Making a backplate for my brand new four jaw chuck.
Пікірлер: 107
@andrewdolinskiatcarpathian2 жыл бұрын
What I like the best about you is not that you see a problem, you see a solution. Your ability to machine a solution out of what looks like scrap is a lesson to us all. Think outside the box and just do it. Voila, you did and it worked 👏👏👍😀
@Rustinox2 жыл бұрын
It's like a puzzle. You just have to fit the pieces.
@normsweet1710 Жыл бұрын
Clear and precise way to measure point to point ! Good example of using what’s at your disposal to hold down cost 👍
@Rustinox Жыл бұрын
Thanks. For bolt holes this will do :)
@NAPALMGАй бұрын
🎉🎉🎉Thanks for your knowledge that sharing with us 🎉🎉🎉
@RustinoxАй бұрын
My pleasure.
@Just1GuyMetalworks3 жыл бұрын
When faced with difficult problems sometimes you gotta think outside the box, well done 👍😁👍. Glad to see you hitting the shop, especially with a big job like that! Thanks for the share, Michel! Wishing you many hot nurses at the hospital 😉. Cheers!
@Rustinox3 жыл бұрын
Thanks Chris. Thinking out of the box is indeed a big part of the challenge.
@28gwdavies3 жыл бұрын
Another great video where I learned a lot, thank you very much Michel. Wishing you well with your hospital visit, and keep your mask on when you're chasing the nurses down the corridors!
@Rustinox3 жыл бұрын
Thank you, Glyn. Don't worry, the nurses survived.
@colinsalter35163 жыл бұрын
great job ! All the best for the hospital visit .
@Rustinox3 жыл бұрын
Thanks Colin. All went well.
@brianhauck11183 жыл бұрын
Perfect timing. I am cutting a backplate for a new chuck for my dividing head. Thanks for your videos and your courage. Peace.
@Rustinox3 жыл бұрын
Thanks Brian. I hope it give some ideas.
@johnmettler9952 жыл бұрын
Another great vid Rusty. Hope things go well for you.best wishes U.S.A.
@Rustinox2 жыл бұрын
Thanks John. I'm OK.
@TheKnacklersWorkshop3 жыл бұрын
Hi Michel, Good to see the way you make a backplate... I hope the next couple of days goes well. Take care Paul,,
@Rustinox3 жыл бұрын
Thanks Paul, they will.
@LetsRogerThat3 жыл бұрын
I'm facing the same problem to make a backplate for my new larger chuck. I will follow your example. Thanks for the video
@Rustinox3 жыл бұрын
Go for it Gilles. Glad it helped.
@fredsmachinewerks48113 жыл бұрын
Hey Rusty Awesome job.on the backing plate And all the best when you come out of the hospital. Well see soon. Cheers Fred
@Rustinox3 жыл бұрын
Thanks Fred.
@swanvalleymachineshop3 жыл бұрын
Good one Rusty . Cheers .
@Rustinox3 жыл бұрын
Thanks Max.
@AlmostMachining3 жыл бұрын
Awesome adapter for the new chuck! Stay strong!
@Rustinox3 жыл бұрын
Thanks.
@mikebarton32183 жыл бұрын
Great solution. All the best for your hospital visit Michel. Mike
@Rustinox3 жыл бұрын
Thanks Mike. Everything went well.
@oldschoolengineer583 жыл бұрын
Ey up Rustinox! its truly great to see you back in the shop doing a bit! Keep safe brother.
@Rustinox3 жыл бұрын
Thanks Roy. I will.
@trits42273 жыл бұрын
Look forward very much to seeing the in operation, Stay well my friend, our friend, we all need more of youre videos and humour!!! Regards Mike and Laine
@Rustinox3 жыл бұрын
Thanks Mike. You will.
@kentuckytrapper7803 жыл бұрын
Excellent job, that was alot of work for a small lathe but you made it work. Great job man.
@Rustinox3 жыл бұрын
Thanks. It left me a bucket full of chips.
@neilgarrad49313 жыл бұрын
Thanks
@Rustinox3 жыл бұрын
Thanks for your time.
@kenjohnson6338 Жыл бұрын
Just done a 2 plate kit for a optimum 250 4 jaw, onto a minitor d360.... what a blast..lol.. near completion.. tomorrow just taper to do on quick release mechanism..
@Rustinox Жыл бұрын
Nice. Go for it.
@yvesdesrosiers23963 жыл бұрын
Bravo! Very well done! Thanks for sharing
@Rustinox3 жыл бұрын
Thanks Yves.
@josephleister91983 жыл бұрын
Good video...thank you
@Rustinox3 жыл бұрын
Glad you liked it, Joseph.
@briansmart20453 жыл бұрын
G’day Rusty , thanks very much for the video and that all goes well for you with the hospital visit .
@Rustinox3 жыл бұрын
Thanks Brian. Hospital visit wos ok.
@wheels21993 жыл бұрын
Greetings from New Jersey USA, great job as usual and I’m looking forward to seeing the finished product. I hope and pray that everything goes well at the hospital 🙏 Eddie wheels 🧑🏻🦽😜
@Rustinox3 жыл бұрын
Thanks Eddie. Hospital visit was ok. I'm fine.
@kimber19583 жыл бұрын
Your way gets the job done !!! Have a good day, week , month, what ever . Take care
@Rustinox3 жыл бұрын
Thanks. It works, that's what counts to me.
@normanfeinberg99683 жыл бұрын
Good to see your back
@Rustinox3 жыл бұрын
Alive and kicking.
@EverettsWorkshop3 жыл бұрын
Hey, nothing wrong with how you mounted the chuck, you did it how you could with what was at hand. I for one appreciate how you do things in your shop and like to get ideas from your work too. That chuck will be very handy for you.
@Rustinox3 жыл бұрын
Thanks Everett. With a bit of imagination you can do a lot.
@trits42273 жыл бұрын
Hi Rusty, That was a big chunk of metal you turned there nice one and nice looking chuck. Looking forward to seeing the finished chuck. Good luck for the future, Kind regards Mike
@Rustinox3 жыл бұрын
Thanks Mike. One day you will see it in action.
@joeduda85073 жыл бұрын
Thanks for the great info and video it is a good way to do it that i have never seen. Stay safe
@Rustinox3 жыл бұрын
We do with what we have. Don't we?
@PedroMoralesRuerte3 жыл бұрын
Michel good afternoon: yes you will survive with the grace of God he will give you many years of life and in good health have faith my friend: I am also doing medical follow-up due to having smoked for many years now comes the consequences, thankfully I stopped smoking in time, just taking small drugs to recover bad things from God.
@Rustinox3 жыл бұрын
And indeed, i survived :-)
@PedroMoralesRuerte3 жыл бұрын
@@Rustinox Friend God is with you friend: And may he bless you
@TomMakeHere3 жыл бұрын
Great work. Good to see you are able to get more workshop time to help with sanity
@Rustinox3 жыл бұрын
Thanks Tommy. To stay busy is the best way to heal.
@Rabb8653 жыл бұрын
I just subscribed to your channel I love your videos your an inspiration to me, thank you sir for all your videos, I pray you get well
@Rustinox3 жыл бұрын
Thanks for your kind words and your time, Yas Am.
@JourneymanRandy3 жыл бұрын
Nice work. You will love having a four jaw chuck. Take care
@Rustinox3 жыл бұрын
This one comes from Amazon. 108€ plus shipping. I think it's not too expensive.
@EmptyPocketProductions3 жыл бұрын
Great video, Been following you for some time now - Gluck with your medical procedures!
@Rustinox3 жыл бұрын
Thanks Chris. Everything went well.
@wayneacaron87443 жыл бұрын
and nicely done at that! poppy's workshop says HI
@Rustinox3 жыл бұрын
Thanks.
@MattysWorkshop3 жыл бұрын
Gday, certainly a great job done, my lathe is the same, I can’t cut the same thread as the spindle, it’s a bugger really, I hope all goes well at the hospital mate, please take care mate, I looking forward to seeing the 4 jaw I action, Cheers Matty
@Rustinox3 жыл бұрын
Thanks Matty. You will see it in action one of these days.
@christophermaurer12713 жыл бұрын
Michel, I have not been getting notified about your uploads and some others . It may be just my computer or maybe You tube. Good to see you again and thank you for taking the time to upload . Cheers from Australia.
@Rustinox3 жыл бұрын
I didn't change any settings in KZfaq. I told you this channel is a bit bizar.
@RolingRandom3 жыл бұрын
Great chuck removal system :) I think I would have mounted the backplate directly onto the chuck without that spacer.
@Rustinox3 жыл бұрын
Thgat was my first plan. But my lathe can't make the thread pitch that's on the spindle nose.
@RolingRandom3 жыл бұрын
@@Rustinox I mean mount the chuck directly to that back plate you have in the video. Sure it's smaller than the chuck but I don''t think that's a problem.
@RaptorMachineToolCo3 жыл бұрын
Good job Rusty.. B well!!!
@Rustinox3 жыл бұрын
Thanks. I will.
@techronmattic58763 жыл бұрын
Nice work, hope everything goes well with your hospital visit
@Rustinox3 жыл бұрын
Thanks. Everything went fine.
@userwl28503 жыл бұрын
I've just discovered you're not well. That's sad to know. Let's trust the doctors do their best to help. Get well soon Michael.
@Rustinox3 жыл бұрын
Thanks David. The doctors do a great job. I will be OK.
@eyuptony3 жыл бұрын
Good to see you back Rustinox. Back plates spot on. Let us know what you think of the chuck when you've used it for a while. Tony
@Rustinox3 жыл бұрын
Thanks Tony. I will.
@sparkiekosten59023 жыл бұрын
How nice is it when you bring out the shine in a rusty old piece of metal? The joy I get from watching it turn into a shiny object is most satisfying! Just as a side note when you measures the holes for the chuck to mount to the backing plate you could have used a set of centre punch transfer set as well instead of measuring? I hate mathematics so I will do that as a last resort! Keep up the good work!
@Rustinox3 жыл бұрын
I hate maths as well. That's why i prefer using a construction method with the dividers.
@longcaster3 жыл бұрын
Nice.
@Rustinox3 жыл бұрын
Thanks.
@chuirios3653 жыл бұрын
Toolmakers always do machine projects to satisfy they're needs. Given the situation with that odd thread, I would have done the same thing!
@Rustinox3 жыл бұрын
And it works.
@LetsRogerThat3 жыл бұрын
Michel I need your assistance. I got my 8 inch round stock but started wondering if machining it while bolted to the current backplate might introduce concentricity issues if the 4 holes for the 4 jaw are not the same concentric as the 3 holes on the current backplate. How did yours turn out? Any issues after you attached it the the 4 jaw? I have a backup idea and need feedback. Screw the current backplate to the lathe, then bolt the new round stock to the back of the 4 jaw and grab the 4 jaw to the old backplate. This way all the machining would be on the new 4 jaw and would in theory avoid any concentricity issues. Your thoughts?
@Rustinox3 жыл бұрын
As you can see in the video, I first turned the diameter that regisrers on the smaller (original) backplate. From the moment that is done you can flip the part and work the other side. You can take it off and mount it back again as much as yoy want. It will be repeatable and concentric. I hope this helps.
@LetsRogerThat3 жыл бұрын
@@Rustinox merci 😊
@gogoubai5 ай бұрын
Looks like a machinnest version of Jimmy Page.
@Rustinox5 ай бұрын
Lol :)
@CraigsWorkshop3 жыл бұрын
Hi Rusty, great to see a video from you. I love recycling old materials too. I like your method for making the backplate adapter. Will you still have access to your three jaw chuck? Cheers, Craig
@Rustinox3 жыл бұрын
Yes, easy. Just take out the 3 bolts on the small plate and put the 3 jaw on.
@howder19513 жыл бұрын
Looking good Michel! Nice chuck and don't you love turning a piece of rusty scrap into a finished piece? The lathe is like my motorcycle, as the guy at the shop said, it is only a down payment on the accessories . Cheers and looking forward to seeing you in a few days!
@Rustinox3 жыл бұрын
Thanks How. I always try to use scrap to make useful things out of it.
@howder19513 жыл бұрын
@@Rustinox Very nice collection of comments Much, I am glad to see everyone is wishing you well, and I hope all goes well for you as well, two thumbs up!
@terrycannon5703 жыл бұрын
Take it easy on the nurses. Many of us are praying for you.
@Rustinox3 жыл бұрын
Thanks Terry. Everyting went well. The nurses are still alive too.
@terrycannon5703 жыл бұрын
@@Rustinox Great glad to hear that. We prayed for the Nurses too. LOL
@argee553 жыл бұрын
Very bizarre video. Hope all goes well at the hospital. 😀