Laser Engraving Glass: Tips and Tricks + Laser Engraving On Full Bottles

Рет қаралды 7,672

Күн бұрын

In this episode on Laser Engraving 911 we will talk about laser engraving glass with a Co2 laser and the science behind it, Ill share my tips and tricks on how I engraving all kinds of glass and even show you an actual job from beginning to completion engraving on a full bottle of whiskey. Laser Engraving glass is very profitable for your laser engraving business, and knowing how to do it right is the first step! ✅"Leave a Comment On This Video" To Be entered to win a FREE Arkfeld UV FlashLight!" In Two Weeks I will select a 1 luck winner and notify you if you WON! LINKS BELOW ON PRODUCTS USED IN THIS VIDEO + OLIGHT Link!
✔ TIME STAMP
00:00 Introduction To Laser Engraving On Glass
00:44 Factors That Go Into Getting A Good Engraving On Glass
01:16 Looking At Engraved Glass Up Close ( With A Micro Scope)
03:23 Talking About How Different Logos Produce Excessive Heat On Glass
05:56 How To Reduce Heat Stress On Glass When Laser Engraving
07:46 Watch Me Work! Laser Engraving A Full Bottle Of Whiskey (The Expensive Stuff)
07:59 Using Talc Powder To See Your Red Laser On Reflective Surfaces. (HOT TIP)
GET THIS! OLIGHT ARKFELD UV and WHITE LIGHT FLASHLIGHT
Arkfeld UV+ White Light Flashlight shrsl.com/44yiz
"Leave a Comment On This Video" To Be entered to win a FREE Arkfeld UV Flash Light!" In Two Weeks I will select a 1 luck winner and notify you if you WON!
_________________________________________________________________________
💕AMAZON LINKS (affiliate link to help support my channel)
✅Digital Microscope: amzn.to/3XBF5Wx
✅Talc Powder: amzn.to/3rfOXck
✅Powder Puff Applicator: amzn.to/3XHrfSD
_________________________________________________________________________
15% OFF YOUR ROWMARK ORDER! use code "9PSMLE9" at
www.jpplus.com/rowmark-laserm...
Honestly, this code is good for anything at Johnson Plastics Plus 🤣
They have some great stuff for engraving blanks too!
Some of My Favorite Go To! Rowmark Products
✅Laser Max Acrylic (Two Ply) With 3M Backing
www.jpplus.com/rowmark-laserm...
🚨Green Glass Cast Acrylic:
www.jpplus.com/glass-green-ce...
❤Outdoor Acrylic (Two Ply) Metal Graph Plus!
www.jpplus.com/rowmark-metalg...
🚨Rowmark Swatch Book (MUST HAVE)
www.jpplus.com/rowmark-comple...
✅Rowmark Glitter Acrylic!
www.jpplus.com/rowmark-colorh...
_______________________________________________________________________
My Blog Site: www.laserengraving911.com best way to get a hold of me.
✅Looking for 1 on 1 Private Laser Engraving Consultation With Yours Truly?
www.sonomalaserengraving.com/...
🍩www.buymeacoffee.com/laser911
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
#engravingglass #laserengravingbusiness #engravingwhiskeybottle
#howtolaserengrave

Пікірлер: 42

@mitchelk.3682 Сағат бұрын

Love your attention to detail amazing explanation

@willynilly4651 Жыл бұрын

Great tips, always learning. Love it

@xplayer360 Жыл бұрын

Thanks for your golden tips ❤

@danaweiss9844 Жыл бұрын

Great video! Love to see your content!

@LaserEngraving911 Жыл бұрын

Thanks Dana!

@jasonmccasland978 Жыл бұрын

Enjoy your videos, especially since I run an Epilog as well. Your previous one about the powder coated mugs was helpful. I would love to see how you deal with the parallax effect on the the glasses with a taper.

@garrettdrilling1371 Жыл бұрын

Great tips! Will definitely be using these.

@LaserEngraving911 Жыл бұрын

Fantastic!

@johnnyspropshop Жыл бұрын

Thanks for the tips, had not thought or seen Talc used.

@LaserEngraving911 Жыл бұрын

The Talc is great, works with all reflective surfaces , transparent and dark colored object, and works with fiber laser engraving too! Do it!

@namegoeshere6923 Жыл бұрын

Great video again Michael!

@LaserEngraving911 Жыл бұрын

Your very welcome!

@skylarkoog09 Жыл бұрын

the talk for positioning is a graet tip. Thanks.

@LaserEngraving911 Жыл бұрын

Talc Powder.. its a great tool to have in your laser engraving business!

@Fury3D_Designs Жыл бұрын

Great video. Love that Dawn works so well. It is a lot less and easier to clean off than the orange blaze tape.

@LaserEngraving911 Жыл бұрын

It really is! Im not a fan of tape for that very reason!

@scottstuckey715 Жыл бұрын

So… the glass that I purchase for school through Dollar Tree will produce quality etchings… and the Dawn hack is money.

@LaserEngraving911 Жыл бұрын

Yes , and Yep!!🎉🎉🎉

@Alexzeroedin Жыл бұрын

This video is godsent now that I’m trying to get into engraving glass. I keep getting different results even with some blazer orange tape.

@LaserEngraving911 Жыл бұрын

awesome! I never use tape of any kind as you see in the video, just dial in your setting and use some dish soap IF you even need it, usually just for thin glass, glad it helped!!

@JohnUftring Жыл бұрын

Thanks Michael, timing is everything, and yours is good. I've not used the rotary or done glass on my diode lasers yet, but will soon, and the info you provided will help. Talc to see the laser point is a nice touch.

@LaserEngraving911 Жыл бұрын

Glad it helped, and thank you for taking the time to watch and comment!

@LaserEngraving911 11 ай бұрын

Winner! Winner! Chicken dinner! Contact us at whatsup@sonomalaserengraving.com to claim your FREE Arkfeld UV FlashLight as the giveaway winner!

@JohnUftring 11 ай бұрын

@@LaserEngraving911 Yeah man! Thanks a ton, email sent!

@niagarawarrior9623 2 ай бұрын

Great video, very informative. i plan on buying a xtool s1 (40 / 2w IR) to laser etch glass bottles for my hot sauce. Do you think the machine is capable of reliable etching the glass? Is there any notable difference between etching the glass while empty, or while full?

@LaserEngraving911 2 ай бұрын

Dont get the S1 for engraving on glass. The S1 is a diode laser and cannot engrave glass without doing a whole bunch of work arounds, its not the right laser for the job. You want to get the P2 "Co2" laser from xtool 55watt with rotary tool check this link out shrsl.com/4fnxt The P2 is a great laser for doing glass, and you can do the glass bottle full or empty doesn't matter. Hope that helps

@AndreFrego 11 ай бұрын

nice video! Thanks for all this tips! is it possible to use a fiber laser to engrave glass?

@LaserEngraving911 11 ай бұрын

Thanks! no unfortunately you cannot use a fiber laser with glass, but you can look at UV lasers for glass, there are lots of videos on this, the main lasers for use on glass are Co2 and UV lasers.

@user-li9nw6be9e 7 ай бұрын

Love the video and explanation. Really helpful. is there absolutely no way to get a gold engraving? I only see 'white/silver' engraving results. How would I be able to get a 'gold' engraving?

@LaserEngraving911 7 ай бұрын

There is but it involved a different process, see how the pros do it here. kzfaq.info/get/bejne/jbSSn8hkur7OoYE.html you will need a sandblasting cabinet and lots of other fun toys.

@directedt3ch Жыл бұрын

Love the close up views! Any idea what 40% speed equates to in mm/sec on your Epilog? I've always engraved glass at much lower power even on my 60W. I think I found my sweet spot to be around 200mm/sec at 19% power.

@LaserEngraving911 Жыл бұрын

Thanks! The Epilog In The video is the M2 Fusion max speed is 3048mm/sec so 40% of that would be the answer, so 1219mm/sec, I think my setting works for me cause if the speed that available on this machine, plus having the 120watts, I think if your setting sound like a good stating point, try messing around with difference dither patterns too!

@directedt3ch Жыл бұрын

@@LaserEngraving911 Thanks! When I saw 90% power my first thought was WHAT?!? But then I thought about how fast those Epilogs move :) Appreciate your tips!

@drburden54 Жыл бұрын

Do you find there is a big swing in power settings and speed from different glasses, or once you find one good power and speed setting it works all of the time?

@LaserEngraving911 Жыл бұрын

Once You have the setting, your pretty much golden on most glass, however for thin glass you need to power down a bit, so bets to create a setting for thin glass and thick glass. 👍👍

@paqratst1 Жыл бұрын

Would the talc powder show up on the uv laser?

@LaserEngraving911 Жыл бұрын

I dont have a UV laser, I only have used this on Co2 and Fiber Lasers and it works great, You should give it a go and report back to us! here! I have a feeling it will be fine. 👍