Less than 7 min...using the Brilliance laser paint and it works just as well as the CerMark paint at way less the price!
Пікірлер: 45
@SheenaFallenRox Жыл бұрын
Thank you so much
@lazerking1701 Жыл бұрын
You are very welcome
@Leveluptac3 жыл бұрын
great video. I think this is like the only video of the Beamo engraving on metal. Have you tried anodized Alum?
@lazerking17013 жыл бұрын
Yes many times and did an awesome job as far as quality.
@wilmercb3 жыл бұрын
Deciding btw Muse, Beamo or Beambox Pro ...how you like the beamo so far and what's the warranty on the Flux laser cutter? Thanks.
@imp-rosewhite54343 жыл бұрын
Give him a call! His customer service is top notch!
@saijapitkanen12463 жыл бұрын
Is the magic really in the spray? We have used permanent markers and still there is nothing visible in metal with any settings. Flux customer service saw the photos (where really there was nothing visible in a knife etc) and said the Beamo works just as it should!? We are really frustrated with this. I would have ordered this Brilliance but only the shipping from USA was 59dollars.. Too much if it's not working and even if it is. Is there any other product you would recommend to try with?
@saijapitkanen12463 жыл бұрын
We have model 30 and the hybrid diode
@lazerking17013 жыл бұрын
The product you need is CerMark spray....the best for any laser engraving of metal.....I even did a video on this channel using CerMark.
@priyaestrada91193 жыл бұрын
I work with aluminum & a metal called nugold which is copper & zinc. Would this work on those metals ?
@lazerking17013 жыл бұрын
Tho I never worked with those specific metals I still dont see why not. Testing it would give you an answer.
@geton27502 жыл бұрын
Lazer engraving near me
@BananaMovies20003 жыл бұрын
Did you use the hybrid diode laser addon for this or the normal laser?
@lazerking17013 жыл бұрын
used a beamo 30w (co2)
@tdiaz7203 жыл бұрын
nice job, do you have to use the spray in order to engrave
@lazerking17013 жыл бұрын
If it’s plain stainless steel with no coding then yes you have to use a spray
@BananaMovies20003 жыл бұрын
What happened to the zippo, did that not work?
@lazerking17013 жыл бұрын
It worked fine. I just didn’t post it
@wandrefeliciodesouza3 жыл бұрын
Please, this machine engraves in gold?
@lazerking17013 жыл бұрын
No...you need a diode laser
@wesleyhampton52582 жыл бұрын
What settings did you use on the Beamo?
@lazerking17012 жыл бұрын
I used the metal settings in the presets and raise the power by five points
@polar_engineering3 жыл бұрын
Which model Beamo is this? 30 or 50W?
@lazerking17013 жыл бұрын
30
@Mitzycat9723 жыл бұрын
50W is the Beambox Pro
@fancymccoy89603 жыл бұрын
Hello I have everything at home to complete a project like this. What settings did you use
@locesta753 жыл бұрын
I tried 30 on power and 200 on speed. It came off, not completely, so now I'm trying 35 power and 100 speed. Stainless flask. I have the 30w Beamo. I'll let you know how the 2nd set of setting go.
@locesta753 жыл бұрын
@@brilliancelaserinks6292 I can't go 100% with this laser but the 35 150 did work. I made sure to clean the flask with dawn first and scrub it a bit. It came out awesome! Thanks for the reply!
@stretchthe1st3 жыл бұрын
What power and speed settings did you use? I have tried numerous settings with no luck.
@lazerking17013 жыл бұрын
In the beamo software we have a preset for metal already set...
@fashionjewelryforeveryone3 жыл бұрын
@@lazerking1701 I tried the default Metal preset it didn't work. Would it be possible for making a video to show how you coat the metal with the spray and also the settings so it will make our life easier, please.
@lazerking17013 жыл бұрын
@@fashionjewelryforeveryone If you look at my other videos I did a steel tumbler using CerMark laser spray, thats all you need...spray, engrave, wash off after engraving is done.
@fashionjewelryforeveryone3 жыл бұрын
@@lazerking1701 uhhh ... I tried Laserbond 100 spray with my Beamo 30W with Metal Preset ... didn't work. Should I try with CerMark or brilliance laser inks as shown in this video. Need to engrave on thin Stainless charms used to engrave charms/dog tags for jewelry
@1dudethat683 жыл бұрын
@@fashionjewelryforeveryone did you every get it to work? I just tried as well with the preset setting and it washed right off. I am going to amp up the power and kill the speed.
@polar_engineering3 жыл бұрын
Have you tried engraving/etching anodized aluminum parts with that machine?
@jamesrobert74053 жыл бұрын
It is better to use fiber laser. facebook.com/groups/4105345129538639/ facebook.com/groups/440091022989424/
@polar_engineering3 жыл бұрын
@@jamesrobert7405 I understand that, but there is a significant price difference between the two.