically designed not to take rtv sealant.

@ThePaytonstone 3 жыл бұрын

Can you update on motor in the future would love to see how it is holding up after a few thousand miles

@EverydayOutdoor 3 жыл бұрын

Yeah we showed the engine after 10K miles in the video actually around 7:40

@mackenziehaines1976 2 жыл бұрын

Is the audio just rough or is the engine sounding rough?

@EverydayOutdoor 2 жыл бұрын

It sounded a little rough in the beginning. We ended up pulling it back out and going through it again

@metalwaxdotcom 2 жыл бұрын

@@EverydayOutdoor great Video guys, I'm doing the same to my 04 4.6 same problems bearings burned up # 4 cam bearing walked into the lifter oil pump gear was broken. Im curious what made you pull the motor again? what did you find wrong? Thanks >

@victorarias2365 2 жыл бұрын

Uhh you got the unedited version. I need a reference and moral support lol

@EverydayOutdoor 2 жыл бұрын

its like 4 hours long but yeah I gotchu haha

@Triumph67825 2 жыл бұрын

@@EverydayOutdoor Would love it as well. Maybe I'll give it a shot with my 2004.

@TwistedOwen 2 жыл бұрын

How much did the rebuild cost with machine work?

@EverydayOutdoor 2 жыл бұрын

Without double checking I believe it was around 650$ for the rebuild kit and the machine work and then an additional 350$ or so to get the other crank ready to go. So about 1K total plus all the little stuff like oil and beer haha.

@Well.BoughtPhotos 2 жыл бұрын

@@EverydayOutdoor where did you guys get the rebuild kit from?

@EverydayOutdoor 2 жыл бұрын

@@Well.BoughtPhotos Thats a good question , let me see if i can find a link to it.

@Triumph67825 2 жыл бұрын

@@EverydayOutdoor Did you ever find the link?

@johnmay6442 2 жыл бұрын

Would you like to rebuild mine for me please lol it’s knocking like somebody is trying to bust out of the engine!

@EverydayOutdoor 2 жыл бұрын

Haha thats a common problem with these! Where you located?

@johnmay6442 2 жыл бұрын

@@EverydayOutdoor Somerset Ky but I’ll drive it out to you! Just got the M S transmission fixed by replacing the XYZ switch. Also went ahead and replaced the cam shaft sensor as well.

@landiesgentlemen3902 11 ай бұрын

It is likely a cylinder sleeve starting to slip up and down. You need a reman block. They pull the cylinder liners, and machine a groove around the top of the cylinder, then replace liners with a shoulder to keep the liners from dropping. It was a flaw in the original engine design.