Powder Coating With Lasers..Kinda | A New Way To Fill Your Engraving With Vibrant Color

Рет қаралды 273,840

Күн бұрын

In this episode of Laser Engraving 911 I will show you a new and exciting way to color fill your engraving with powder coat paint! No masking required, no weeding, and easy clean up. In this video I'll take you through the whole process step by step, so you can start making your engravings pop with color powder power! 🤣Check the link below for all the juicy info!🤣
🎁Want to try it out yourself? You can buy a sample pack of powder coating paint from me here: www.sonomalaserengraving.com/...
✅Private 1 on 1 Consulting With Michael Laser Engraving 911
sonomalaserengraving.com/prod...
🍩www.buymeacoffee.com/laser911
__________________________________________________________________
Time Stamps:
00:42 What is traditional powder coating? Explained (roughly)
04:10 What does powder coating have to do with laser engraving.
04:50 Showing examples of what finished products look like.
07:53 How to apply the powder coating paint to your engraving.
16:32 Helpful Tips Do's and Don'ts and What Materials Work and Don't Work.
18:30 Watching the process of the GOT box being made (narrated)
21:31 Close up view of the GOT box after completion.
22:13 Time-lapse of the sample board, all colors being heat set at once (narrated)
22:39 Close up look at the sample board.
23:31 Wrap Up and After Thoughts.
25:03 Where to get a sample pack of all these colors to try out!
🎁Want to try it out yourself? You can buy a sample pack of powder-coating paint from me here: sonomalaserengraving.com/prod...
❤Laser Setting I Used In This Video❤
My Machine: Epilog M2 Fusion 120watts
Wood Engraving: 90speed / 60% Power/ 400dpi
Powder Coat Melt Pass: 90speed / 13% Power / 400dpi
👀Contact Me Directly www.laserengraving911.com
🍩MY FAVORITE LASER TOOLS AND MUST HAVES FOR MY SHOP🍩
Laser Glasses: For Fiber Laser amzn.to/2CKdrBi
Scotch Blue Tape: amzn.to/2NzEIZn
Weeding Tool: amzn.to/2Vgrfdd
Spray Paint Clear: amzn.to/2YBOxwk
F Clamp Vice : amzn.to/2Vlllr3
Brilliance Laser Ink : amzn.to/2YCcpQh
Decimal Ruler: Machinist Ruler amzn.to/2VlySyO
Data Vac Blower: amzn.to/2ZblxdM
Pana Vice: amzn.to/2BKyCm1
🚨Great Resource For Laser Engraving Equipment and Supplies
laserengravingsupply.com/
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
Want to Buy These Powder Coating Paints in Bulk? Here are the links
Black Powder Coat Paint ebay.us/WiNZRr
Red Powder Coat Paint ebay.us/B47WAl
Yellow Powder Coat Paint ebay.us/tGyBIl
Gold Powder Coat Paint ebay.us/5JTSuc
Purple Powder Coat Paint ebay.us/FkTa33
Blue Powder Coat Paint ebay.us/eIh1Nv
White Powder Coat Paint ebay.us/h8kbnr
Silver Powder Coat Paint ebay.us/sU6srV
Green Powder Coat Paint ebay.us/9eNYYF
#powdercoating #colorengraving #engravingtutorial

Пікірлер: 1 300

@thetruthserum2816 2 жыл бұрын

Awesome idea! Make sure to "turn off the air assist" before you run it, or the powder will go flying!

@dian3145 Жыл бұрын

The Alton Brown of lasers 😀 Love the addition of the science behind how things work. In the middle if a bing!

@LaserEngraving911 Жыл бұрын

😀

@timberry7832 Жыл бұрын

Being a former printer for 30 years, I been looking for something I can do on my own that I could be good at. This could be it, thank you for sharing your knowledge and experience. Best Wishes, Tim

@LaserEngraving911 Жыл бұрын

Thanks Tim!

@imperlast2 Жыл бұрын

as a former powder coater this is one of the best descriptions of powder coating iv seen and for temp its normally around 400 and for 20 mins

@LaserEngraving911 Жыл бұрын

Im Flattered! Thanks! 😁

@sitgesvillaapartmentneilsc7924 2 жыл бұрын

Absolutely amazing, thanks for all the hard work in revealing this....Plenty of new options with this now. Incredible.

@jemlittle1787 Жыл бұрын

Best thing ive seen in lasers for ages

@LaserEngraving911 Жыл бұрын

Awesome

@dannybush6131 2 жыл бұрын

This is awesome. I have powder coated for years and this is a great new use for this material. Thank you for the idea this rocks.

@antonwinter630 2 жыл бұрын

that comes out so good. love to see how well it comes out on acrylic

@LeonvanZyl_birder 10 ай бұрын

Your drawing of the powder coat paint-gun made me laugh so hard I almost fell of my chair!! 😀 very funny, but the idea is awesome! Will definitely use this idea somewhere...

@LaserEngraving911 10 ай бұрын

Ahhh Thanks!

@lissy6213 Жыл бұрын

So I tried your technique with a 5.5 W diode laser and embossing powder for paper crafts and it worked too😊 thank you for the inspiration to give it a try

@LaserEngraving911 Жыл бұрын

Your Welcome!!

@djjohnny8149 Жыл бұрын

Would you share the settings you used with your 5.5 Watt diode laser? I have a 5.5 watt diode laser also and it would give me a nice starting point. Thank you in advance!

@lissy6213 Жыл бұрын

@@djjohnny8149 Settings: 2.800 to 3.000 speed and 20% power. I‘ve tried different embossing powders and achieved the best results with crafts & co powder. Just make sure to clean the laser afterwards🙂

@cathymyers7831 Жыл бұрын

Do you have a picture of your paper creation. I am curious to see the laser used on paper. Thanks!

@lissy6213 Жыл бұрын

@@cathymyers7831 No, sorry, I used the embossing powder (for paper crafts) on plywood, maybe it was unclear🙈

@phatwizard Жыл бұрын

This amazing! Thank you for sharing your experiments and successes with us!

@kathleenedwards3491 2 жыл бұрын

This is absolutely the best engraving idea I have seen yet!! I am new to the engraving world and am also an Epilog user as well!! Thanks so much and look forward to more great info from you --- thank you :)))

@LaserEngraving911 2 жыл бұрын

Thanks you for your support and kind words, hope you have fun with this method!!

@johnsmith-000 Жыл бұрын

This is really a fantastic idea. Much like Tim below, I'm a former screen printer of 20+ years, and screen printing is an area where you have to improvize with materials and inks, invent jigs for different objects etc. Still, although I've bought a number of powder coat paints and the gun you described accurately enough, and that I do have a K40 laser, I never thought of trying this, and I can't wait to try it. I'm really happy I stumbled upon your clip, thanks! I liked it and subscribed, don't want to miss the next idea:)

@LaserEngraving911 Жыл бұрын

Awesome!

@thethriftychristian82 2 жыл бұрын

This channel is growing because of your innovation. I have been researching lasers and was looking to find a way to make leather patches with color. So hopefully this will work on leather. If so then I'm all in!

@LaserEngraving911 2 жыл бұрын

Thank You for the support, I did mention I tried it on leather and my results where not that spectacular, but maybe you can keep tinkering with this process as a starting point and get it the way you want. Good Luck.!

@paulbavington4196 Жыл бұрын

@@LaserEngraving911 I'm going to try creating a leather emboss/deboss die, stamping the leather with a press, filling the debossed area with powder coat and then trying a melt run with the laser. Could export the die file as SVG and then invert it for the color melt.

@jaimiebanks3179 2 жыл бұрын

This is truly impressive! I can’t wait to try this!

@shadowliving6858 2 жыл бұрын

Wow! This is such a great idea. Can’t wait to try it out. Thanks for sharing.

@KodyWebb 2 жыл бұрын

pretty good drawing for upside down!

@josiahdegroot5341 Жыл бұрын

Make sure you are wearing a respirator! The dust is so fine and the fumes of the melting plastic are highly toxic.

@kenthomas4479 10 ай бұрын

but not many will listen to that type of warning, even when this guy even says at start he is not a expert.. too bad he showing to use laser when theres a easier way

@Sakura0754 10 ай бұрын

@@kenthomas4479He's showing what people can do with a laser that people already have. How else would you do this without paint using a laser cutter? Without using a blowtorch and sanding

@lissy6213 Жыл бұрын

Thank you very much for sharing your experiments and awesome results with this powder.

@The57MetLady 2 жыл бұрын

Daym I am blown away!!!! Hadn't even contemplated this process, been using acrylic markers.

@SteveBatsford-tp1ho Жыл бұрын

I watched this video then bought some small jars of powder paint. Just finished my first trial. It came out great. I did 2 coats and it filled nicely. Although 1 coat was good, 2 coats covered the wood grain better. I'll be trying a multi-color design next. Thanks for the video!

@LaserEngraving911 Жыл бұрын

That's awesome!

@deborahzorn7549 5 ай бұрын

Steve, where did you buy the small jars of powder paint? Thank you!

@johnsimpson99 2 жыл бұрын

Awesome! Just tried a test piece and it worked great after a bit of trial. Going out to get some more colors tomorrow! Thanks so much for the video. And yes, like you said below - NO air. I normally have about 4psi on with air 'off' just to keep the lens clear but even that was enough to blow the powder away.

@LaserEngraving911 2 жыл бұрын

That's awesome, 👏👏

@johnsimpson99 2 жыл бұрын

@@LaserEngraving911 Been playing with the technique all afternoon, just realized if you defocus the laser by a few millimeters, the powder coat looks much nicer. I only have jet black to play with right now but the defocused test looks much better than all my other ones.

@LaserEngraving911 2 жыл бұрын

@@johnsimpson99 That's awesome, always nice see see more innovations!

@colleenkidd956 Жыл бұрын

Doesn't it hurt the laser to turn air assist completely off? I have a Thunder and have read so much about the risks

@jaredfillingim2282 Жыл бұрын

@@colleenkidd956 With the powder coat, you’re not really engraving. Normally the air is to keep fine particles, smoke, and other debris out of the nozzle to keep it clean. Once you get to the powder coat, the laser power is meant to be so low, you’re not engraving, but just melting the powder paint. There shouldn’t be any debris whatsoever, so in this case it should be safe.

@RossAlexanderSr 2 жыл бұрын

Incredible! I can’t wait to try this. Thank you for sharing this technique and for such a well done video!

@LaserEngraving911 2 жыл бұрын

Thanks Ross!

@skythemouse8855 Жыл бұрын

Great work! I was brainstorming this idea already but for metal. Good to know there has already been some success!

@ThomasEWalker 8 ай бұрын

I'm jumping into engraving as hobby, maybe side business, and your sample pack is perfect for experimenting! It's on the way! Thanks for doing that. I used to run a graphics studio plus did screen print production for a while, and I'm looking forward to getting back into production.

@LaserEngraving911 7 ай бұрын

Awesome!

@aaronalbee9080 Жыл бұрын

I decided I wanted to build cribbage boards in my garage and have been trying to figure out a cool way to make colorful tracks. This video solidified my decision to buy a 10W diode laser which I just got all set up... Super excited to give this a go! Thank you!

@LaserEngraving911 Жыл бұрын

Glad I could give you some ideas!

@merophosis 11 ай бұрын

How did that diode work out for you? I ask because the diode lasers have a cooling fan that usually blows down into the subject you are lasering, so I am worried that the poweder will blow out of the engravings.

@aleksanderchojan2128 10 ай бұрын

I wonder which settings are the best for 10W diode laser. My powder arrived today and I’ll give it a try tomorrow 😮

@maksl7389 10 ай бұрын

@@aleksanderchojan2128 let us know how it goes!

@aleksanderchojan2128 10 ай бұрын

Ok guys, this method works with Creality 10W laser module. I made speed/ power test grid and it seems that the effect looks better on higher power/ higher speed. I guess it’s because of higher penetration

@brkoury 2 жыл бұрын

This is a game changer! Thanks for this!

@HOUSTON713CHEVY 2 жыл бұрын

Can’t wait to try this thank you!

@prpman99 Жыл бұрын

Have you tried using the "print and cut" option in lightburn? Would allow taking project out of laser, apply powder and then returning to laser. I have an xTool D1 and will attempt this process. As previously noted could be an issue with the fan in the laser head. Will see. Thanks though, like the process.

@AxGryndr Жыл бұрын

If you are concerned about movement, you could always take a queue from us CNC engravers and use some of that blue masking tape, CA glue and accelerator to make double sided tape. This way you'd have a simple hold down that won't get in the way and it easy to remove when you are done.

@LaserEngraving911 Жыл бұрын

Yep, great idea as long as its easy to remove and clean up sounds great!

@AxGryndr Жыл бұрын

@@LaserEngraving911 You put one piece of blue tape down on your bed and one piece of blue tape on your material. The CA (super) glue you add a line our two on the tape you placed on the bed, away from the edges so it doesn't squeeze out. On the tape on your material you spray the activator. On most material the activator doesn't leave any residue but always test first. Then you line up your material over the tape on your bed and press down. The activator and CA glue react in a few seconds and bond together. It is surprisingly strong for just being masking tape. When you are done, a little force to pull away and the tape will let go off the bed or the material first and then you peel off the other. Most painter's and masking tapes leave little to no residue unlike other double sided tapes.

@TheKojak76 Жыл бұрын

I second this hold down method. I use the tape hold down method for both cnc carving and laser engraving. I haven't tried the powder coat filling yet but it looks like it's a great option to doing epoxy inlays. Thanks for the idea. I wonder how cerakote would work. 🤔 that would open yet another possibility, perhaps even be the answer to filling metal since they have some that require low or not heat.

@alexericson9402 2 жыл бұрын

Heck yeah! That’s really cool. We will definitely try this

@jasongreen3027 2 жыл бұрын

Awesome video. Can't wait to try this at home!

@ozloya 2 жыл бұрын

Hey, cool technique. Thanks for sharing. I've tried on leather before and works well, also on painted MDF. Tip: You can apply the powder without the first engrave and the melting plastic bonds to the surface.

@LaserEngraving911 2 жыл бұрын

Cool, thanks

@DannyMcLaneDC 2 жыл бұрын

That was my question! Thanks so much

@Patron77770 2 жыл бұрын

Like on acrylic ?

@ozloya 2 жыл бұрын

@@Patron77770 Works too, a bit smelly tho.

@WillNelsen 2 жыл бұрын

Very cool. I've been curious about the longevity of just this method. (application into wood). I've been mostly curious about different finishes and their interactions with the final "powder coat". I wonder if there would be any loss of adhesion with an oil finish vs a water based finish. IDK ... Perhaps a pull test? Haha. Keep up the great work man!

@cecycelaya1416 2 жыл бұрын

Fantastic information, really like to try this technique, thank you

@bartoplayer 2 жыл бұрын

This is amazing. Thanks for sharing!!!

@josephosorio5718 2 жыл бұрын

That is great. I experimented with this a few months ago and had some success with white tile. Your technique here should make this much easier and better. Oh, the powdered paint sticks very well to tile. I will try working with acrylic next. Thanks for the tips and instructions.

@LaserEngraving911 2 жыл бұрын

Nice one!

@kennuimuffins2426 Жыл бұрын

Very interested in knowing how this does on acrylic. I'm going through various infill techniques for acrylic a nd most of them just don't work that well. Some require too much time/labour to get a good result.

@LaserEngraving911 Жыл бұрын

@@kennuimuffins2426 This one works pretty good, I also like masking and using acrylic paint for filling acrylic, I have a video on that way too. Thanks!

@poshpol Жыл бұрын

Did you do it in two passes on the tile? Engrave the tile, put powder and re-engrave?

@josephosorio5718 Жыл бұрын

@@poshpol yes. But the second time around I greatly reduced the power and turned off the air assist.l, so ad to not blow the powder off the tile.

@LightPleasures 2 жыл бұрын

Super idea! I'm waiting on my sample paint to arrive and I will be video taping the process. I will be using a 15W Diode laser so my results will be unique. I will post a link to it once it's done (successful or not).

@LaserEngraving911 2 жыл бұрын

I think alot of folks would love to know! if the diode laser works, if it does that's awesome!

@themidniteryder 2 жыл бұрын

I have the Atomstack x7 Pro, and I would think the cooling fan on to of the head might provide enough draft to give issues on blowing the powder out. Certainly worth a try though.

@LightPleasures 2 жыл бұрын

So I have an Ortur Master 2, 15W engraver. I've been 'experimenting' with the powder coating paint I bought from you...(I'm going to need to order more soon). I managed to find a perfect solution to the cooling fan 'issue', which I figured out from the start. I'm in the process of recording video of my process and I'll be providing a link back to this video so others can buy your paint samples and begin their journey into painting by powder. Once I get my videos done, I'll launch my KZfaq channel starting with this process. Thank you for sharing!

@LaserEngraving911 2 жыл бұрын

@@LightPleasures great! I'm sure all the folks who have diode lasers will be stoked!

@aleksanderchojan2128 10 ай бұрын

@@LightPleasureshow did it go?

@cathymyers7831 Жыл бұрын

Like the final look of the painted engraving. Your video was great!

@Sakura0754 10 ай бұрын

Game changer. Truly thank you!

@grootjnr 2 жыл бұрын

Awesome idea. I cannot wait to try. One question. Do you turn your air off when doing the powder part? Otherwise would the air flow blowe the powder out? Thanks

@LaserEngraving911 2 жыл бұрын

You must turn off all air assist for this to work, there can be no fans of any kind blowing on the powder while engraving.

@icmpeko 2 жыл бұрын

Nice! I think I'll try running job 1 to engrave recess as normal (with air assist on) and then run job 2 (same art) w/ color mapping in the Epilog driver turned ON: set with the 13%p/90s/400dpi (or equiv for your machine) and UNCHECK air assist... 💗🐰👍

@cindyrobinson2618 2 жыл бұрын

That’s pretty amazing! I wonder if embossing powder would work as well?? It’s used for papercrafting usually and you use heat to melt it. Hmmm…might have to give it a try! Great video! Thanks for sharing!

@prod7054 2 жыл бұрын

Are you talking about gold and other metals. Like using leaf but more intense maybe. Be good to to hear results Cindy

@cindyrobinson2618 2 жыл бұрын

@@prod7054 its a powder that you sprinkle on embossing ink and apply heat to melt it.

@cindyrobinson2618 2 жыл бұрын

It comes in all different colors.

@SuperJoycem 2 жыл бұрын

@@cindyrobinson2618 I was wondering the same thing. If you try it would you let me know if it works please ? 👍

@youmightliketoknow Жыл бұрын

Yes, it does work. I have been doing it with my diode laser for a couple of years - the hard part is finding the right settings via trial and error, different colors required different settings as well (at least for diode lasers)

@jasonroberts8206 5 ай бұрын

This is great! Exactly what I was looking for.

@marymullen4262 Жыл бұрын

Absolutely fabulous!!!! Goodbye paint!

@elanvitality1899 2 жыл бұрын

Thanks for a very informative video. Just asking, can you add glitter to the powder and whether you would see a sparkling effect?

@LaserEngraving911 2 жыл бұрын

Hmmm, as long as the laser power your using only melts the powder coat paint and doesn't burn the glitter it should work I would think. What a cool Idea!

@TalkingGIJoe 2 жыл бұрын

they make additives for paint powder that have that effect...

@bdyer6football 2 жыл бұрын

Yes I am a powder coater in FL and have gotten a couple of signs custom made and tried something new that I added too the clear coat and worked great

@mattlikewise9431 2 жыл бұрын

Hello I was wondering since your not heating the paint will it eventually fall out or fade away down the line? I received a post from a gentleman who believes it’s gonna be messy in the end. Here is his message to me: I do powder and ceramic coatings for a living and that video was honestly hard to watch. There’s virtually no way to get lasting results from this method (aside from luck) as the substrate has to reach the cure temperature of the powder to get a bond. All powders have a specific gel/cure temperature and there’s no way to regulate that with a laser. Not trying to be a downer because you can get it to melt and look cool. Just want to advise folks to be careful selling projects like this because when an under or over cured powder fails, you will have some unhappy customers.

@LaserEngraving911 2 жыл бұрын

@@mattlikewise9431 I would say that even though your friend who sent you this has much more experience with coating metals , he does not have experience first hand with this process, and has not tried it himself most likely and is comparing the process for coating metals with this process, which is a different substrate, and used for a complete different purpose than coating metal parts, this process is a way to add long lasting color to your engrave on wood and acylic, not metal, and the things you will most likely color will not be used in the same way that powder coated metal items will be used, so the need to cure like you do on metal is mute. The melted paint stay in the engraving just fine for this purpose and does not flake out, or fade away like your fellow assumes. Unless you run your laser too hot and burn it up. Hope that helps answer your questions, and I hope you get a chance to try this method and see for your self what I mean. Good Luck!

@AllenMassey 2 жыл бұрын

I assume you need to turn the air assist off to keep from blowing the powder around, have you had any issues with the focal lens after doing this? Just a bit worried that the fumes from the paint melting may deposit on the lens.

@LaserEngraving911 2 жыл бұрын

yes, def turn off the air assist for sure, and no issue with the fume getting on the lens, my exhaust system pull those back and away from the lens. 😎

@melissahumes4912 2 жыл бұрын

@@LaserEngraving911 I tried to turn off my air assist in the layers section of lightburn and it still blows the powder coating out of the engraving. Any suggestions?

@christieclayton2909 2 жыл бұрын

@@melissahumes4912 if you have a Mira you have to disconnect the air hose it constantly blows. Not sure what laser you have, but still not getting good results trying to melt the powder myself

@nickolascastillo4019 Жыл бұрын

I was about to ask that as well.

@gilbertboyer9936 Жыл бұрын

Very very interesting. Well explained. Thank you for sharing.

@AhmadMabruriBBeruri 2 жыл бұрын

Hey dude! You give me a very brilliant idea! I've been figuring out the way to "print" color with my laser and you come up with this. And you know what.... I will even try multiple color in one design. Thanks a lot!

@LaserEngraving911 2 жыл бұрын

Go for it! That's awesome, thanks for your support!

@lightning4201 2 жыл бұрын

This is hands down one of the best videos that I've seen. Very innovative.

@LaserEngraving911 2 жыл бұрын

Thank for that, very motivating for me!

@designer-garb572 Жыл бұрын

This opens up a world of possibilities, what a cracking idea

@LaserEngraving911 Жыл бұрын

Nice!! Thanks for that!

@MichelHabraken 2 жыл бұрын

Thank you for sharing this, this is so much better then painting with normal paint 😊

@LaserEngraving911 2 жыл бұрын

My pleasure 😊

@PapaJohn70 2 жыл бұрын

I like the way you think! I love learning. Thanks so much!

@LaserEngraving911 2 жыл бұрын

Thanks for watching! appreciate your support!

@JimNichols Жыл бұрын

Innovation is an amazing thing!

@jmbadsector Жыл бұрын

Impressive, nice idea, I may try this!

@johnterrell101065 8 ай бұрын

AMAZING video!! Thanks so much for sharing!!

@LaserEngraving911 7 ай бұрын

Welcome!!

@thwohojr 2 жыл бұрын

That is awesome! I'll be trying this very soon.

@LaserEngraving911 2 жыл бұрын

Do it! 👍👍

@woodieaz 2 жыл бұрын

I found this video very informative and interesting. Thank you for sharing this with us.

@nathanwolf5547 6 ай бұрын

I am just starting out with laser so this has given me a view of the future. Thank you.

@LaserEngraving911 6 ай бұрын

Great Glad I could help!

@keksfabrik Жыл бұрын

Absolutely amazing idea... 😃

@Kwozziedoll 2 жыл бұрын

Thank you for sharing your knowledge

@timpawelk1792 2 жыл бұрын

I picked up some powder coat paint from a neighbor business a year ago and never got around to trying this. Great to know it works!

@LaserEngraving911 2 жыл бұрын

That it does Sir! Hope you have fun with it!

@Giaour 2 жыл бұрын

This is best laser use for engraving I have seen!

@LaserEngraving911 2 жыл бұрын

I don't know about all that , but it sure is cool, and fun! Thank You for your support!

@Angels_Ray 5 ай бұрын

This is Awesome 👍👍👍

@warrenking1815 2 жыл бұрын

Great idea, very innovative I will have to try this! Thank you!

@LaserEngraving911 2 жыл бұрын

You are so welcome!

@mikedtubey 6 ай бұрын

love it!♥ thanks!!!

@LaserEngraving911 6 ай бұрын

No problem 😊

@davidb1038 Жыл бұрын

Hello from the UK, great video I will definitely give this a go

@bryanwiley7345 2 жыл бұрын

Great video, great new media technique!!!

@LaserEngraving911 2 жыл бұрын

Much appreciated!

@michaelsharkey6268 2 жыл бұрын

Wow. Beautiful.

@hans-dieterjung4026 Жыл бұрын

Thanks a lot. A amazing job, a nice Idea, it helps me a lot.

@tomm57890 2 жыл бұрын

Color me impressed! 🤘

@paulraycastillo2238 5 ай бұрын

Definitely trying this!!! TY

@LaserEngraving911 5 ай бұрын

Awesome!

@hogdog53 7 ай бұрын

Excellent.

@henriquesantana9609 Жыл бұрын

GAME CHANGER! Thank you for sharing!

@LaserEngraving911 Жыл бұрын

Welcome!

@psyfusion Жыл бұрын

That was slick indeed

@kouthao4028 Жыл бұрын

Great explanation!!!! Wish all instructional videos were this good and just subscribed!

@LaserEngraving911 Жыл бұрын

Thank You!

@lauramcmurtry3164 Жыл бұрын

Wow! Thank you! def must try

@LaserEngraving911 Жыл бұрын

Its fun for sure!

@shirw9607 Жыл бұрын

Awesome technique! Thank you!

@LaserEngraving911 Жыл бұрын

Glad you got some value!

@panino04 7 ай бұрын

Stunning job! I'll give this more than a try once I get my new laser 👍

@eugenpopa9206 8 ай бұрын

Very well done. Really impressed.❤

@LaserEngraving911 7 ай бұрын

Thank you! Cheers!

@danofiremano Жыл бұрын

What a great Idea, thanks for sharing. I'm just looking to get into laser crafts, and this is a game changer for sure!

@LaserEngraving911 Жыл бұрын

Glad you liked it THX!

@Batendor 2 жыл бұрын

This amazing idea might actually save us from buying or outsourcing for UV printing! I can’t wait till I try that on acrylic. Thank you sir for sharing this with us.

@LaserEngraving911 2 жыл бұрын

Your welcome hope it works out great for you.

@LPTDC 5 ай бұрын

Great technique. Excellent job testing it and sharing it with your subscribers. Thumbs Up!

@LaserEngraving911 5 ай бұрын

Thank you very much!

@tedraortega Жыл бұрын

That looks great. I’ll have to try this.

@LaserEngraving911 Жыл бұрын

Awesome! Have Fun!!

@jrard92 2 жыл бұрын

Wow great technique to try. Great work

@LaserEngraving911 2 жыл бұрын

Thank You for that, and your support!

@dunnguitars733 2 жыл бұрын

Awesome....Picked up some cheap power from HF and it worked great. Thanks

@LaserEngraving911 2 жыл бұрын

Yes!. That awesome to hear. 😍

@joephoenix7053 2 жыл бұрын

Great idea. I have been masking and painting however this would work much better for my wood products. Thanks.

@LaserEngraving911 2 жыл бұрын

Great, I think both this and way and masking and painting are great ways to color fill. Each has their own cool vibe.

@ZERGG0 4 ай бұрын

This an awsome and really sucessful experiment. Great result! Thank you for sharing 👍

@LaserEngraving911 4 ай бұрын

Thanks for watching!

@christinachehade8231 Жыл бұрын

I love this, can't wait to try it out!

@LaserEngraving911 Жыл бұрын

Have fun!

@IIIofV 2 жыл бұрын

Love it, thankyou! subscribed !

@LaserEngraving911 2 жыл бұрын

Awesome Thanks!

@johndiego3105 3 ай бұрын

Wow, that looks amazing to me!!

@LaserEngraving911 3 ай бұрын

Nice!

@docmortal 2 жыл бұрын

Thanks for sharing !

@VeeSwan Жыл бұрын

I was wondering if this would work, I'm so excited to see you have done it, it is fabulous!

@LaserEngraving911 Жыл бұрын

Thanks! means alot to me!

@magnusltd 2 жыл бұрын

Wow! Really cool. Thanks!!

@LaserEngraving911 2 жыл бұрын

Glad you liked it!

@beezyv-dx5bb 11 ай бұрын

This is GENIUS!!!😎😎

@LaserEngraving911 11 ай бұрын

Why Thank You!

@a.j.merrifield7558 2 жыл бұрын

What a great idea!!!

@LaserEngraving911 2 жыл бұрын

Thanks A.J!

@gordonrain7152 2 ай бұрын

Howdy pard' For the record I've watched a few of your videos and genuinely appreciate your 'brand' of sharing the information you do with us heathens. And you do a fine job of speaking in a non-condescending tone as well. Kudos for that. Your technique share in this video is one I've already brain-bashed a wee bit myself...you just did the precursor work for me and again, that is appreciated. As a now retired Architect/Engineer it is my curse to pick apart techniques. And the only critique I have of your methods are the physical contact with the project whilst drawing the "hard card" across the face of the piece. That is the only primary weakness in your methodology. You were obviously adept at doing so but it would be so easy for the piece to move ever so slightly. For me personally that's not an issue because I secure my pieces down using a woodworking technique I'm used to using but others should be wary of that ever so slight direct contact. It also appears that the colourization shrinks down below the surface (which is good) allowing for top coating the final piece. MANY thanks for taking the time to share this with the rest of us and confirm my theory at the same time....because of your efforts, I will be Subscribing!

@LaserEngraving911 2 ай бұрын

Excellent feedback thanks!